Design Of Hollow Female Shallow Mouth Sandals

The Chinese women's shallow sandals are designed to provide an air permeable structure. One form of penetration is able to maintain a complete shoe outline. It is only used to cut the upper part of the upper part. The other form of penetration only preserves the front and back parts of the shoe. There are no parts on the side or side of the waist. Two phase comparison. The female shallow shoe of the former has complete structure and strong foot holding ability. Although the structure of the latter is the skeleton of the female shallow shoe, its structure is not complete, and its ability to hold feet is reduced. It is often remedied by designing long front face, narrow door, long main heel, etc., or adding a shoelace to improve the ability of holding feet.

For the hollow female shallow sandals, the exposed bottom of the waist is also needed to cover the edges. There is also a need for cutting the stubble on the feet, so the processing marks for the bottom parts are also needed. The method of processing marks is shown in figure 4-1-4.

Design of 1. waist open sandals
As shown in figure 4-1-5, the waist of the shoe is designed to be an air permeable structure. In the rear end of the permeable structure, retaining the basic shape of the rear package and following the main heel. Similarly, the difference between the inside and outside should be made at the bottom of the mouth, so that the mouth of the city can move forward to 5 to 6mm. In the front part of the permeable part, the difference between the inside and outside arms is also maintained, and the exposure length inside and outside the outer part is equal. The design is in common with women's round shoes.

2. design of waist broken sandals
As shown in Fig. 4-1-6, a broken waist structure is designed on the outer side of the waist, and there are no components in the outer waist. Because these shoes have lower ability to hold their feet, they are often designed as fashion shoes to show women's charm, not ordinary shoes. You can also design the broken waist structure on the side of the heart. The outer arms should be made into the shape of the back package and the shape of the bottom. The length of the bottom port should not be too short.

The rest is designed with women's round shoes.

Design of 3. pairs of waist broken sandals
As shown in figure 4-1-7, a broken waist structure is designed on both sides of the waist of the shoe. In order to increase the foot holding ability of shoes, there are also designs of girth. There is a belt around the upper part of the heel, and the girdle is worn into the annulus to play the role of binding feet.

The bottom of the back of the shoe should have the difference between the inside and outside, and the bottom of the front support also has the difference between the inside and outside.
The front part of the shoe has a decorative piece which is riveted on the upper. The rest is designed with women's round shoes.