How High Should The Hallway Shoe Cabinet Be?

The height of the hall shoe cabinet is a need to see the overall shape and decoration effect. The two is to look at the form of shoes, the three is the size of the shoes.

Specifically,

1, do flip door door vertical shoes, three door door recommendations about 1200.

Approximate size: 350X3 level + kick height + upper closing thickness.

This type is not suitable for the 4 floor, because getting shoes from the top is too high and inconvenient.

There are special hardware fittings in the tipping board market (two layers, three layers, and plastic ones).

The advantage is saving space, suitable for large number of shoes, not limited by width, the thickness can be the thinnest (two layers).

The disadvantage is that it is not suitable for high waist shoes and high heels with high heels and thick shoes (mountaineering boots, traveling shoes, etc.), and it is easy to squeeze uppers when inserting shoes.

Ordinary leather shoes and slippers are most suitable.

It's a typical shoe changing shoe cabinet rather than a storage shoe cabinet.

2, flat door shoe cabinet, height is not limited.

With expert's convenience.

The thickness requirement is large. Generally, the maximum thickness of shoes is the standard. The thickness is usually about 350~400.

The utility model has the advantages that the flat shoe does not hurt the shoes, and the inner partition board can be used as a live plate, which is convenient for storing high tube boots, and is suitable for storing shoe changing shoes with shoe boxes.

The disadvantage is that the door takes up space. If there are 1000 wide walkways, the shoe cabinet with 1000 width will only be 500 after opening the door.

It is suggested that the lower part of the shoe cabinet can not be landed, and the lower part can be suspended.

The height of the upper part is generally less than 1200 of the distance from the ground, and can be combined with the function of the hall to make a temporary surface or a decorative table.

If confined by space, such cabinets are also very thin, and shoes are placed horizontally - like the walls of shopping malls showing shoes.

The thickness can be up to 130~140 after completion.

Of course, I can't put a few pairs of shoes in this way.

There is no limit to the height of the shoe cabinet. It is convenient for the expert and the overall decoration effect is the standard.

In addition, I have seen many hall and shoe cabinet designs, but few of them have been designed to sit and change shoes.

Some shoes have a lot of buttons. They are usually high tube boots. They are not easy to put on. They are not squatting on the ground without stepping on their feet.

Why don't you think of a comfortable seat for your wife?

Ordinary Jiezhuang can not only be beautiful, should start from the actual needs, from the function, people-oriented, to make their favorite, comfortable, unique decoration effect.