Zhengzhou Textile Machinery: JWF1204A Portable Single Roller Carding Machine Exhibiting Strength

Zhengzhou textile machinery is the first independent production unit of blowing and carding equipment in China. After nearly 20 years of market development and innovation, its blowing carding technology has made great progress, and has occupied the highest share of domestic and foreign combing equipment at home and abroad. It is the leader of the domestic blowing carding technology and the high quality representative. 2010 China International Textile Machinery Exhibition and ITMA Asia exhibition, Zhengzhou textile machinery company will display independently developed JWF1204A single pin roller carding machine.

The complete set of Zhengzhou blowing carding unit is designed for the purpose of research and development, such as fine gripping, uniform mixing, free loosening, early falling and less crushing, thin feeding, light combing, short mixing and short velvet, and long velvet. The cotton grabbing machine adopts the double direction hand grip cotton with double wound blades, which is combined with the stepless frequency conversion speed of the doubles hand, with the speed of the driver, the depth of the cotton and the speed of the walking speed to realize the fine grasping. The feeding and free opening of the single and double axial flow are used to open the cotton and complete the early breaking, less crushing and high-efficiency impurity removal. The uniform cotton mixer with different feeding and simultaneous output is integrated with the cotton cleaning machine combined with the comb, sawtooth comb and negative pressure and impurity removal, which effectively stabilize the quality of the post process, eliminate the difference of the color of the latter process, remove the fine impurities and the seed chips with fibers, and do not hurt less injury fibers, and reduce the production of neps. Online, scientific and flexible noil control system can increase the rate of production and maximize the benefit of users. The continuous feeding system integrated with grasping, opening, mixing, cleaning and carding ensures that the technological operation rate is 100%, the stability of the sliver is quantified and the evenness is improved.

The high production carding machine produced by Zhengzhou textile machinery is developed on the basis of the introduction of digestible German Te Luth Le advanced technology. The technology has a high starting point, and now it has achieved the serialization of single needle roller and three pin roller, the standard machine width and wide machine series are serialized, and the Xilin center is high and low serialized. Carding machine is not only suitable for blowing carding system, but also for roll forming process. The representative models include FA224B, FA221D, FA221E, FA225, JWF1202, JWF1204A, JWF1204A-120, JWF1206, JWF1206-120 and so on. The common features of the carding machine developed by Zhengzhou textile machinery company are: all cotton feeding structures are in a longitudinal direction, and the rack adopts the whole steel plate welding structure, with small vibration, convenient horizontal adjustment and fast installation. The cylinder, doffer, and thorn rollers are all made of steel coil structure with high dynamic balancing accuracy and low noise. The bottom of the cylinder is made of aluminum alloy suction and cover plate closed structure, and the air flow is stable. All kinds of synchronous belt drive aluminum alloy movable cover plate has been adopted, except for individual models. The multi-point continuous suction and suction system of the whole machine adopts a clean and transparent and integral shape suction hood, with less dust inside and outside the workshop and clean workshop environment.

The cotton machine adopts elastic holding and feeding cotton in a straight direction to reduce fiber damage; the Xilin center elevates and the combing area increases by 36%, which improves the quality of raw bar carding. The first dust removal cutter location in the needle roller area can be adjusted to facilitate cotton saving; the front and rear fixed covers and universal cover plates and general suction ports can be interchanged according to the requirements of spinning raw materials and varieties, and the process has strong spinning ability; the aluminum alloy movable cover with toothed belt transmission has stable transmission, quick disassembly and assembly and convenient maintenance; the high-strength aluminum alloy profiles are widely used at the bottom of the surrounding forest and the bottom of the doffer, and the surface is bright and clean, the accuracy is high, and the spinning technology is good. The core of the electric control adopts PLC and data communication technology, which has high reliability and convenient operation and maintenance. Independently developed by Zhengzhou Textile Machinery Co., Ltd., currently in the market leading JWF1204A type single needle roller comb. The machine is mainly used in blowing carding system. The output is up to 100 kg / h. The size of the machine can be reduced by the same size, with compact structure and small floor area, which can effectively reduce the investment cost of users.