Fashion Shoelaces Make Your Canvas Shoes Different.

Canvas shoe

Brought about by the market.

Different

The system makes you a fashion person.

Twist knot

1 two shoelaces come out after knotting.

2 two shoelaces crossed after crossing second holes.

3 at this point, try to tighten your shoelaces as much as possible.

4 produce a twist in the process of making the intersection center centered.

5 leave the last hole.

6 finally, use X shape to handle, so it is convenient to wear.

7 the remaining shoelaces are placed in the shoes and knotted together.

Trapezoidal junction

1 adjust the length of the shoelace, pull the shoelaces from the inside to outside.

2 pull out shoelaces, pierce second holes from outside to inside.

3 the left shoelace comes out from the shoelace between the two holes on the right side, and the right side is identical.

4 pay attention to the direction of crossing at both ends.

5 the extra shoelaces are stuck in the shoes and knotted.

Internal X junction

1 both ends of the shoelace remain the same, and the ends are piercing from second holes.

2 go through a hole and wear it out of three holes.

3 repeat the first two processes in turn.

4 the length of shoelace needs 90~95cm.

5 the remaining shoelaces are measured in knots.

Double straight knot

1 left a length of shoelace and wear it from the right side.

2 then wear the shoelaces in the direction of the dotted line in turn.

3 adjust the shoelace and keep it in shape. Do not roll it up.

4 the extra part is stuffed into the shoe.

5 also leave the white shoelace on the inside and tie it with the Yellow shoelace.

6 wear a shoelace like yellow.

7 adjust the white shoelace to make it on the Yellow shoelace.

8 the excess part is tied inside the shoelace and the Yellow shoelace.

Double X junction

1 starting from second holes, one from outside to inside across the shoelace.

2 first use the X knot method to tie the white shoelace.

3 terminal plug to tie knot after internal measurement.

4 the blue shoelace goes through the first hole, X knot, crosses the white shoelace.

5 knot the end of the blue shoelace.

6 the remaining lines are long enough to make a ring, which passes through a few circles and passes through it.

Crisscross knot

1 one end knots on the inside, the other ends punching one hole in order.

2 keep down in the same way.

3 after the repetition, the remaining shoelaces are stuck to the inside knots.

4 purple laces are also perforated in the same way.

5 put it in from below and wear it from above.

6 choose the color of shoelace according to the color of shoes.

7 extra shoelace knots on the inside.