What Are The Requirements For Fire Protection In Leather Products Factories?

The requirements for fire safety of leather products factories are as follows:

(1) mixing mortar should be far away from the main workshop. The mixing room should be a one or two class fire resistant building. It also meets the requirements of explosion proof pressure relief. There should be enough fire protection distance between the surrounding buildings and the locations of open fires or sparks.

(2) production sites should be good. aeration 。 In order to discharge flammable liquid vapor in time.

(3) the flammable liquids such as toluene, gasoline and other inflammable liquids used in the mucilage workshop should be on duty and on duty. The finished product should be sealed and stored in a special library. It should not be stored with other articles.

(4) lightning protection facilities should be provided. Indoor electrical appliances are not equipped and wire laying should meet the requirements of explosion-proof.

(5) strict fire control and safe operation. system 。 Fireworks are prohibited in the workshop to prevent collisions or friction with the ground. Check equipment regularly and eliminate hidden dangers in time. Operators should not wear synthetic fabrics that are easy to accumulate static electricity. No independent personnel are allowed to enter the production and storage areas of mucilage.

(6) the order should be concentrated, preferably in separate rooms, so as to facilitate local fire prevention and reduce the impact of accidents. There should be partial exhaust facilities on the surface of the rubber brush, and timely exclude the flammable gas evaporated from the mortar.

(7) "Li Ke Na" (toluene solution of three phenyl methane three isocyanuric acid) is lively and easy to react with various hydrogen containing substances. Therefore, it should not be related to alcohols, acids, amines, water and so on. Contact It should be kept in a closed storage. Firework should be strictly prohibited at the work site.

(8) the factory building should have more than two safety exits, so as to avoid the formation of the bag plant and the bag walk. Evacuation routes should go straight to outdoor safe areas and should not pass through inflammable hazardous production or storage sites to ensure safe evacuation when accidents occur.