How To Solve The Problem Of Unequal Sleeves At The Bottom Seam Of Sleeves?

Sleeve lifting is a problem in the arrangement of sleeves. Generally, the sleeves are deep in the sleeves and 1 centimeters deep in sleeve sleeves.

Because sleeves and sleeve bottom arc are not seams, and sleeve bottom seams should fold back and down multiple times.

So when the sleeves are cut like the sleeves, they will be lifted.

If you wear the clothes on the shoulders, the sleeves and fabrics should be made worse, because the shoulder pads are 0.8 to 1 centimeters thick, so the sleeves of the clothes should be 0.5 to 0.7 centimeters deep.

The side of the cuff is just the opposite, because the cuff is like a cylinder. According to the principle that the outer arc is longer than the inner arc, the width of the cuff width of the sleeve material does not need to release the sitting capacity. When sewing, it can also be properly pulled out for 0.3 centimeters.