How To Distinguish Synthetic Leather From Genuine Or Fake Leather?

1. if it is allowed to burn, the most direct way is to burn it.

2. press the leather with your hands, the natural leather has natural wrinkles, and the artificial leather wrinkles are not natural.

3. comparing different leather pieces, a leather product, such as leather or leather shoes, is rarely made of whole leather, so it can see different small pieces of leather. The texture of each piece of leather is very small, and each piece of artificial leather has the same texture.

4. look at the reverse side of leather, artificial leather generally has chemical fiber fabric or texture, leather only pores.

5. look at the luster, the gloss of the leather is soft, and the gloss of artificial leather is brighter.

6. look at the price. The price of genuine leather is very different from that of artificial leather. If the price of genuine leather products is very low, it must be very careful and careful.

Water is applied to the surface, the skin absorbs water, and it will dry after a while. There is also a sense of touch, leather with nails and other hard objects lightly scratches, dents will soon be gone, leather is very slow, may not disappear.

Knowledge of artificial leather

1. No cloth based synthetic leather.

This leather has a thickness of 1.7MM and is suitable for making shoes, bags and so on. Fabric It is generally of a uniform or deep color with a foam appearance. Therefore, the full elasticity effect of leather is good, the surface is flat, and there are all kinds of imitation patterns on it. The leather is evenly sprayed and slightly sprayed with the inner leather of the leather, and then ironed with a similar leather. Therefore, it looks like two layers of leather or work shaving leather from the surface and the fullness of the leather.

Two. Microfiber synthetic leather.

The thickness of the leather is about 1500um. coating It is made up of two parts, the non woven layer, and is actually a synthetic leather with no double-layer structure. The above coating can be of various colors, with a thickness of about 200um, with a small number of holes on the surface. The top is a flat top. When the surface is pressed, 1300um is the main body of the leather. The section is honeycomb, and the composition is basically the same as that without the cloth based synthetic leather. However, it is a structural way of imitation of natural leather. It is made of a three-dimensional structure of a three-dimensional skeleton with a three-dimensional structure, and then filled with the microporous structure of the ammonia.

Microfiber synthetic leather is the upgrading product of no cloth based synthetic leather.

Three. Synthetic leather based on woven fabric.

Its appearance is thinner and its thickness is 680um. Its color is shallower. It is generally pale yellow, beige and yellowish brown. The leather is soft, the surface migration is large, and the wrinkles are obvious when folded. On the cross section, the hair and the dermal follicle like characteristics of the fiber can be seen in the naked eye, so the appearance is very similar to pig leather or leather shoes.