Identification And Maintenance Methods Of Leather Seats For Automobiles

Identification and maintenance methods of leather seats for automobiles

Because the automobile special leather must be treated by ultraviolet radiation, heat resistance, light resistance, wear resistance and so on, the cost is higher. Therefore, some illegal manufacturers will recharge the cheap leather with other uses, and consumers have to pay more attention to it. The following is professional discrimination. Automobile leather We hope to help readers choose high-quality leather chairs:

1. The label method: the leather of the factory, the back will mark the date of manufacture, the name and area of the leather factory, etc.

2, olfactory method: good leather, after processing, it should not have pungent taste, so too much solvent smell and coating smell are not good.

3. Internal examination: cross cutting leather with razor blades. The color of leather from outer layer to inner layer must be consistent (black appearance and deep grey inside). Pay attention to whether there is a color difference below the surface layer, so that you can avoid buying two degrees of second-hand leather dyed or modified.

4. Viewing method: under the magnifying glass of 30 times, we can see that the appearance of leather is like the surface of the moon, the pit and hole, and its permeability is good. Automobile leather needs special treatment, such as wear resistance, light resistance and so on.

5, wipe the method: wipe the leather surface with stains oil, pay attention to whether there is fading and falling off phenomenon, can avoid buying 2 times to change the color leather.

6, heat resistant method: it is best to ask the manufacturer for a small piece of leather, and use the cigarette head to touch the sample for 2~3 seconds to avoid buying PU products.

7, the certificate Law: the leather of the factory is clear, and the basic data of the production site, leather factory logo, leather test table, and leather authorization book are indispensable. Because Taiwan is the source of large quantities of production of the special leather for shoe upper, how to buy genuine products should be visited and compared.

8, friction method: the real world level leather must be treated with special surface. Leather factory should provide leather test qualification report for understanding quality. The qualified books include dry friction and wet friction times, heat resistance and light resistance index. If a business fails to provide reference documents, consumers will need to know their own judgement or ask for 10 centimeters of square leather to go home and polish it well.

9, the origin Law: all countries in the world are producing leather, but only Europe (Scandinavian, Italy, Austria, Germany and other places) leather industry has a long history, naturally its leather level will be higher than that of Southeast Asia.

10, guarantee law: This is the easiest way to buy. leather chair Do not forget to ask the store if there is a guarantee card, so as to avoid buying inferior leather, second, to develop regular maintenance habits, and then to provide permanent after-sales service.

If your car leather chair meets the above conditions, it must be very valuable, but when consumers buy leather chairs, they must take the warranty card without consideration, and do not listen to the oral guarantee. Because the inferior leather will be abnormal in a short time, and can get a quality assurance card for about a year, the consumer's rights will not be damaged.

Automobile leather maintenance methods

　　 Genuine leather Daily contact with the human body, so the greatest harm to the dermis is the body's grease. There are also some other damage from the outside world, and also a great hazard to the leather cushion. If it is not maintained for a long time, it will cause the cortex to harden and become dirty. The final result is cracking.

If a new car is equipped with a leather chair or a newly refitted leather chair, it is best to add a layer of protective wax to the leather chair for the next fifteen days to facilitate the owners to take care of them. In order to keep the leather bright and fresh all year round, it is better to give skin chairs every month.

As far as possible, the car leather chair should be two feet away from the heat source. If the heat source is too near, the leather will crack. Try not to expose yourself to the sun for a long time, so that the leather will fade. In addition, do not use hair dryer to dry leather quickly after cleaning.

Many cars on the high end cars are packed or made of leather, such as steering wheel and seat. When cleaning these leather products, you can first wipe off the dirt on the leather with a damp cloth. If the dirt is heavy, use a sponge with a thin detergent to wipe it. However, the leather should not be too wet to wipe away the water from the joint. Scrub with detergent, dry it with a piece of dry soft cloth or towel, then open the door, let the air circulate, thoroughly dry the moisture on the leather. When necessary, leather protective agents such as leather polish, liquid shoe polish and so on can be used to wipe up the leather that is about to dry.