Domestic Inspection Standards For Finished Shoes

Domestic inspection standards for finished shoes

One size: 1, the left and right foot sizes are the same; 2, the shoes are of the same size (length), the same size as the sides and the middle plates.

Two glue: 1, the finished shoes are not longer than 2mm, far more than 1.5mm, only glue open area; 2, the big bottom and the side surface are firmly bonded, no cracks, no gaps; 3, pull test 2.5 kg / cm per square meter.

Three breakage: 1, finished shoe toe, middle side, front eye protection surface is broken; 2, the middle side, etc., not the display surface, can not have an area of more than 2 square millimeter damage; 3, the back neckline, tongue and tongue can not be damaged; 4, the car can not break the car, the shoe tongue can not be damaged; 5, the big bottom is damaged and missing, the length is over 1mm, the width 1.5mm is not qualified; 6, the shoelace is broken.

Four firm: 1, the tongue must be firmly fixed, not to fall off; 2, the ribbon must be firmly fixed, no drop off; 3, drop, plastic, letters can not be dropped; 4, hot and firm must not be dropped; 5, pfer or cloth size, no drop 6, parts of the car line must not fall off; 7, metal buckle deformation, loosening, no bottom buckle, paint failed; 8, dropping plastic fastener, easy to pull off, not qualified; 9, big bottom label connection is not qualified; 10, the soles combination is not firmly unqualified.

Five color difference: 1, only one side of the symmetrical parts, the entire pair of shoes around the symmetrical parts of the feet, can not have chromatic aberration; 2, the big bottom of the left and right feet can not have chromatic aberration, the big bottom wall can not have chromatic aberration, the bottom flower can accept, slight chromatic aberration; 3, accessories, such as trademarks, ribbon, plastic, rust, high frequency, printing does not allow serious color difference.

Six car line: 1, any parts, the car is broken, no bottom line is unqualified; 2, the needle car is not qualified; 3, double needle wiring, heavy needle, string, row spacing seriously uneven, unsmooth and unqualified; 4, the force parts, the main components bottom line, generally loose, the surface line is not qualified; 5, the margin, needle distance is seriously uneven, the line is not smooth, seriously affects the appearance, is not qualified; 6, the line is not right and left color is wrong, single needle, double needle line is not qualified.

Seven high and low: 1, the toe height of not more than 1.5mm, heel height not more than 2mm, medium waist exceeds 3mm unqualified; 2, shoes on the plane is big and low, uneven shoes, left or right, the swing is more than 2mm unqualified.

Eight long and short: 1, the length of the front group exceeds 2mm, and 2, the length of the tongue is exposed to more than 3mm, and it is unqualified. 3, the length of the sole is over 3mm, and 4, the length of the shoelace is over 2cm.

Nine deviation is positive: 1, toe head skew exceeds 1.5mm unqualified; 2, followed by skew ultra 2mm unqualified; 3, shoe magic buckle, skew 3mm is not qualified.

Ten size: 1, the toe of the toe tip (inside head) is longer than 2mm, and the width is over 2mm; 2, the size of the corresponding parts of the left and right feet is unqualified; 3, after the sponge is wrapped, the neckline is exposed, and the size is unqualified.

Eleven wrinkle: 1, the inner part of the shoe is wrinkled and affects the appearance; it is not qualified; 2, the big and low bottom, the side wall wrinkle and the edge influence the appearance, and the unqualified; 3, the upper and the bottom are followed by the hair angle, the wrinkle is not qualified; 4, the inside wrinkles, is not qualified.

Twelve pinholes: 1, outside, inside and outside the side of the eye, not pinholes; 2, posterior and medial, not allowed to have a pinhole, not more than two holes per place.

Thirteen materials: 1, the same pair of shoes, the corresponding parts of the material is different, not qualified; 2, the corresponding parts of the material color is not qualified; 3, the material color, thickness, pattern, villi, decoration is different, not qualified; 4, the material is different, not qualified; 5, the material crack surface, crack, coating off, decolorization, discoloration, not qualified.