People'S Republic Of China New National Standard For Travel Shoes

1. Theme content and scope of use
This standard specifies the classification of tourist shoes.
This standard applies to general wear shoes, snow shoes, etc. (collectively referred to as tourism shoes). Technical requirements, test methods, inspection rules, marking, packaging, transportation and storage. Sports shoes, practice shoes, training shoes, fitness shoes, walking shoes, jogging shoes, leisure 2, reference standards
Determination of bonding strength of GB532 vulcanized rubber to fabric
GB3293 China shoes and shoe series
Test method for peel strength of GB3903 leather shoes
G day 3904 footwear folding test method
G day 3905 footwear wear test method
Inspection method for QB/T 1812 leather shoes
3. Product classification
According to shoe upper material, it is divided into:
Natural leather shoes;
Synthetic (synthetic) leather shoes:
Leather (natural leather or synthetic leather) and non leather material mixed surface shoes. 4, technical requirements
4.1 shoe number is executed according to GB3293.
4.2 the recommended values for the thickness of the original parts of the main components are shown in Table 1.

4.3 the appearance requirements of finished shoes I are shown in table 2., among which 556 are the main items 1., 2. 3.., and the rest are minor items.

4.4 the physical and mechanical properties of the outsole must conform to table 3.

4.5 the export products are executed according to the contract.
5. Test method
5.1 the visual inspection is carried out according to QB/T 1812.
5.2 peel strength test is carried out according to GB 3903, and the width of the knife edge is 10mm. General measurement of heel position. If the heel of the sole is rolled up, the first and fifth metatarsophalangeal joints should be measured. The peel strength of the bottom wall is measured before the tip (including suture travel shoes).
5.3 the folding resistance test is carried out according to GB 3904, and the cutting 5mm is flexed 40 thousand times.
5.4 wear resistance test is carried out according to GB 3905.
5.5 bonding strength test is carried out according to GB 532.
6. inspection rules
6.1 the appearance quality is double checked according to the requirement of Table 2. The main items are all qualified, the quality of appearance is qualified, and one or more of the main items are unqualified, and the products are not qualified.
6.2 physical and mechanical properties are randomly sampled 3 pairs per month and tested according to the contents of Table 3. Each item meets the requirements and the physical and mechanical properties are qualified. If there is one or more nonconformities, it is necessary to double the sample and reinspect the items that are not up to the required level. If one or more of the reinspection fails to meet the requirements, the batch is not qualified.
7, marking, packaging, transportation, storage
7.1 mark
7.1.1 each pair of shoes should be marked as follows:
A, manufacturer's name or trade mark;
B, shoe number;
C, inspection chapter. ,
7.1.2 is clearly marked in the package and should indicate the following:
A, manufacturer name, factory site, trademark and Lang Zheng code;
: B, product name (must indicate that the upper material is: natural leather, synthetic leather, artificial leather, two layers of leather or leather and Non Leather mixed shoes), goods and shoes.
A. shoes color matching:
B, this standard is partial.
7.1.3 the outer package should be marked as follows:
A, manufacturer's name and trade mark;
B, product name, product number, shoe number;
The color and quantity of C. shoes;
D. box number, Mao Meng, net weight, volume, boxing date and so on;
E. storage and transportation requirements, signs, etc.
The name and site of the 7.1.4 factory must have Chinese characters.
7.1.5 a factory name or site or trade mark is processed with "three no" products.
7.2 packaging
It must be packed inside and outside. Plastic bags, moistureproof paper, moth proofing agent and preservative can be added when necessary.
7.3 transport and storage
7.3.1 transportation and storage shall not be stressed, dampened, rained or exposed. It should not be placed with corrosive substances such as oil, acid and alkali.
7.3.2 keep the ventilation dry in the warehouse, and the product is above O.2m of the floor and wall. Prevent moisture and moldy products.
7.4 the relevant requirements for marking, packaging, transportation and storage shall be agreed upon by the buyers and sellers, and the export products shall be executed according to the contract.
Add-on:
This standard has been put forward by China Light Industry Association. This standard has a national shoe standardization center. This standard is drafted by Tianjin sports shoes factory, light industry all shoe industry scientific research institute, Shandong Muping leather shoes factory, Shanxi Datong leather shoes factory, Yantai first leather product factory and Shanghai sports shoes General Factory. The main drafters of this standard are Wang Yuwen, Zhou Jing, Yu Yanying, Sun Zhaoqi, Wang Zhongliang, Lian Peizhong and Kim Xiao Yu. Since the implementation of this standard, the professional standard ZB Y78 005-90< footwear issued by the Ministry of light industry has been cancelled.