Home >

Henan Puts Forward Suggestions On Elimination Of Backward Production Capacity Such As Printing And Dyeing

2010/7/9 15:20:00 37

??? 日本語 Fran?ais English 中文

According to the notice of the State Council on Further Strengthening the work of eliminating backward production capacity, Henan recently issued the "implementation of opinions on eliminating backward production capacity" (hereinafter referred to as "opinion").

In the light of

Textile industry

The "opinions" clearly stated the objectives and tasks: before the end of 2011, the 74 type dyeing and finishing production lines, more than 15 years of pre-treatment equipment, and the batch dyeing equipment with a bath ratio greater than 1: 10 were eliminated; the backward printing machines, hot melt dyeing machines, hot air cloth stretching machines, and fixed machines were eliminated; the backward production processes and equipment with high energy consumption and high water consumption were eliminated; the R531 type acidic old viscose spinning machine was eliminated, the annual production of viscose production line below 20 thousand tons, the wet process and DMF solvent spandex production process, the DMF solvent acrylic production process, the semi-automatic winding equipment of polyester filament spindles 900 millimeters, the backward chemical fiber production capacity of the batch polymerization polyester equipment and so on.,

The "opinion" has strengthened the restraint function of safety, environmental protection, energy consumption, material consumption, quality, land and mineral development and other indicators; formulated and improved the relevant industry access conditions and the definition of backward production capacity; encouraged the development of low consumption and low pollution advanced production capacity; strengthened the management of investment project auditing, and persisted in the principle of "equal displacement" or "reduced displacement" of new capacity and elimination capacity for overcapacity industries.

Superior enterprises

Merger, acquisition and reorganization of backward production enterprises.

Supplement:

Textile machinery

Look at the printing and dyeing equipment and talk about background.

In May 28th, the Ministry of industry and information technology held a national industrial system to eliminate backward production capacity meeting. It was required that the 74 type dyeing and finishing production line and the intermittent dyeing equipment with bath ratio greater than 1:10 before the end of 2011 were required to eliminate backward printing machines and hot melt dyeing machines, and eliminate backward production processes and equipment with high energy consumption and high water consumption.

As the state has formulated more stringent energy conservation and emission reduction targets, the printing and dyeing equipment exhibited at this year's textile machinery exhibition accounts for 25%, which is undoubtedly a major attraction of this spinning machine exhibition.

Technology and equipment have been significantly improved.

In the domestic textile equipment, the dyeing and printing category is a big difference from the advanced level abroad.

But through this spinning machine exhibition, we can see that after nearly several years of development, the printing and dyeing industry has been significantly improved, both in terms of printing and dyeing technology and printing and dyeing equipment, and more and more advanced domestic dyeing and finishing equipment has emerged. The gap between the printing and dyeing industry and the advanced level of the world is shrinking.

First, printing and dyeing production is changing the traditional extensive processing mode, and gradually integrated with information technology, biotechnology, automation technology and other new technologies.

Hangzhou open source computer technology Co., Ltd. is a "IT service professional provider in printing and dyeing industry". Zhang Zhaofeng, its marketing manager, believes that with the increase of production costs, automation and informatization will be the development trend of dyeing and printing equipment.

The "Alick automatic computerized mixing system" is based on the actual process of printing and dyeing plant. The database management technology is applied to the printing, mixing and dyeing, so as to realize high-speed intelligent sizing and residual pulp reuse, and significantly improve the accuracy and efficiency of printing and mixing.

The "dye liquor titrating machine" introduced by Hongyi science and technology has a high accuracy in measuring the new type of pipeline dripping liquid, and its minimum dose can reach third after the decimal point.

Second, the development and application of new printing and dyeing technologies such as high efficiency, short flow and airflow dyeing not only increase the added value of printing and dyeing products, but also save resources and reduce pollution.

Xi'an de Gao mechanical and electrical enterprise group is a high-tech enterprise specializing in the development of textile printing complete sets of equipment and printing and dyeing automation project. It is one of the national standard making units of rotary screen printing machine.

The "FSM series new full servo flat screen printing machine" has been praised by many professional audiences.

Tai'an Kangping Na Machinery Co., Ltd. exhibiting "multi-functional velvet soft finishing machine" and "microwave dryer", compared with the traditional process washing time shortened by 70, the tonnage water consumption reduced by 50, and the gas consumption reduced by 30. It has obvious environmental protection and energy saving effect, and it can save about 45000 yuan a year.

Third, printing and dyeing industry has gradually increased the equipment of low bath ratio and low energy consumption.

The automatic control level of the equipment is improved and the precision is improved. It not only improves the quality of textiles, but also improves the utilization rate of resources and reduces the discharge of pollutants.

Changzhou Hongda Technology Group's "printing and dyeing energy management system" launched at the exhibition is a bright spot and has been recognized by many experts and purchasers.

Wuxi Dong Neng Energy Technology Co., Ltd. is also a national high-tech enterprise developing and manufacturing energy saving and environmental protection equipment. This enterprise has rich experience and technical strength in the heat recovery of stereotype machine, the recovery of boiler waste heat, the recovery of waste heat from hot waste water, and the purification of exhaust gas from stereotyping machine.

In addition, printing equipment is a better printing and dyeing machinery in China. Digital printing, cold pfer printing, inkjet printing and electrostatic printing have also made rapid progress. The trend of personalized, functional and fashionable printing textile has also promoted the trend of dyeing and finishing equipment to small batch, multi varieties and one machine with multiple uses.

The industry is still facing many problems.

Today's performance is not a day's work.

The entry conditions for printing and dyeing industry (Revised Edition 2010) made provisions for new or expanded printing and dyeing projects, including high priority, energy saving and low consumption continuous processing equipment and technology.

In the interview, even some well-known international exhibitors sigh that in recent years China has been very strict in energy conservation and emission reduction. They used to aim at meeting the ISO standard, but now they are discussing more about how to achieve GB (China's national standard), because the GB standard is also very high.

Although China's printing and dyeing industry has made some progress in energy conservation and emission reduction in recent years, "energy saving, emission reduction, water saving and consumption reduction" has become the mainstream consensus in the printing and dyeing industry. The problem is that most printing and dyeing enterprises are still insufficient in energy conservation and emission reduction, and the adoption rate of advanced technology and equipment is still low.

As the country has put forward more stringent standards on energy saving and emission reduction, the target of energy saving and emission reduction in China's printing and dyeing industry is still a long way to go.

Meanwhile, more and more attention has been paid to the protection of intellectual property rights in textile machinery industry.

Changzhou Hongda chairman Gu Ren said: "now we have many products are also infringed, project plagiarism among enterprises is very bad.

Only by protecting patents can we have the potential for development in the future.

In addition, there are still some problems of long service life and low technical level of some dyeing and finishing equipment. There is still a certain gap between the automation level of domestic equipment and the advanced international level, and the overall equipment level of China's printing and dyeing industry still has much room for improvement.