Zhejiang Has Detected A Batch Of Failed Garments Exported To Europe.

Recently, Zhejiang Ningbo inspection and Quarantine Bureau Textile Inspection Center detected a batch of European exports of buttons, zippers, applique and other accessories total lead content exceeded.

The total lead content in the resin buttons of the batch products is as high as 3200mg/kg.

For 370mg/kg, it is far beyond the limit requirement of 90mg/kg in the environmental protection textile standard (Oeko-tex Standard 100).

According to introduction, the batch

The total lead source of zippers has two aspects: one is the lead salt stabilizer commonly used in plastic production.

Lead salts stabilizers are widely used in the production of opaque plastic products because of their good thermal stability, excellent electrical properties and low cost.

The two is the lead dyes, pigments and auxiliaries used in the coloring process of plastics.

Most garment enterprises and buttons and zipper manufacturers generally pay attention to the heavy metal content of metal buttons, button buttons, and zipper metal materials. For resin accessories, the physical safety properties such as button adhesion, zipper strength and zipper durability are generally tested.

Resin buttons and zippers are low in price and low in mould requirements. They are widely used in clothing production. Therefore, the quality and safety of such products should arouse the attention of export garment enterprises.

In recent years, the importance of accessories such as zippers, buttons, hot drills and metal fasteners in clothing design has been increasingly emphasized. Especially, some accessories with design sense are widely applied to embellish fashionable women's clothing and casual clothes, so as to improve the grade and value of clothing.

The environmental protection of clothing can not be separated from the environmental protection of Kaiyuan materials. Besides the two functions of practicability and decoration, accessories should also ensure health, safety and environmental protection.

Therefore, the relevant clothing export processing enterprises should increase the quality and safety management and control of plastic excipients, and send the accessories to the third party if necessary.

Test to verify the effectiveness of the test results of raw material suppliers, organize production strictly according to the import country's technical regulations and standards, do not blindly comply with customer requirements, pay more attention to potential hazards of products.