Discussion On The Development Of The Industry

"

It is urgent to enhance the quality improvement and enhance the quality.

Quality is

Therefore, in 2010, the China Sewing Association launched the "quality improvement and catch-up project". It plans to take 3 years to plan and start, advance and attack, evaluate and identify 3 stages of solid and effective work, and guide enterprises to focus on quality improvement, and shorten the gap between the quality of products and the international advanced level as soon as possible.

The project entered a critical stage.

At the beginning of the planning stage in 2010, the China Sewing association found a gap through a lot of research, physical testing, analysis and demonstration, and put forward the goals and requirements for the quality improvement of the computer high-speed sewing machine and high-speed sewing machine. The documents were refined from 3 aspects, namely, the improvement of product physical quality, the test and detection methods of these indicators, and the whole process control of the enterprise quality assurance system, which provided specific and operational guidance for the quality improvement of the enterprise.

The document was published in the Standing Committee of the Sino Russian Joint Commission in November 2010.

The Sino Japanese Association has widely publicized and called for the production of these two products. According to the objectives and requirements, it has compared its work with the work plan for improving and improving its quality. At present, 7 enterprises, such as ZOJE, Jack, and Hui Bao, have made an active application to the China sewing Association for participating in the pilot work.

This year is an important stage for the promotion and tackling of "quality improvement and catch-up project". The Sino Russian sewing Association will take the lead in organizing and implementing product quality to catch up with the project as the main measure to improve the overall product quality level of the industry.

It is reported that through research, looking for gaps, developing and releasing the industry quality surpassing standards, guiding enterprises in the industry to implement extensive product quality improvement and upgrading work; by promoting key enterprises to carry out product quality improvement and overtaking engineering projects, leading the industry's leading products in a large quantity to achieve or surpass the international advanced quality level. Special industrial sewing equipment is fully close to the international advanced quality level, playing an exemplary role in the industry, and achieving all-round upgrading of the whole industry's product quality level, so as to truly create the domestic brand.

Tackling tough measures throughout the year

The detailed implementation of quality work has always been a difficult problem.

In 2011, in the key work plan of the China Sewing Association, the author noted that the implementation of the project of "quality improvement and overtaking projects" was carried out for the whole year.

He Ye said that the main body of quality tackling is the enterprise, but the sewing Association will promote the enterprise's tackling hard activities through a series of specific work measures throughout the year, and provide concrete support and help for enterprises.

She said that this year's work carried out by the China Sewing Association around quality improvement: first, we should further refine and perfect the "quality improvement goals and requirements" issued in 2010, analyze, detect and demonstrate the latest prototype of advanced foreign countries in a wider range, and establish a more detailed quality improvement target system, that is, specific indicators reflecting the quality level and quantifiable, detectable and evaluable specific items under this index.

According to reports, what are the gaps in the service life and how to detect them? It needs to be decomposed into 5 indicators, such as the wearing status of 5 institutions, such as piercing cloth mechanism, feeding mechanism, thread picking mechanism, hook line mechanism and wire shearing mechanism.

By testing the initial state of foreign prototypes and the use of a certain time (such as 500 hours, etc.), the gap and wear amount can be provided to the enterprise as a basis for catching up.

Two, on the basis of establishing the target system, we should organize industry experts, testing organizations and enterprises involved in the pilot work to study and formulate unified test methods for various indicators, and provide them to industry enterprises, so that enterprises participating in the pilot work can carry out objective and phased evaluation of their products on a unified platform with a unified testing method.

The three is to set up an expert team to provide consulting services to enterprises, mainly pilot enterprises, to track, supervise and serve the progress, methods and measures of enterprises.

The four is to organize quality management training, information dissemination and communication, common quality problems and key technology research in the industry, and plan to hold a quality exchange conference at the end of the year.

Through the above work, we should effectively promote the attention of the whole industry to quality work and solve the key problems that restrict the quality of products.

On the basis of the above work, next year's assessment and accreditation phase, the association will organize the quality evaluation and recognition of overtaking products, publicize the products of the international advanced level, and commend and reward the effective enterprises and individuals for quality work.

Full start of "12th Five-Year" technological innovation, independent innovation is the only way to pformation and upgrading.

During the "11th Five-Year", although the technological development of the sewing machinery industry in China has made great progress, the development of industry and technology can not effectively meet the increasing demand of the current market. The ability of scientific and technological innovation and the speed of promotion are still lagging behind the needs of the adjustment of the industry structure and the pformation and upgrading.

The rising cost and the shortage of spare parts are the most concentrated problems in the current enterprises. What is more troubling is the compression of the profit margins caused by the enterprises, the decline of the overall profit level of the industry, the lack of confidence in the parts and components enterprises, and the urgent need for pformation and upgrading, which seriously affects the sustainable development ability of the industry.

This is the main contradiction and deep-seated problem that hinders the further upgrading of the industry.

