Design Of Shallow Enclosure Shoes -- Characteristics

Design features of shallow enclosure shoes

The shallow surround shoe is a loose leisure footwear. The biggest feature of the structure is the narrow and long strip, not only the front end is narrow, but the side band is narrow, and the length can reach the position of the heel directly, so it is called the shallow shoe. This type of footwear was popular in 1980s, and was called a walk. Boss shoes and so on, all are by the shallow enclosure structure and the different back match, evolved the shallow enclosed shoe series. For example, the inner ear type shallow enclosure shoes, outer ear type shallow I shoes, tongue type shallow enclosure shoes, whole tongue type shallow enclosure shoes. Among them, the whole tongue type shallow enclosure is also called "Bingdu shoes", which has the longest popularity. With the transfer of F, it has evolved into the present "Xi Li Shi shoes". It is easy to see that the styles of shoes always change with the passage of time. They always absorb patterns and characteristics of the times, and then appear on the market with a new look.

1. last type characteristics
The shallow shoe is a variant of the shoe with its own special shallow surround last. Shallow enclosure, shoe last is male last, from the appearance, the line of the wall of the shoe is obvious, the shape is more upright, the height is in the range of 10 ~ 16mm, the heel height is relatively short, 15 ~ 20mm, the waist of the sole is wider. Because it is a product that has only appeared in recent years, it is not popular to find the data of shallow weir last year, but it is very popular in the market. By measuring the last body, it is known that its metatarsal circumference is thin. It is the same as the same type of tongue type last. Its tarsal circumference is more fat than the same type of prime shoe last. It is suitable for designing tongue shoes, ear shoes and open shoes with narrow shoe.

2. structural characteristics
The shallow surround shoe is a kind of men's round shoe, the enclosure is relatively narrow, and the front end still needs to be taken at the J'point; the height of the toe and toe control area is about lOmm below the O point; the height of the heel part is controlled by the height of the shoe line at 1 / 4~1 / 2 range.
Due to the narrowing of the strip, the shoe cover is widened, and a variety of decorations are often made on the shoe covers, such as false lines, wearing flowers and asymmetrical divisions.
The front face of the shoe is always shorter because the position of the fence is relatively close, so as to adjust the proportion of the shoe body. Because of the increased shoe size, it is a popular leisure footwear.
The girth part is like a ship, which carries different structures such as ear, tongue and opening. Therefore, the design model of shallow surround shoes is: ten design of shallow fence design.

3. special requirements
Because the shallow shoe still belongs to the cover shoe, it is necessary to prepare the replica board of the shoe cover, and the double line pick up method is also needed to handle the stilts.
The last line of the shallow surfacing last wall is very obvious. It has a lower position than the general cover wall. When designing the last board, we should design the control line about 3mm above the wall line of the last wall, so as to prevent the surrounding line falling down when it becomes a shoe.
In order to coordinate with the shallow section, the length of the shoe tongue is usually shorter, and it takes 1 / 2VE. The front face is the longest when designing the tongue shaped shallow shoe, and it only takes about lOmm position before the E point.