Attention Should Be Paid To The Application Of Anti Slip Method In Sole Pattern Design.

The phenomenon of slippage on the road is mainly Sole The friction force between the ground and the ground decreases to a certain extent. When designing outsole patterns, the anti slip methods often used are mainly grasping and absorbing.

There are two ways to catch the ground on the ground: one is to reduce the peak, that is to reduce the peak, that is to reduce the corolla, so that when the shoe is worn on a soft road, the corolla can be more or less inserted into the ground to play the role of anti slip; the two is the thin design of the floral pattern, when the shoe is worn with this pattern, the outer bottom is subjected to pressure, the flake pattern is easily toppled, the toppling film increases the contact area with the ground, and thus produces better sliding resistance. This pattern is suitable for the harder and smooth ground. Another design method for anti slip of outboard pattern is adsorption.

Adsorption causes the whole or part of the outsole to be absorbed on the ground so as to achieve the purpose of anti slip. There are two ways to design the skid resistance by adsorption. The overall adsorption is to contact the ground around the bottom, and other parts of the outsole do not contact the ground, making the outsole a bottomed leather bowl, which adsors the ground after pressurization, but this adsorption method generally requires a flat bottom.

In the past ten years, the bottom of the moulded outsole tends to have a certain front warping so as to meet the need of bending when the foot is moving. Therefore, it is difficult to achieve the overall adsorption. Instead, it takes local adsorption. The local adsorption is the several parts of the front and rear heel of the outsole, and designs the suction cup of the bowl shape. When the shoe is bent, when the sucker touches the ground, it plays the role of anti sliding.