It is reported that in the past two years, with the increasingly fierce market competition and the acceleration of localization in the field of special machines and electronic control systems, the intensity of intellectual property disputes between enterprises at home and abroad has been increasing rapidly.

Therefore, we must also change the way of economic growth on the basis of ourselves, and step out of a new way of independent innovation.

Scientific and technological innovation is the main direction of "12th Five-Year"

He Ye introduced that the main task of the industry "12th Five-Year" development plan is to pform the mode of economic growth and achieve pformation and upgrading.

Therefore, the Sino Japanese Association of science and technology innovation promotion work as the main direction of pformation and upgrading of the industry, scientific and technological innovation work will become the "12th Five-Year" period, a key and sustainable work main line goes deep.

Specific ideas and measures include:

The first is to strengthen the organizational guarantee for the sci tech work.

We should further improve the functions of the science and Technology Committee of the industry, give full play to the role of the sci tech Committee in the planning, guidance and coordination of science and technology in the industry, strengthen the work responsibilities and mechanism construction of the office of the technological progress center and the sci tech Committee, integrate the advantageous resources of the scientific research institutions, and set up an expert library that can guide and serve the industry, so as to provide an organizational guarantee for the scientific and technological work in the industry.

The two is to further increase the investment in science and technology work of China Sewing Association.

During the "12th Five-Year" period, the Sino Japanese Association predicted that 6 million yuan (not including this year's Award for the 11th Five-Year "science and technology innovation achievement award") would be invested in science and technology, which was mainly used for funding the industry's common basic projects in the "12th Five-Year" science and technology guide, scientific and technological innovation and personnel awards, knowledge updating and training of technological and skilled talents, and providing scientific and technological consulting services to enterprises.

Three, we should take the implementation of the national science and technology support project and the "12th Five-Year" science and technology guide release as an opportunity to guide and encourage enterprises to increase investment in technological innovation, and promote enterprises to set up various types of Enterprise Oriented Innovation Alliances with enterprises as the main body, improve the scientific research system of enterprises, and enhance the scientific and technological innovation ability of the whole industry.

Four is to increase the introduction and training of innovative talents in the industry.

We will continue to actively follow up the implementation of the professional training of students in the Mechanical Engineering School of Beijing Technology and Business University. By setting up scholarships, organizing expert lectures and other measures, we will attract interested people to join in the sewing machinery industry. We will increase the continuing education and training for the existing talents in the industry. Following the launching of the new technology application training last year, we will also launch a training course on "institutional innovation design and simulation" in Taizhou, Zhejiang. We will continue to deepen the national vocational skills training and appraisal work in August, further promote the professional qualification certification system, and strive to continuously improve the coverage ratio of the professional qualification certification system to the maintenance workers and assemblers.

{page_break}

Five tasks were comprehensively promoted in 2011

This year is the beginning of the year 12th Five-Year, and also a key year in the scientific and technological development of the industry.

The main tasks of this year's technology development are:

The first is to carry out the on-site acceptance of the "11th Five-Year" scientific and technological innovation achievements project, and give a big reward to the "11th Five-Year" scientific and technological innovation achievements, and give awards during the period of CISMA 2011.

The two is to start the project of "12th Five-Year" science and technology guide project. For the common basic theory and key technology research of the industry, the China Sewing Association will also provide financial support, and the corresponding management measures will be introduced in the near future.

The three is to continue to carry out the continuing education work of the technical backbone leaders of the industry. In August, a 4 day training course on "institutional innovation design and simulation" was held in Taizhou. All the staff members who participated in the training will be subsidized 50% of the training cost.

At the same time, China Sewing association also plans to invite famous universities and professional research institutes such as University of Science and Technology Beijing and Mechanical Science Research Institute to hold lectures on the theme of sewing machine product design and development of new technologies during the period of CISMA2011, so as to improve the innovative ability of professional and technical personnel in the industry.

The four is to actively expand and introduce external scientific and technological resources in the form of seminars, seminars and other forms of organization, and organize an activity of sewing machinery enterprises to participate in the work of sewing machinery enterprises, which is attended by experts and professors from famous universities and research institutes in China.

Five, we should continue to build and improve the channels of communication between the apparel associations and backbone garment enterprises and other downstream organizations. We plan to organize a research activity for downstream users such as clothing, strengthen the understanding of garment processing technology, and provide information feedback and collection efforts for the functions of sewing machinery and equipment, so as to provide ideas and directions for enterprises to further develop products, and also provide equipment and technical support for garment enterprises to change their production modes and improve their productivity.

In 2011, it was destined to be a year of frequent industrial events. CISMA2011 was held, Council changed, and the second skills competition ended.

He Ye said that the industry "12th Five-Year" development plan clearly pointed out that, at the end of 12th Five-Year, the industry innovation ability is close to the international advanced level, and the quality and brand basically have the strength to compete with the internationally renowned enterprises on the same platform. The industrial structure and profitability level have the ability to support Ye Jiankang and sustainable development, and achieve the goal of making the first step to the world sewing machine power.