Shoe Making Technology: The Decoration Of Sports Shoes

　　 Gym shoes The range of decoration can be started from several aspects, such as the shape of the last shape, the shape and the color of the bottom part, the texture and the process of the material. The following is a brief description of the process.

1. Decorating hole

Often used in toe and side. It is an early and the simplest method of decoration, which can increase decoration and air permeability and kill two birds with one stone.

2, car false line

In general, get off the double line to increase the roughness of the line, appear rough and powerful; when the line is dense, the single line of the car is better, which can increase the flexibility of the line.

3, car accessories

This process is evolved from the fake process of the vehicle and has been used so far. When designing, attention should be paid to the location, shape and choice of material and color.

4, car hollowing out

If the car decorations are the relief of Yang Wen, the hollowing out of the car is a kind of relief of Yin.

5, computer embroidery

Multipurpose Shoes tongue , eyebrow, back sleeve, sideways and so on. Apart from the changes in shape, color, texture and so on, the most prominent feature of computer embroidery is the change in luster. Because the embroidery line has natural and pleasing luster, it makes the embroidery particularly attractive and attractive, so it can improve the grade and the price of the shoes.

6. Hemming

It can make the lines smooth, neat and smooth. It not only improves the strength, but also highlights the outline of the parts.

The six front decoration processes are the traditional processing methods of footwear industry. With the progress of science and technology, some processing methods in other industries are often borrowed, such as screen printing, transfer printing, injection molding and welding of plastic industry, high frequency embossing of leather industry, etc. The application of new technology has brought about great changes in the appearance of sports shoes, and has also brought new ideas to the design of sports shoes.

7. Printing

At present, most of the printing of sports shoes are screen printing. The operation is simple and the cost is low. In addition to the change of shape, it is more important to enrich the variety of sports shoes through the change of color.

8, differentiation

The so-called differentiation is actually the printing process of the printing industry. It has higher efficiency and better quality than silk screen printing. The advantage is that several colors can be used in one operation, and it does not impede the clarity and smoothness of the pattern, especially when it shows a hazy or gradual effect.

9. Drop molding

The drop plastic part is a small piece of product that is produced by injection process in plastic industry and suitable for decoration of sports shoes. The drop molding is an operation to stitch plastic parts onto the surface. It is commonly used in shoes eyes, back sleeves, sideways and so on.

10, eagerly

It is a decorative method of cutting the thermoplastic material by heating the mould and cutting it, and welding it on the part of the plastic part, and producing a color floating pattern. This process is also a simple and economical method of decoration, with shape change, color change, three-dimensional change and gloss change. The decorative parts are brighter and brighter than print.

11, high frequency

This process comes from the high frequency embossing process of leather. To be precise, high frequency is a kind of heating mode. Under the action of high frequency electric field, strong friction and heat are generated between the molecules of the material, so that heat is generated continuously inside the material. At this point, through pressing the mold, a clear pattern can be pressed in a short time without damaging the material. This process is better than the stereoscopic effect of hot cutting technology, so it is widely used at present.