Asymmetric Leather Shoe Last Design

Asymmetric leather shoes are different styles of inside and outside malleolus.

This style of leather shoes breaks the symmetry and balance of the modeling principle, strives to help the changes in style and match with the popular bias shoe last (also known as foot last), with a repeated asymmetric modeling, so that the whole shoe complement each other.

According to the characteristics and line segmentation methods of asymmetric leather shoes, it can be divided into the following categories: (1) rotary type: an evolution of the outer ear type, the inner ankle shoe ear is evolved into a tripping belt, and the shoe around the outer ankle shoe is combined with the shoe buckle.

(2) false cover type: the lateral malleolus is the combination of the surrounding cover and the surrounding strip. The medial malleolus is a whole structure. It is unexpected and reasonable. It makes people feel very friendly.

(3) slanting head type: the front part is divided into Baotou shaped parts, but the Baotou line adopts oblique lines. Usually the medial malleolus is in front, and the lateral malleolus is in the rear, which is consistent with the human foot bone.

The combination of the reverse stitching method makes the inner and outer ankle parts asymmetric, which is different from the traditional three quarter leather shoes in Baotou.

(4) slanting door type: refers to the style that the mouth door of shallow leather shoes is inclined or slanted, and the shape of the inside and outside ankles is completely different.

A rotary leather shoes (one) half sticking method 1. sticks to the last shoe, according to the outer ear shoes style, first draw the shape of the lateral malleolus.

2. draw the inner ear ankle tie shoe ear on the outer ankle shoe ear part. The method is: when drawing to the middle suture, then fold it and draw it on the outer ankle shoe ear, so the inner ankle tie shoe shoe is made up of two parts.

3. sampling method: when sampling the inner ear ankle shoe, the shoe ear part should be removed first and the tie belt part removed. Then the two parts will be combined.

If the alignment of the joint is not smooth, minor modifications should be made, so that the complete inner ear ankle strap shoe ear template can be obtained.

The 4. way of the curve is: the inner ear ankle tie shoe ears are located in the middle of the shoe last, so there is no seesaw.

However, considering the influence of the thickness of the material in the shoes, after handling the difference between the inside and outside ankle of the shoe lock point, it should be lengthened about 2~3?

5. determine the fixed position of the buckle on the outer ankle shoes.

(two) the local full paste method, called the local full paste method, is to place all the internal and lateral malleolus at the unsymmetrical parts. In order to obtain the template for the medial malleolus, all the internal and external malleolus should be pasted.

1. use the tattoo paper to stick the last: when it is placed close to the medial ankle shoes, make the pattern slip around the back line of the shoe last, and attach all the inside and outside ankle surfaces to the front end of the shoe last.

2. use the kraft paper to paste the last: first put the outer ankle upper surface; then use a rectangular small piece of paper to paste the location of the medial ankle shoes.

The paper must be firmly bonded to the upper ankle at the back line.

3. draw the outline of the inner ear ankle tie shoe on the beautiful paper or kraft paper pasted on the inner ankle, and continue to draw the outline of the belt extending to the outer ankle shoes, and determine the fixed position of the buckle.

4. when sampling, the shoes of the tie shoe can be removed at one time in the inner malleolus, then the outer part of the ankle should be removed with a garish method.

The 5. way of the stilts is the same as the half stick method.

Obviously, part of the whole sticking method, though getting the outline of the inner ear shoes, should ensure that the inside and outside positions of the inner and outer ankle shoes are identical.

So from this perspective, the semi stick rule is better.

Two the fake cover leather shoes (one) half stick the method to stick to the last 1., according to the cover leather shoes style, first draw the outer ankle line.

2. from the position of the cover on the suture line of the last face, extend the line from the medial malleolus to the edge line of the last bottom and draw it onto the upper ankle surface.

3. sampling and winding method for false circumference strip: first take out the outer ankle pattern.

Then the front part of the front part of the medial malleolus is separated from the front part of the front part of the medial malleolus, and then each of them is processed with the difference between the curve and the internal and external ankle. Finally, the two parts can be combined to get the fake fence template.

4. fake cover sample sampling and winding method: first remove the outer ankle cover template.

