Identification Of Fabric Finishing

First,

1. Grinding

2. Calendering or calendering.

3, embossing or embossing.

4. Flocking

5, coating (a, dry coating; B, wet coating; C, pfer coating is also called centrifugal paper coating).

6, PVC calender

7, composite (a, TPU film PTFE film patch; B, fabric composite)

8, bronzing

9, printing (a, pfer printing, B, pigment printing, C, screen printing)

10. Trimming

11. Embroidery

12, cut flowers

13. Finishing

14, crumple

Spin

Two, specific examples of analysis

Denim cloth is brighter, soft and has pin holes, usually after desizing and mercerizing.

Rough and slanting card fabrics are usually ground. According to the condition of the cloth, if the surface and groove have a deeper color, it is to dye the semi-finished products before dyeing.

If the groove is deep and the stripes are white, it is dyed and ground.

The mercerized fabric has good gloss, soft handle and strong water absorption and absorptive capacity.

The fabrics treated with singeing have less hairiness and clearer and clearer texture.

The fabric treated with glue is stiff, slippery and moist.

Napped fabrics are usually knitted fabrics with long fuzz.

After being treated with cellulase, cotton fabric feels light, soft and feels more dry.

Cloth with needle holes is usually treated by calendering and heat treatment.

The twisted twisted synthetic filament fabric feels smooth and elegant.

Non twist chemical filament fabric feels soft and glossy.

The warp / yarn twist is in accordance with fabric structure, and the fabric texture is very clear.

The alkali reducing fabric has strong silk thread and fine texture.