How To Deal With Moldy Leather Shoes?

　　 leather shoes The maintenance starts with new shoes. Most leather shoes are certain. Waterproof work Yes, but if you wear it on rainy days, please first coat it with shoe polish and spray it with waterproof fog. Shoeshine is not coated with the more, the excessive shoe polish not only can not absorb for the leather, but also backfire, and wet the leather shoes again. If you bend over and wear shoes, please don't "slack off", untie your shoelaces, put up a heel, and pay attention to the use of shoehorn. The maintenance of leather shoes is one of the most basic courtesies in the social interaction. To buy satisfactory shoes needs to be improved.

Maintain and extend its life span. When you wear shoes, you should undo the shoelaces and use the shoehorn. The damage of many shoes starts from the heel. Therefore, try to use shoes and boots as much as possible. Do not push hard when you wear shoes. Shoes with shoelaces should be developed after loosening your shoelaces. When you put your shoes, you should use shoe last to prevent shoes from deforming. Foot shape, walking method, body temperature and humidity, rain and other factors will cause shoes to be out of shape, especially when sweating or being caught in the rain. Because the temperature and moisture will relax the leather, it must be set up when the body temperature is still in the shoes.

Leather shoes should be done immediately after they are bought maintain 。 Because the new shoes bought are not coated with shoe polish. To protect the new shoes, they must first wear shoe polish, polish them and spray waterproof mist before wearing them. In addition, no more shoes should be worn every day. Wearing different shoes is one of the ways to prevent shoes from getting old. The basic products for shoes are shoe brush, cleaning oil, shoe polish, cloth, waterproof spray and so on. Shoeshine is best to use horse hair, and should have at least two shoe brushes, one large brush shoes as a whole, another small brush detail, shoe polish with shoes color. Leather shoes should be properly disposed of when they are wet, so that shoes can not be deformed.

Leather shoes maintenance manual

The more attention is paid to the people who dress up, the more diligent they are to maintain the shoes. And wearing shoes that are bright and beautiful, is also one of the most basic courtesies. Once you try to learn how to maintain your shoes, you can see that you don't need to spend too much time and enjoy it. When you wear shoes, you should untie your shoelaces and use shoehorn: be careful on weekdays. This is the first step in shoe maintenance. Shoes wear more damage from the heel. Therefore, you can use shoes and boots to wear shoes. At home, you can prepare long handles and are usually ready to carry them. In addition, do not wear hard shoes when wearing shoes. Shoes with shoelaces should be developed after loosening the shoelaces. Use shoe last to prevent shoe deformation: prevent shoes deformation, stuffed into shoe last best. Foot shape, walking method, temperature and humidity, rain and other factors will cause shoes to be out of shape, especially when sweating or getting wet. Because of the temperature and humidity. Leatherwear Relaxation must be set when the body temperature remains inside the shoe.

Immediately after the purchase maintenance: new shoes are not coated with shoe polish. To protect new shoes, wear shoes polish, polish and spray waterproof before wearing. The above two steps to do or not do is very important to the aging of shoes. Also, no more shoes should be worn every day. Different shoes exchange is one of the ways to prevent shoes from getting old. Essential footwear basic maintenance products: basic footwear, shoe brush, cleaning oil, shoe polish, cloth, waterproof spray, etc. It is better to use the shoe brush of horse hair and have at least two large brushes and small brushes. Shoe polish should be matched with shoes. Tawny shoes are made of Tan shoe polish and black shoe polish. The shoe polish may be discolourable when it is inconsistent with the nature of the cleaning oil, so the first time you wipe your new shoes, you should rub it up in a place that is never conspicuous.

* proper maintenance: Recently, the use of "one touch is bright" - simple and convenient shoe polish more and more people. But we need to play it carefully without any carelessness to prolong the life of shoes.

First, use the big shoe brush to brush the whole shoes lightly to see if there is any dirt on the protruding part of the shoe.

(2) the concave and convex parts of shoes or joints, and brush off dirt and dust with small shoes.

Loosening the shoelace and cleaning the dirty dog from the outside side with small shoes?

(4) squeeze a little clean oil onto the cloth and coat the whole shoes. At this point, the most important thing is to thoroughly clean the old shoe polish remaining on the shoes.

(5) take another piece of cloth (do not mix with the cloth that uses clean oil), dip a little shoe polish, and coat the whole shoe. Shoe polish takes about the size of the little finger.

After polishing the whole shoes, polish the whole shoes with clean soft cloth. Details should not be careless.

Finally, spray waterproof fog. The waterproof fog not only prevents the shoes from attacking the water, but also has the effect of not being contaminated with dirt.

After the waterproof mist is dried, put the shoe last into the shoes.

* after wetting the maintenance method: when the shoes are wet by rain, they will be disposed of properly, so that the shoes will not be deformed.

First, use the absorbent fabric to suck the moisture on the surface of the shoes. Too hard to wipe, the dirt attached to it will scratch the surface of the shoes, you should pay special attention to it.

Second, put the newspaper or toilet paper into your shoes, and replace it more often, so as to completely suck up the moisture. (3) if you are concerned, you should put the shoe last in order to prevent deformation. Then put it in the ventilated place and dry.

4. After complete drying, it will be maintained according to the general maintenance method.

Household Encyclopedia

Leather shoes are mainly used for leather shoes, leather and leather are the most popular materials. However, due to the different processing technology and divided into several different characteristics of leather, maintenance methods are also different from us everyday. Here are some common leather materials and maintenance methods for you.

Description of purchase and maintenance of leather shoes (1)

Buffalo and black faced cowhide

Calf skin and black faced cowhide are produced in Italy. The coating on the surface of the cowhide is made of resin chemical material, and pearlescent powder or metal powder is added into the resin, so that the surface of the skin is glittering. The characteristics of black leather are the same as that of buffalo hide, but the surface coating is different. The combination of calf skin and black face skin reflects the feeling of sun and moon, and makes this kind of leather shoes popular among consumers.

Maintenance: it is best not to wear it below 5 degrees centigrade, wear the best at 10 degrees above the temperature, the coating is not easy to crack; surface maintenance is best to use colourless high-grade shoe milk, can not be used as brightening agent maintenance, otherwise it will cause false coating to fall off.

Instructions for purchase and maintenance of leather shoes (two)

Flat lacquer and wrinkled lacquer

Flat lacquer and crumb leather are produced in Italy, and are popular in countries such as Europe and America. Wrinkle lacquer is widely used at present. Its advantages are: good handle and soft skin. In the tanning process, the skin is soft and then varnished. Its brightness is no less than that of the mirror. Wrinkles, such as broken toughened glass patterns, soft leather without losing the characteristics of cowhide, make the products comfortable and have unique taste.

Maintenance: wrinkle lacquer is made of neutral resin paint, so it is not easy to fade. The surface is not easy to absorb water. It is easy to maintain and surface dust.

It can be cleaned with clean wet cloth (not dripping well), gently cleaned and cleaned with no soft soft cloth. It can also be maintained with leather cleaning agent or cleaning cream, but it can not be maintained with brightening agent or shoe milk. Brightening agent will cause false coating to fall off and shoes will make the upper shoe black. It is best to wear wrinkled lacquer at above 10 C.

Instructions for purchase and maintenance of leather shoes (three)

Goat skin

The sheepskin is also called two color leather, which is produced in Spain. Two color effect refers to its skin pattern, such as marble, ripples like water, especially the products made to release the beauty of nature. No matter which angle it looks, it makes people memorable.

Maintenance: the method is relatively easy, with better shoes, shoes and cream, color selection is colorless.