Then the parts of the front part of the medial malleolus were separated, and then each of them was processed separately. The final two parts were merged to get the fake cover template.

(two) the local full sticking method 1. used the tattoo paper to paste the last part: the front part of the front point to the front length point, the whole paste method was applied, and then only the lateral malleolus was placed.

2. use the kraft paper to paste the last: first put the outer ankle last face, make up the three cuts of the tarsal part, and cut off the excess paper inside the middle seam of the last face.

Then use the last half size of the last paper to stick the front end of the inner ankle last to the front part.

The paper must be firmly bonded to the upper ankle at the back line.

3. draw the outline of the medial malleolus false cover on the beautiful paper or kraft paper affixed to the medial malleolus. In fact, it is only a line extending from the positioning point of the cover on the suture line of the last face to the line on the edge line of the inner ankle last.

4. it is more convenient to sample the fine paper.

But when the koji is processed, the internal and external malleolus should be treated separately and then merged. Of course, it can also be processed without separation, but the operation is complex and difficult to grasp.

Three oblique Baotou leather shoes (one) half post method 1. stick last, according to the leather shoes style, first draw the outer ankle line.

2. a section of the diagonal Baotou extending to the medial malleolus, folded at the back midline of the last face, and drawn to the last surface of the ankle.

3. take the lateral malleolus Baotou line as the boundary, take out the Baotou model and the middle side template of the lateral malleolus, and perform the treatment of the curved stilts.

4. take the medial malleolus oblique Baotou line as the boundary, remove the Baotou model and the middle side template of the medial malleolus, and perform the differential treatment of the koji and the medial and external malleolus.

5. based on the Chinese suture line, the Baotou model of the medial and outer ankle is combined, and the slanted Baotou line is trimmed to make it round and smooth, which means the slanting Baotou model.

Similarly, based on the Chinese suture line, the model of the medial and external ankle joint is merged.

(two) the local full sticking method 1. uses the tattoo paper to paste the last part: from the front point to the front part of the front point, the whole position is applied, and then only the lateral malleolus is placed.

2. use the kraft paper to paste the last: first put the outer ankle last face, make up the three cuts of the tarsal side, and cut the extra kraft paper from the middle side of the last face, then use the half size of the last paper to stick the inner ankle last face to the front point.

The paper must be firmly bonded to the upper ankle at the back line.

3. based on the slanted Baotou line, the slanting Baotou template and the middle side template are taken out. The template includes the inner and outer ankle templates, showing a curved surface.

4., the slanting Baotou template and the middle side model are divided into two parts, the inner and outer ankle, which are divided into the inner and outer ankle.

5. merge the inner and outer ankle Baotou patterns after the curved ends, and trim the slanted Baotou line to make it round and smooth, that is, the slanting Baotou model.

Similarly, the model of the medial and lateral malleolus should be combined and the slanted Baotou line should be trimmed so as to make the model fit.

It is more convenient to sample when the whole paper is applied.

When the koji is processed, the internal and external malleolus can be separated and processed separately or separately.

Four leaning door type leather shoes (1) half post method 1. post last, according to leather shoes style, first draw the line of the lateral malleolus.

2. starting from the location of the mouth length, draw the outline of the medial malleolus at the last surface of the ankle.

3. when sampling, the internal and external malleolus samples were first taken out, and the differential treatment of the stilts and the internal and external malleolus was performed.

Then, the inner and outer ankle patterns are combined to complete the contour of the door to make it round.

You can get the model you need.

4. the sample of the false cover and the method of sample processing are the same as before.

(two) the local full sticking method 1. uses the tattoo paper to paste the last part: the first half of the last surface is pasted on the last, so that the beautiful paper passes around the back line of the shoe last, and attaches all the inside and outside ankle surfaces to the back of the door.

2. use the kraft paper to paste the last: first put the outer ankle surface.

Then use a rectangular piece of paper to paste the front part of the last part to the inner ankle door. It is required that the paper should be firmly attached to the last ankle.

3. draw the outline of the medial malleolus door and the contour of the false cover on the beautiful paper or kraft paper affixed to the medial malleolus.

In comparison, the half door type leather shoes are better with semi stick method.

Because the asymmetrical parts of the gate can be treated as a difference between the inside and outside the ankle.