Women Shoes Board Production Process Detailed Explanation

Plate making, also called flip plate, is shoe design.

In the process of designing shoes, sometimes designers are inspired by their own inspiration, sometimes based on existing shoes or pictures.

The object of the shoe must be determined according to the last shape, and the length of the shoe will be adjusted according to the season.

Depending on the fabric, the degree of shrinkage is different, but the shrinkage of the fabric must be required to determine the size of the sample.

The imported leather has strong tensile strength, the shape of the package needs to be adapted to low shrinkage, the shrinkage of the synthetic leather is not the same, the size of the template is also targeted, the size of the sample is to be made as a female parent, and the size of the amplification is determined according to the condition of the shoe joint.

In general, we divide a set of templates into material, bag and cloth.

Although it allows two codes to use the same template, normally, it requires a code sample and a template. The sample is a template corresponding to a code, and the cloth pattern can be divided into large, medium and small models, but most of the time codes and templates are one-to-one correspondence.

In addition, the size of the model is marked on the template, which is a good distinction for later use.

As manufacturers, according to our own needs, different models will have different numbers. This number is always consistent with the product number.

Since the beginning of the game, the design, drawing, enlargement and tailoring of the designers are basically manual operations.

Although computers are introduced now, all manual operations will still be used when designing mother samples, but the rest can be made by computer, which can save labor and be more accurate.

The texture of the sample starts with red cardboard. Later, because the cardboard is easy to be affected by the wet water in the process of use, the accuracy of the sample is affected. Now the plastic board is used, and the durability of the sample has been greatly improved.

Of course, besides the shoe samples, the die for blanching is also required.

After the completion of the game, the design of shoes is completely over. The formal production of shoes will be based on the making of master plates.