• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Talking About The Process Of Making Leather Shoes

    2010/8/2 18:00:00 81

    Shoe Material Upper Leather

    One Shoe material Quality includes Shoe upper And the two parts of the shoe should be distinguished. Leatherwear Authenticity


    Natural leather is Genuine leather It has pores. When you can't see clearly with your eyes, you can press the skin with your thumb to see if there is a fine leather pattern beside your thumb. It has fine texture, disappearance of fine lines after releasing hands, good elasticity of leather shoes, and better natural leather. If there is no fine grain, most of them are not natural leather, including two layers of shaving film leather.


    natural Leatherwear Another notable feature is that there are blemishes on the surface. Generally, the natural leather upper is slightly defective in the inside of the shoe and in other inconspicuous places, such as uneven skin width, bright furuncle, tick boil and so on. There are three layers of cross section of natural leather, which are dense and different. The epidermis is very fine and flexible, and there are dense dermis in the middle. The following is a loose meat surface fiber layer, and there is no obvious demarcation between layers.


    Leather shoes are used as reinforcing materials to prevent extended deformation and improve foot touch. It is required that the shoe lining material has fine touch, breathability, excellent moisture absorption and moisture retention, and no color loss. The middle and upper leather shoes are made of natural leather and cotton cloth. If the vamp is natural leather, the shoe lining is the artificial substitute leather. It can only be regarded as the middle and low grade shoes. Most consumers ignore the choice and identification of shoe lining materials, which is wrong.


    2. view Upper The quality of the processing is identified by sewing thread and bonding seam.


    See if there is a broken line and whether the upper stitch is neat and regular. In particular, the bonding part of the adhesive shoe leather bottom should be glued and smoothed without any gap, and there is no indication of virtual sewing and glue opening.


    3. touch the inner cavity of your shoes with your hands to see if there is any bump in the inside and bottom of the shoes.


    Wherever you can touch your feet, you can't be bumpy or your feet will blister. The shoe must be provided with an insole, which is designed to keep the shoes clean, covering the rugged nails at the bottom and improving the touch of the feet.


    4. use hand to pinch the heel of the upper to see if it is stiff and elastic.


    It is not necessary to have a groove mark on the rear part of the rigid part, and the elasticity below the ankle is not good enough to damage the ankle.


    5. press the bottom of the waist to see if it is hard.


    The bottom of the shoe is the trunk and skeleton of the shoe, and press hard as the bottom of the shoe. If the skeleton and trunk are not stiff, the shoes must be deformed and damaged.


    6., put your shoes on the table or glass panel at random, to see if the shoes are stable.


    When shoes are placed on the table, the left and right sides should be suspended immediately.


    7. use the middle finger tip under the front toe sole to see if the height is suitable.


    When the head of the shoe tip is exactly enough for the middle finger to indicate the belly thickness, it indicates that the front toe of the shoe tip is suitable. When the front toe of the shoe tip is too large, the stability is reduced; the shoe toe is worn quickly before the foot is lifted, the shoe is easily deformed, and the foot is easy to fatigue.


    8. hold your shoes with your hands to see if the soles and heels are touching smoothly.


    Light the sole and heel lightly against the side of the table (or counter), so that the side of the shoe is upturned to view the contact area of the sole. It is better to contact the side of the table with the sole (the widest part of the sole) and the whole heel plane. Otherwise, shoes will be easy to deform and drop heels.


    9. put the shoes on the table and check whether they are right from two directions.


    From the front of the shoe, look at the size of the inside and outside edges of the sole from the top of the table. From the heel of the shoe, check whether the heel is vertical or not, so that it does not tilt to the inside or outside.


    10. use your index finger to stand on the outside side of the shallow shoes to view the upper ankle height.


    The tip of the index finger comes down to the bottom of the shoe, so that the index finger is closer to the upper part of the outer ankle, and the second finger knuckle line of the index finger is highly consistent with the upper arm of the outer ankle. General life shoes, social etiquette shoes, fashion shoes, slightly lower than the index finger second finger knuckle line is good; low waist sports shoes and casual shoes are soft mouth structure, the external ankle height can slightly higher than the index finger second finger joint line.


    11. look down from upper to lower, look at the symmetry of the shoe parts and the deformation of the shoe outline.


    Taking the straight line between the tip of the shoe and the middle point of the heel as the symmetrical axis, see whether the components on the vamp are symmetrical or not. The shoe outline should be folded in the shoe, smooth and round, and the twisted leaf should be twisted into inferior shoes.


    12. understand the shoe's outsole performance and choose the suitable outsole.


    There are a variety of outsole of shoes. According to the main raw materials, they can be divided into rubber base, imitation leather base and plastic bottom. Their properties are: Rubber soles are soft, elastic, skid resistant, wear resistant, heat-resistant and cold resistant. It's just a little heavier.


    Imitation leather sole, light, stiff, wearable and resistant to twists and turns. But the elasticity is poor and not too slippery. Plastic sole has good abrasion resistance and elasticity. But the texture is hard, and the heat resistance and cold resistance are poor.

    • Related reading

    了解鞋設(shè)計的主要分類

    Recommended topics
    |
    2010/8/2 17:58:00
    29

    羊皮鞋怎樣保護

    Recommended topics
    |
    2010/8/2 17:51:00
    274

    羊皮鞋怎樣保護

    Recommended topics
    |
    2010/8/2 17:51:00
    66

    How To Deal With Moldy Leather Shoes?

    Recommended topics
    |
    2010/8/2 17:48:00
    1411

    Cross Boundary Shoes, The Best Choice For Fashion Industry

    Recommended topics
    |
    2010/8/2 17:44:00
    51
    Read the next article

    Brief Description Of Shoe Production Process

    At the bottom of TPU, the raw materials of TPU should be adjusted according to the formula of the chemical process, and then processed by high temperature. Once the raw materials such as EVA and RB.PU are basically the same as those of TPU, the process parameters are different.

    主站蜘蛛池模板: 免费观看性欧美大片无片| 无翼乌全彩之可知子| 国产精品91在线播放| 亚洲无人区视频大全| 91精品欧美一区二区三区| 狠狠综合久久久久综合小说网| 性高湖久久久久久久久aaaaa| 四虎国产精品免费久久| 两个人看的www视频免费完整版| 精品福利视频一区二区三区| 怡红院国产免费| 偷自拍亚洲视频在线观看99| 亚洲娇小性xxxx色| youjizz亚洲| 日韩精品欧美国产精品忘忧草| 国产成人18黄网站麻豆| 久久久国产精品亚洲一区| 色一情一乱一伦麻豆| 少妇挑战三个黑人惨叫4p国语| 俄罗斯一级成人毛片| 97人妻人人揉人人躁人人| 欧美又粗又大又硬又长又爽视频| 大香伊人久久精品一区二区| 亚洲精品欧洲精品| а√最新版地址在线天堂| 老妇激情毛片免费| 日日干夜夜操s8| 再深点灬用力灬太大了| 伊人222综合| 两个人一上一下剧烈运动| 精品一区二区三区在线视频| 天堂√最新版中文在线| 亚洲成年网站在线观看| 黄色免费在线观看网址| 扒开双腿疯狂进出爽爽爽动态图 | 日产乱码免费一卡二卡在线| 哆啪啪免费视频| 99久久免费精品国产72精品九九| 秋霞电影网一区二区三区| 快点cao我要被cao烂了男女| 啊灬啊灬啊灬快灬深用力|