Production Of Tiger Shoe For Children

Children's tiger shoes

A pair of genuine standard tiger shoes must be all sewn by hand.

From the dozen, the sole, the upper, the tiger and the shoe, until the upper and the sole are sewn together, a pair of tiger shoes is basically completed. But after some decoration, they can be finished after they are tied to the tiger beard and sewn on the belt.

It sounds very troublesome, but it's very interesting to do it. I'll show you how to do it next.

Beat up

The first step is to fight.

This is a necessary raw material for tiger head shoes. The sole and upper are made of it, but this is not available, but it is made by women themselves.

First, put a piece of wood on the table or tea table. The plank should be smooth and no cracks. Then lay a layer of paper on the plank, then paste the layers of rag together with the paste made of flour, and the rag should be smoothed. Otherwise, the shoes and shoes will not be comfortable.

Put the good rags in the ventilating place and dry them.

Cut sample

First of all, make a mold with the sole of the shoe, and cut out the sole used for sole. Usually a sole is made of 3-4 layers. Then make 6-8 pairs of shoes.

Then fold the two ends of the sole together and make a simple stitch with the coarse hemp rope, which is the rudiment of the sole.

Covering the sides and laying the bottom are all beautifying the sole. The width of the cloth used for the edge is about 2 centimeters, and the color is lighter. Most of them are light colored small square cloth.

You should pay special attention when cutting the cloth. Do not cut along the texture of the cloth. It should be 45 degree angle with the cloth, and it should be inclined to cut, otherwise the cloth will be narrow and easy to strip off.

When you wrap the edges, you should follow the direction of the sole, evenly and smoothly wrap the cloth around the sole of the shoe. The width and the width of the strips on both sides are the same.

The bottom is in the bottom of the first spread of two layers of cloth, and then a layer of pure color soft cloth, so the sole full of strong, beautiful and generous.

The last layer of soft cloth should be slightly larger than the sole. When sewing, it is necessary to fold the edge into the inside, so that it is slightly smaller than the sole, and then sew it with fine and uniform pins.

After the above preparations, the shoe sole was started.

Don't look at the sole of your shoes. You can only show your face when you walk and lift your feet. But the line of the sole is very particular.

The choice of line must be contrasting with the color of the sole, but it should also be matched with the color line. The color line is usually twisted by multiple threads.

Because the soles are thick, the needles are often used when the soles are put into the shoes, and the needle piercing holes, the large needle leads, the drawing wires and the tight rope are all in one go.

Silk flowers can also produce various shapes, such as oblique arrangement, cross flowers, diamond, and all kinds of designs imaginable.

Women who are ingenious in mind will always come out with flowers that are unique and attractive.

Shoe upper

The third process is to make upper, and the upper is made of bamboo.

A shoe upper is used to make the shape of the upper upper part. The upper is made of two pieces of the same size and shape, so we need to cut four pieces of the upper.

After cutting, simply sew together with the appearance, then make careful trimming and remove the surplus parts.

Note that the back and front part of the upper should be kept a little more, about 0.5 centimeters wide, so as to finally stitch.

The cut that is being cut is the dividing line between the tiger front part and the back upper, and after sewing, these two pieces form tiger face.

And then cut off the appearance and lining of the upper.

The upper is mostly satin, or red or green, and the color is bright; the upper of the upper is cotton cloth, soft and comfortable, and the color is elegant.

Paste the cut face and the paste into paste on the top. The position should be aligned, the adhesive must be smooth, the upper part of the upper can only be trimmed, and the front part can not be pasted, because this part will have a tiger face in the future.

After the air is dried, the whole upper is trimmed and trimmed.

{page_break}

Embroidered tiger face

The tiger face is also handed down from the ancestral home. The ingenious women have already memorized them, and cutting them with random hands is a vivid form.

Put the cut on the black cloth used to rust the tiger's face and draw the shape with a pen.

Face flower shape can be hand embroidered or sewing machine embroidered. Nowadays most people use sewing machine embroidered tiger face, but no matter how to do it, women's ingenious design and devotion can be inseparable from it.

Embroidered tiger face first embroidered from tiger nose, then eyebrows, eyes, mouth, teeth, and the big "King" word, soon appeared in the hands of the girls.

Finally, the gold thread is used to hook up the whole tiger face.

Tiger face is the most colorful place for tiger shoes. A few lines of colored silk are turned into a vibrant tiger face in the twinkling of an eye.

With the change of time and the change of the region, facial modelling has become rich and colorful. There are mother and son tigers, kylin tigers, Wang tigers, sparrows, and so on. There are many other small animals on the tiger's face, such as butterflies, dragonflies, magpies and so on. There are many kinds of flowers, all in Personal eye and preferences.

Cut the embroidered tiger face, cut it into the same shape as the front part of the upper, then put the tiger face on the upper with the hemming.

The cloth used for Bao tiger's face is basically the same as that of the sole, but it can be narrower.

Put the tiger face on the front part of the upper part of the upper tiger face, then put the wrapped cloth on the top of the tiger's face, aligned the edges, and sew the three pieces together.

Sewing along the tiger face, in order to sew up, including two tiger ears.

Then the cloth will be rolled down and sewn again. This needle should not be tied to the cloth, but a small piece of black cloth on the embroidered tiger face, so that it does not seem to see the stitch from the front.

After a good tiger face, there is still a working procedure to cover the shoe.

The shoe mouth is actually the place where the upper shoe is kept as a shoe, and the same way is used for wrapping the edges so as to make the shoes look neat, beautiful and generous.

So the whole shoe part is ready.

Shoe upper

When the sole and the upper are all ready, they will be stitched together, that is, the upper shoe.

First fold the front face of the upper, fold it and stitch it.

Then tighten the part of the tiger face to the front of the upper.

When you start your shoes, start with the front tiger face, and the stitches should be evenly tied.

You can also turn the upper edge of the upper into a small slip so as to facilitate piercing.

The upper shoe needs needles, hemp rope and big needle to cooperate with each other, the needle piercing hole, the big needle lead wire, the pulling wire and the tight rope are at one go.

When the sides are up to the middle, the upper part of the upper is properly matched and then sewn up, and then the upper shoe is continued.

Tie tiger beard

Tiger beard is made of colored wool.

First, choose the wool that is in harmony with the tiger's shoes, take about six or seven small locks, circle around the fingers, cut them on the sides of the tiger's mouth, and trim them into velvet globule.

At once, the tiger shoes had more aura.

When the children put on this tiger shoe and walk, the two tigers must make the tiger move up and down, which is very attractive.

After the tiger shoes are ready, do not forget to send shoes, there are still a lot of stress, sending six pairs, eight pairs, two pairs, many good, good grandma's shoes can not sew, shoelaces should be let Grandma sew up, it is said that this will make the doll rich and expensive.