Design Of Slit Ridge Shoes -- Design Features

The slit shoe is a kind of variant of the cover shoe, which means a shoe that is erect between the fence strip and the shoe cover.

From the structural point of view, the key to the design of slit and ridge shoes is still the dividing line between the gird and the shoe cover, with the dividing line and the amount of processing needed to make the shoes. From the technological point of view, due to the different ways of sewing the ridge, there will be many kinds of changes, such as squeezing the ridge, closing the ridge, the two hinges, the three hinges, the Borg and so on. From the point of view of the processing operation, we can use the method of manual hole sewing after drilling, and we can also use the method of mechanical direct slit. Now, there is a special Mark machine (sewing machine) for processing. From the perspective of appearance, the general seating shoes are flat after stitching. Because the shoe ridge is a three-dimensional line, it has strong visual impact and is suitable for the design of heavy, leisure and avant-garde footwear. See color K series.

The color picture K-7 is a suture and ridge shoe with slit pairs. The stitching of the front and the shoe cover boundaries is used for stitching. Through the change of seam and ridge, a dull shoe looks very vigorous.

The color picture K-8 is a suture and ridge shoe with two seams, and the shoe cover and the two edges of the fence strip are sutured. Through the change of seam and ridge, the leisure flavor of shoes is increased.
 
The color picture K-9 is a suture and ridge shoe with three seams. The edge of the shoe covers the edge of the fence, with three layers of material and stitching together. Through the change of the seam, the shoes are very plump. Look at it carefully and think about it: how does the wrapping material on the upper part of the shoe appear?

The color picture K-10 is a bag of ridge shoes, which is stitched by another ridge covering the shoe. The contrast and change of the color of the Bao ridge bar make the shoes look very rough.

    Characteristics of sewing ridge shoes
1. last type characteristics
The slit shoe is a change of the cover shoe. The shoe last is the same as the shoe around the shoe. The plain shoe and the tongue type can be used to design the shoes. If the last shape of the last wall line is obvious, the shoe ridges will become more prominent.

2. structural characteristics
The structure of the slit shoe is similar to that of the shoe, but the process details are different.

For the formation of the shoe ridge, there will be changes in the ridge, the right bank, the two ridge, the three ridge, and the Bao ridge.

The traditional way of sewing is to sew by hand, perforate at the place of suture, then stitch thread. According to the difference between the thickness of wax line or nylon line, the aperture is 1 to 1. 5mm, and 5 stitching needle is used to carry out the seam ridge. In the structural design, we must determine the location and number of punching L, and set aside the amount of processing.

Machine shoe ridge can be used by ordinary sewing machines, but subject to certain restrictions, the equipment Mark machine is commonly used at present. The full name of the Mark machine is called the "Mark Gang face sewing machine". The use of Mark machine not only improves the quality of stitching, speeds up stitching, but also provides a variety of stitching methods, which are very popular with enterprises.

3. special requirements
The design of the shoes should be carried out on the basis of the design of the shoe covers, mainly for the design of shoe ridges.
The seam ridge shoe is a technological change of the shoe cover. The following types of main ridge types are analyzed.