Calculation Of The Size Of Woven Garments

Calculation of braided dimensions of each part of jacket

Rear piece

- 1 centimeters) pverse thickness + seam consumption (PIN) 2. length line = (body length - bottom edge rib) * long straight line 3. body length = body length - bottom edge rib - hanging shoulder) * straight width 4. shoulder width needle = shoulder width * pverse seam consumption (needle) 5. shoulder length row number = hang shoulder length * straight density 6. shoulder hanging needle number = (1\2 chest number - shoulder width needle number) 27. 27. hanging shoulder needle method: after 3 3 to 6 needles, she needle generally reduces 2 needles per 2, at the height of centimeter to centimeter height, the number of receivable will be collected. 1. the needle at the bottom is = (1/2 chest circumference).

2. the number of the back necklines = the width of the back neckline, the pverse thickness and the seam consumption (needle) 9. the number of single shoulder pins = (the width of the needle number of the shoulder pin and the number of the wide neckline). 210., the number of needles per row on the shoulder slope is equal to the number of single shoulder pins, the number of shoulders is high, the front part of the coat is 1., the bottom edge is needling = (1/2 chest circumference + 1 centimeters) * pverse density + seam consumption (needle) 2. body length row number, and the same as the rear piece "2".

3. the number of long walks is the same as that of the last film "3".

4. the number of shoulder width needles is the same as that of the rear piece "4".

5. the number of the total number of hanging shoulders is the same as that of the rear piece "5".

6. the number of stitches on the shoulder is the same as that of the rear piece "6".

7. hang the shoulder to receive the needle method: may contrast the back piece, but the front piece is 1 centimeters more than the rear piece, the collection needle must receive more times than the latter piece.

Can be collected at the time of the 1 cm of the number of pins.

When the sleeves are woven, the length and density of the sleeves are slightly different from that of the original density: the sleeve density is equal to the original density * 125% sleeves straight density = the density 95%1. sleeve cuff needle = sleeve width x 2 x sleeve pverse density + seam consumption (PIN) 2. sleeve length row = (sleeve length cuff rib length) * sleeve straight density + seam consumption (needle) 3. sleeve root needle number = sleeve width 2 * sleeve pverse density + seam consumption (needle) 4. sleeve body should be stitched per side = needle number.

Number of sleeves (25.): number of sleeves: number of sleeves, number of sleeves, number of rows of 6. sleeves, number of sleeves, number of sleeves, number of sleeves, number of sleeves, length of sleeves, sleeves, straight sleeves, + + seams consumption (needle), number of single pin pins on 7. sleeves (= sleeves number of pins, number of sleeves, width of needles), 2 collar, 1. pieces of pin number = (collar depth + 2 + posterior width + 2 cm).

1. generally, adult sleeves are less than 3 centimeters to 3.5 centimeters, and children's sleeves are less than 1.5 centimeters to 2 centimeters.

2. the cuff width of the men's shirt is 21 cm to 24 cm, and the cuff width of the blouse is 17 cm to 21 cm.

3. when knitting sleeves, if you add needles, you should speed up first and then slow. If you reduce the needle, slow down first and then fast.

4. the size of the sleeves of adults is usually 12 centimeters to 14 centimeters.

The number of stitches close to the 5. sleeves is close to that of the front and rear shoulders.

6. for knitting operation is simple, general neckline can not be considered.

7. the width of the back neckline is generally 1/3 with shoulder width.

The knitting size of each part of the undergarment is calculated. The knitting of the trousers is faster and more convenient. Generally, it is divided into two parts: the left and right trousers, plus a crotch block.

When weaving, if you start knitting from the waist of your trousers, the folding of the waist of trousers will be more effortless, but the trouser legs will be troublesome when they reduce the needles. Conversely, starting from the trouser legs, the waist of the trouser legs will be somewhat difficult. The trouser legs can be easily knitted and the waisted waistlines will be easier to knit.

This needs to be decided according to its specific circumstances.

Here are three knitting methods for a pair of trousers: two piece knitting.

1. waist needles = waist circumference 2

2. trousers long line = (trousers long waist rib - pants rib) * straight density.

3. waist backward.

The rear warpage is generally about 3 centimeters higher, about 4~5 return routes (8~10 lines).

When knitting, take the waist width needle number, divide it into the front and back waist, then divide the number of the back waist by the number of return stroke (that is, 4~5 return trips).

If the needle is pulled from the trouser leg, it should be knitted by the method of reducing the needle.

4. hip width needle = hip circumference 2

5. the number of needles should be increased on the crotch: the number of buttocks and the number of waist width needles.

6. the length of the upper crotch = (straight crotch waist rib) * straight density.

7. the number of rows on the crotch plus the needle: the front side = the length of the upper crotch (the number of 1/4 on the crotch should be increased), the back side = the length of the upper crotch (3/4 of the upper crotch should be increased).

8. cross crotch pin = buttocks width needle + (front crotch width + rear crotch width) * cross thickness or cross crotch number = pverse crotch width * cross thickness.

9. trouser legs = (trousers long straight crotch).

* direct density

10. the number of trouser legs should be reduced = the number of pverse crotch needles.

11. the number of trouser legs to reduce stitches is (= the number of trouser legs after 2- is less than that of crotch).

12. the number of crotch should be reduced after the crotch = the width of the crotch.

