Brief Introduction Of Children'S Clothing Safety Standards

With the improvement of the living conditions of the national economy, the concept of children's clothing consumers has changed a lot, and consumers' demands for the safety of children's clothing are getting higher and higher.

The safety of consumer goods, especially the safety of children's clothing, is becoming the focus of social attention.

For example, a child's shirt hat and neck strap are easily caught and dangerous. When pulling up or down, the drawstring of the waist or lower part of children's coat is easy to hook and cause towing accidents.

Potential mechanical safety hazards include slipping, slipping, falling, choking, vomiting, suffocating death, strangulation, entangling, lacerations, and blood circulation obstruction, all of which pose a danger to children and threaten the precious life.

For children's physical and mental health, comprehensive prevention should be strengthened.

In recent years, our children's safety clothing standard is in the original.

GB/T 22705-2008 "safety requirements for ropes and belts for children's wear", GB/T 22702-2008 "Safety Specification for children's tops and belts" and GB/T 22704-2008 "implementation specifications for children's clothing design and production to improve mechanical safety". Three national standards constitute a series of standards for children's clothing safety. Detailed and explicit regulations are given for the design, materials, components, production and inspection of infant and children's clothing, and provide technical support for consumer safety of infants and children's clothing.

Because of the frequent recall of the safety problems of children's clothing in foreign countries, the national garment Standardization Technical Committee also hopes to pform GB/T 22705-2008 "safety requirements for children's wear ropes and belts" and GB/T 22702-2008 "Safety Specification for children's tops" into national strong standards, so as to arouse the attention of Chinese enterprises.

(1) basic

The mandatory standard GB 18401-2003 "national textile product basic safety technical specification" put forward the most basic technical requirements for infant textile products, so that infants and young children's textile products in the production, circulation and consumption process can guarantee infants' health and personal safety.

The standard stipulates that infant clothing belongs to category a infant products, and the basic safety technical requirements are as follows.

The standard also stipulates that infant products must be marked with "baby products" on the instructions.

Taking into consideration the urgent need of integrating China's clothing technology standards with international standards and resisting trade barriers such as foreign developed countries, the national garment Standardization Technical Committee has gradually shifted the focus of standardization work to environmental protection, safety and hygiene.

In recent years, we have collected and studied the technical regulations and standards of ecological textiles in developed countries. Based on the EU's 0KO Tex Standard 100, we have selected some environmental protection, safety and health technical requirements in the clothing standard according to our national conditions.

If we ask for the technical requirements of increasing formaldehyde content and pH value in infant clothing and clothing products, we will promote the attention and understanding of Chinese clothing enterprises on environmental protection, safety and hygiene, and promote the continuous improvement of enterprise management and production technology.

consumer goods

The main contents of the safety of the belt and ropes are as follows: GB/T 22704-2008 safety requirements for the belt and ropes in the code for design and production of children's clothing for improving mechanical safety are in accordance with GB/T 22702-2008 and GB/T 22705-2008.

In the process of making three children's clothing safety standards, when selecting various technical contents, we actively adopt advanced foreign standards, combined with the direction of standardization development in China, and make the project's technology advanced and feasible. We refer to ASTM F 1816-97 (2004), "children's upper body clothing belt safety requirements", EN 14682:2007 "children's wear rope and belt safety requirements", and BS 7907:1997 "improve the safety of children's clothing design and production implementation norms" and other related technical information.

At the same time, the standard drafting group has extensively communicated with enterprises, universities and relevant technology research institutes, and has determined the contents of the standard according to the actual application.

Therefore, the feasibility of the three children's clothing safety standards has been well demonstrated.

Safety of sharp objects

The safety of children's wear parts has been attached importance to. The purchase of children's clothing materials and components, the details of clothing design, the steps of production, the inspection and testing of materials and clothing, and the standards of clothing safety in our country have comprehensively expounded the matters needing attention in the safety of children's clothing machinery.

Especially the safety of sharp objects.

Safety of small parts falling off

GB/T 22704-2008 specification for the design and production of children's clothing designed to improve mechanical safety provides detailed provisions on the strength of clothing components.

The fabric used for supporting suture components should not be torn under low load. Suitable reinforcement should be used at the suture part.

Children's clothing should not be used in single thread sewing thread.

Children under three and under three years old (height 90cm and below) should not use POM balls.

Lace, patterns and labels should not be pasted on clothing only with adhesives. They should be guaranteed not to fall off after finishing many garments.

(d) clothes with floc or foam shall not be filled by children to ensure safety and reliability.

During the production of garments, the stitching of the coated materials should be ensured to prevent the stitches from breaking and breaking.

It is not suitable for children under three years of age or under three years old (height 90cm and below).

For children's clothing below 12 months (height 75cm and below), there should be no loose and unpruned lines over 1 cm at hand or foot.

The process of locking stitches and hand stitches should be effectively controlled, and buttons fasten on garments should be firm.

Under the age of three or under three (height 90cm and below) children's clothing, to prevent eating by mistake, the bow should be fixed, and the butterfly ends should not exceed 5cm.

The ends of ribbons and bow ties should be fully secured to ensure that they are not released.

(five) combustion performance

As an important safety index for children's pajamas, flammability has no corresponding industry and national standards as a test method, and the detection methods are different.

Therefore, it is necessary to formulate national standards to regulate the flammability test methods of children's pajamas, protect consumers' rights and interests, and promote the healthy development of children's wear industry.

The national garment Standardization Technical Committee has reported to the GB on the national standard plan for testing the flammability of children's pajamas.

The establishment of this standard will make the testing methods of domestic pajamas garments in China reach the same with foreign standards, put forward higher requirements for the testing work of the domestic garment industry, thoroughly solve the technical barriers to international trade, promote international cooperation and trade, and make foreign consumers full of confidence in the quality of Chinese products.

This standard specifies the test method for the combustion properties of children's pajamas and their textiles, and measures their fire resistance according to their carbonization length.

This standard specifies the water washing method for children's pajamas.

All children pajamas must be tested before and after 50 washings.

This standard applies only to the determination of the combustion performance of children's pajamas over 9 months and below 14 years of age.

Summary

In recent years, the national garment Standardization Technical Committee has further perfected and perfected the standard system of China's garment industry. On the basis of supplementing and improving the standards of children's clothing products, it has formulated the urgent standards and testing standards for the garment industry, so as to further enrich and improve the standard system of children's clothing, and provide necessary technical support for the whole industry.

The bid committee has constantly improved the standard and technology level of Chinese clothing standards. It has made full use of the standards at home and abroad to make amendments to the standards of children's clothing in China, thoroughly solve the technical barriers to international trade, promote international cooperation and trade, and make foreign consumers full of confidence in the quality of Chinese products. This will play a positive role in standardizing the clothing sales market and promoting the quality level of Chinese clothing products.