A Practical Method For Controlling Fabric Pilling

It is not easy to pilling during yarn and fabric production.

。

In the jet dyeing machine, lubricants Lubsoft is used to prevent friction during pretreatment and dyeing. When using reactive dyes dyed cotton and polyester / cellulose fiber blended fabric in the jet dyeing machine, sodium sulfate can be used instead of common salt.

Proper heat setting is applied to polyester / cellulose fiber and polyester / wool blended fabric, so that the yarn can be shaped and properly fed.

Shearing at the same time brushing can remove surface fibers and protruding fibers.

Both sides are singled to remove surface fibers and protruding fibers.

For polyester and polyester / cellulose fiber blended fabrics, partial alkali reduction of polyester components can reduce the strength of polyester, so the pellets are easy to remove.

For cotton and polyester / cellulose fiber blended fabric, Cellusof-L is used; wool or polyester / wool blended fabric is polished with suitable enzyme.

Yes

Polyester / wool and cotton fabrics are treated with special assistant Saraglow-CL in jet dyeing machine. The middle and special weave fabric with high shrinkage ratio of warp and weft yarn is too small, or the side yarn itself is out of order. It can not withstand the severe friction of reeds during beating up. It will cause broken edges and small rotten edges to be washed by clothes rotating cage to remove surface fibers.

Dosage should be appropriate to avoid excessive softness and lubrication. Otherwise, the fiber will move to the surface, and the needling roller in the support box will be obstructed, such as short silk, falling pulp and falling objects, which will affect the inflexibility of the roller and cause the speed of the needle roller to be inconsistent with the cloth surface.

Cause pilling.

Using special finishing agent, such as Sarafeel-jy/Sarafeel-763, special silicone compound can be given.

Softness and ball raising through film forming, improper weaving of temperature and humidity in weaving workshop, is the most prone to produce large area defects. Especially when weaving viscose fabric, it is more sensitive and influential. Sarasoft-MR organosilicon polymerization finishing agent has film forming properties and can improve wear resistance. Garfinish-As has the characteristics of anti pilling and scratch resistance, and can be added to traditional finishing liquid formula.