What Are The Manufacturing Techniques Of Cloth Shoes?

The first procedure is cutting the bottom.

Handmade cloth shoes are made of traditional folk craft and cut out of shoes with paper.

The second way is to fill up the thousand floors.

When filling with 100% pure cotton, it must be neat and clean. The number of layers should not be less than 25 layers. There should not be any wrinkles between the 25 layers of cloth.

The third way: nano shoe sole is also one of the most important links in production.

Keep the soles clean during the process. When the line must be crossed, the edges should not be out of shape. The stitches should be arranged in a neat way. There should be no distortion. When the vertical and horizontal spacing is uniform, the force should be appropriate. The surface of the sole should not be uneven, otherwise it will be considered unqualified.

The fourth way: cut the bottom.

The first is to flatten the good sole with hammer, so as to soften the sole of the shoe, and wear it more comfortably and comfortably with shoes.

The two is trimming the edges of the sole of the shoe, and using the special tools to remove the edges.

The three is to use high-quality cotton on the sole.

The four is sewing lining cloth.

The fifth way: trim the upper.

Use high quality shoe lining as lining.

Fabrics are cotton, satin and silk, embroidery and so on.

First use the lining before cutting into a sample, paving the fabric and lining with the slurry lake, and then use the special lining cloth to adhere the reverse side. After drying, the next step can be made.

The sixth way: sewing upper.

After the air dried, the excess parts of the sample are cut off and then advanced.

Stitching is very important. Needle spacing is international standard. Straight needle should be straight.

When turning, bend the needle and do not twist.

The roll cloth and the welt must be tight and no loosening and wrinkling can be seen when sewing.

At the same time, keep the welt clean.

The seventh way: shoe.

The traditional manual sewing thread is used.

When you help, you should grasp the matching yardstick of the upper and sole. The stitching distance should not be too large. The stitches should not be skewed. The upper and the right sides of the upper shoe should be aligned and must not exceed the edge of the shoe.

The eighth way: shoe last.

Good shoes must be reshaped by shoe last.

When the last shoe is used, the size of the shoe last must be the same as the size of the shoe, so that the shoes that come out last will be beautiful and fit.

The ninth way: trimming and wiping.

Trimming is to cut off excess thread, remove the foreign body on the vamp, and then use the special material to smooth the sole edge.

The tenth way: inspection.

First of all, check the appearance of shoes, such as shoe sole making, shoe upper sewing, shoe last, etc., and find that the defective ones are regarded as unqualified.

We need to return it.