13. the number of the back crotch minus the needle line = the back crotch should be reduced by 2. If the knitting is started from the trouser legs, the "10", "11", "12", "13" and the "reducing needles" in the item should be changed to "adding needles", and the "additional needles" in the "5" and "7" items should be changed to "reducing needles".

Three piece knitting method (plus method)

1. the number of needles on the waist is the same as that of the two knitting method "1".

2. the length of trousers is the same as that of the two knitting method "2".

3. waist backward, and two weaving method "3" the same.

4. the width of the buttocks is the same as that of the two knitting method "4".

5. the number of needles on the crotch should be increased, the same as that of the two knitting method "5".

6. the length of the upper crotch is the same as that of the two knitting method "6".

The length of the upper crotch plus the needle interval = (the length of the upper crotch should be increased by the number of pins on the crotch) = the length of the 28. trouser legs = (trousers length straight crotch - Trouser ribs). The number of trouser legs should be reduced (Dan Ce) = the width of the buttocks, the number of trouser pins is 10., the number of trouser legs is reduced, the number of trouser legs should be reduced, the number of trouser legs should be reduced, the number of 11. legs is 11., the number of square pins is equal to the width of the square, the number of rows is 12., the number of rows is 12., the number of rows is equal to the length of the square, the length of the square is four, the method of four knitting is different from other knitting methods: when the trouser legs are reduced, the outer side of each trouser leg should also be reduced. 7.

The number of needles in the 1. waist of the plain knitting trousers is (=).

Hip circumference 4-1) * cross crotch 4. upper crotch long line = (straight crotch waist rib) * front straight crotch 5. front cross crotch pin = front crotch width + cross width + hip width needle + + (pants tab third item) 6. trouser legs row = = (trousers long straight crotch - pants rib rib) * straight density 7. trouser legs should reduce needle = front horizontal crotch pin number - front trouser leg needle number 8. trouser leg minus needle interval number = trouser leg row number (trouser leg should reduce needle number 2 2). (4-1) * cross tight 2. trousers long line = (trousers long waist rib - pants rib) * straight tight 3. buttocks width needle = (

1. the number of needles at the waist is = (waist circumference 4+1) * pverse density.

2. the length of trousers is the same as that of the front piece "2".

3. waist backward, and two weaving method "3" the same.

4. hip width needle number = (hip circumference 4+1) * pverse length 5. upper crotch long row number, and trousers front piece "4" the same.

6. rear pverse crotch number = rear crotch width * pverse density + hip width needle number (fourth pairs of trousers).

7. the number of trouser legs is the same as that of the front piece "6".

8. after the crotch should reduce the number of needles = the width of the crotch behind the crotch 9. after the crotch minus the needle number = the number of pverse crotch needles - the number of trousers should be reduced after the crotch should be reduced. The number of trouser legs should be 10.. The number of trouser legs should be reduced = the number of pverse crotch needles - the number of needles in the back crotch should be reduced - the number of trouser pins 11. the number of trouser pins = (Trouser width 2 2 + 1).

All knitted fabric weaves, and the finished product is easy to sag. Therefore, when calculating the density of the sample, the number of needles should be increased properly, and the number of straight lines will be reduced.

In addition, waist rib and pants rib rib are smaller than other parts.

1. the number of needles at the waist is = (

The number of 3. hip and wide pin = = (hip hips 4-1) * horizontal crotch 4. straight crotch number = straight crotch * straight crotch 5. front horizontal crotch pin = front crotch width + pverse width + hip width needle (third of the trousers) 6. trouser legs = trousers long line number: straight crotch row number, 7. trouser legs should reduce needle number = front cross crotch needle number, front trouser leg needle number, 8. trouser leg minus needle interval number = trouser leg row number (trouser leg should reduce needle number 2 2), front edge pants pin number = (Trouser mouth width). (4-1) * cross length 2. trousers long line = trousers length * straight density (excluding

1. the number of needles at the waist is = (waist circumference 4+1) * pverse density.

2. the length of trousers is the same as that of the front piece "2".

3. waist backward, and two weaving method "3" the same.

4. hip width needle = (hip circumference 4+1) * pverse density

5. straight crotch line = straight crotch * straight tight.

6. rear pverse crotch number = rear crotch width * pverse density + hip width needle number (fourth pairs of trousers).

7. the number of trouser legs is the same as that of the front piece "6".

8. after the crotch should reduce the number of needles = the width of the crotch behind the crotch 9. after the crotch minus the number of needles = the number of the crotch after the crotch, the number of trouser legs should be reduced = the number of pverse crotch needles - the number of needles in the back crotch should be reduced - the number of trouser pins 11., the number of trouser legs to reduce the number of rows (= the number of trouser legs after the crotch is reduced to 2-, the number of crotch cuts).

The number of men's trousers should be reduced: 1. the number of buttons: the width of the front door, the width of the door, the width of the 2., the number of lines, the number of buttons, the number of lines, the length of the door, the length of the door, the length of the door, the length of the door, the length of the door, the width of the door, and the width of the front door. The knitting is usually done on the right trousers. When knitting to the top (or below) position of the right trousers, the number of needles needed to reach the width of the flap is counted at one time, and Gazi is knitted.

When knitting the left trousers, if the knitted knitted knitted fabric is curled, the knitted fabric can be knitted to the position of the flap, and the number of pins is the same as that of the right trousers.