Lin Pu Town Garment Factory Fire, No Casualties

The fire burned for 4 hours and smoked.

At 10:30 am yesterday, the workshop of a garment factory in the industrial park of Lin Pu town was on fire.

12 fire engines fought to save water from a nearby sewage treatment pond until the fire broke out until about half past two pm.

At 10:30 a.m. yesterday, Hangzhou Rong Jia Garments Co., Ltd. located in the industrial park of Lin Pu town.

After receiving the news, the reporter went to the scene of the fire and saw the smoke from the factory.

When the reporter arrived at the scene, he found that the factory area was full of fire engines, and the firemen used water guns to aim at the flames. The smoke from the windows continued to roll up with the flames.

Firefighters told reporters that the fire building is concrete structure, a total of three storeys, fire location on the first floor.

The first floor is a warehouse and a workshop, about more than 600 square meters.

Because the fire area is large and the fire is very strong, it is easy to ignite the two layers above and form three-dimensional combustion. The internal condition of the plant is very complicated.

Reporters interviewed learned that when the fire started, because the water source was far away, plus the wall hydrant did not have pressure, the staff did not achieve good results in the fire fighting, firefighters just arrived at the scene feel very difficult.

After the Xiaoshan fire brigade's follow-up forces have been put in place, the commander immediately adjusts the fire extinguishing plan.

The firemen stopped the American big dragon type a foam car at a distance of 300 meters away from the fire yard, and pumped water from a pond to provide water for two main lines to ensure that the fire source was constantly extinguishing.

Meanwhile, firefighters use their hands to pump the water from a nearby factory sewage treatment pond.

With the source of water, the 43 meters up vehicle of the Jin Li Pu full-time fire brigade will be able to cut off the fire and prevent the fire from spreading to the two floor, and organize a fire fighting team. Members will wear air breathing apparatus and carry water guns on the two floor to carry out internal attacks and detect fire.

{page_break}

At 12:40 noon yesterday, the fire was controlled on the first floor, and the water in the sewage plant near the factory was sucked up.

Around half past two p.m., the fire was completely extinguished. In order to prevent the recurrence of fire, the firefighters also cooled the fire and the interior of the building, and confirmed that there was no reburning at the scene, and then evacuated after clearing the scene.

An employee of the garment factory said it was like a power distribution room beside the workshop.

It is understood that the fire did not cause casualties, the cause of the fire and the cause of the fire is still under investigation.