The Four Step Is To Hide Your Winter Shoes.

During the season, the whole family's winter shoes are fully absorbed. Besides being patient enough and resourceful, you need to take the following 4 steps: deodorization, cleaning, plastic surgery and storage.

Step one: deodorization

Before receiving, first remove the peculiar smell in the shoes. A simpler way is to replace the insole, which not only can quickly remove odor, but also reduce the number of bacteria in the shoes.

If the odor is heavy in the shoes, a small amount of ball powder can be evenly sprinkled under the insole, which can effectively reduce the odor in the shoes.

The second step: cleaning.

Leather boots: for leather boots, wipe the entire pair of shoes with soft, clean cotton cloth first, remove the dirt on the surface and easy to scrub dirt; then use soft cloth to dip some special leather cleaner, focus on the special dirty parts; finally, polish the boots with glazing and decontaminating leather brighteners.

Snow boots: you need to prepare soft brush, clean water, pure white toothpaste or detergent, small comb, hair dryer and other tools.

The shoes and boots of the white snow boots can be washed with soft brush and a little pure white toothpaste and water. Then pour a little detergent into the wet hands and clean the artificial hair on the boot, wash and squeeze the water with clean water.

Finally, when the snow boots are naturally dried to 80% hours, the boot tube is finalized, and the artificial hair is dried by a small comb and a hair dryer.

Light and dark snow boots should be cleaned with a soft brush and a little detergent diluted. The rest steps are the same as those for white snow boots.

Suede shoes: suede, frosted skin, velvet skin and other leather fabrics are relatively special. It is suggested that professional cleaning and maintenance tools should be selected. In general, suede rubbers, suede clean water, velvet leather shoes brush, suede maintenance color supplement agent and other maintenance tools are needed.

Step one: wipe the small stains on the vamp with suede glue; the second step: if the vamp is dirty, you need to use suede clean water.

You can shake the suede clean water first, then wet the vamp fully, use the velvet leather brush to brush the rubber surface repeatedly and repeatedly, wipe the stains on both sides of the fiber, and dry the dirty foam with wet sponge.

For heavy stains and polished areas, the flushing shoes can be treated with copper wire.

The third step: use suede maintenance color supplement agent to improve the color of the vamp. First, use the complementary color agent to shake up before use. Spray the color supplement agent at the position of 15 centimeters above the vamp, then rub the rubber surface with the velvet leather shoes to make the color uniform.

Third step: plastic surgery

After the deodorization and cleaning work is completed, the winter shoes need to be reshaped. Do not belittle a few "plastic surgery".

Method 1: a shoe boot with wrinkles on the ankle can be stuffed into a group of newspapers to support the shrunken parts.

Method two: the deformation of the boot is a headache. Improper reception will aggravate the deformation of the boot.

The shoe store will keep the boots straight and straight with the boot stick. It is suggested that the newspaper can be replaced by several layers of newspaper on the empty beverage bottle.

Method three: use a large clothes hanger to hang up the boots and hang them for a day, and use the weight of the boots to restore their straight form.

In order to prevent the clip from hurting the boot, you can put a napkin on the clip and hang it again.

Fourth step: receiving

Before getting the winter shoes, clean the shoes, and apply a thin layer of raw animal oil.

It needs to be reminded that shoe polish is a drying oil, and the leather is easy to break after being coated. Therefore, it is not appropriate to use shoe polish for a long time to preserve leather shoes. Instead, it should be coated with a layer of raw animal oil. If a raw lard or raw lamb oil is applied repeatedly, the upper surface can be prevented from drying and breaking.

After completing all the above steps, you need to put the winter shoes in the ventilating place for 1~2 days, then put them in the "original" shoes box, so that the winter shoes will be as long as new.