Serge, Rolle And Merten For Fabric Knowledge Introduction

　 　 Serge Weaving, classification and use

Serge is made of 2/2 twill weave fabric. It is a fabric made from a grin style. Commonly used raw materials for wow are pure cotton, cotton / viscose, viscose and so on. Warp and weft yarns are commonly used in 18-42tex (32-14 British) single yarn or 14tex * 2-18tex * 2 (42/2-32/2 British) strands. The meridional tightness is 50%-70%, the zonal tightness is 45%-55%, and the latitude to latitude compactness ratio is about 6:5.

The serge is soft and has a thick texture. The reverse twill is opposite direction, the twill angle is about 45 degrees, and the weave is broad and not prominent. According to the lines used, they are divided into gauze, half line weir and all line weir.

Grey cloth can be used for men and women after dyeing. clothing , Children's hat fabric 。 It can be used as clothing for women and children after printing.

　　 What is Rolle's fabric and uses?

Rolle's surface fabric is tight, lined evenly, and the surface of cloth is smooth. The raw material is 100% spun elastic polyester fiber. Fabric interior structure is: network 1/1 plain. Door width: 150cm. Color fastness: Grade 4 or above. The main performance is tight, uniform texture, soft and comfortable feel, smooth and smooth cloth, not easy to pick up silk, not easy to wrinkle, and can slightly replace the breathability of cotton fabrics, and contain TC or hazy ingredients. clothes Good wash, no wool ball.

Good quality plus cheaper prices, so Rolle used a lot in the uniform industry, usually used to produce hotel clothing, cleaning clothes, waiters and other types of clothing.

Introduction, categories and uses of Merten

Merten is a high quality person. Woolen fabric It was first named in Merten Melton Mowbray. Merten's surface is clean and smooth, his bones are solid and elastic. It has a fine fuzz covering the fabric shading, good abrasion resistance, no pilling, good thermal insulation and water resistance. It is one of the top grade products in woollen fabrics.

Merten usually uses fine Branch hair to mix part of short hair into 62.5-83.3tex wool yarn as raw material, and uses two or more two or two top twill weaves to finish the finishing process by finishing or finishing two times.

The raw material is full wool (sometimes added to the nylon strength staple fiber which is not more than 10%, which is added to the fabric strength and abrasion resistance. It is also called woolen fabric). Wool or viscose wool is blended. The raw material ratio of pure wool products is usually 60-64 or more than 80% of the first grade wool and 20% of combed short hair. The blended products are blended with 60-64 or one quality 50%-70%, combed short wool 20%, viscose fiber and synthetic fiber 20%-30%. The linear density of spinning yarns is 62.5-100tex (10-16 common branches).

According to the quality of finished products, it can be divided into two types: 205-342g/m2 and 343-518g/m2. At present, the mass production of Malton products is mostly 450-490g/m2.

According to the texture of weave weave, they are divided into three types: plain, Meyer, tweetle, and change organization. At present, most of the production is the twill weave organization.

Merten is mainly dyed with plain dyes, with green, black, black, red and green solutions. Jacket Trousers, long overcoats and shoes Cap fabric.