Changing Rules And Processing Methods Of Trousers Design Process Board

Changing rules and processing methods of trousers design process board

Various Trousers type board It is far from enough to design the chest shape (formula method). The size of the parts is always under the control of the hip size. We must pay attention to the working environment, clothing habits, age and occupation characteristics of these groups when making board. Only in this way can we properly add the relaxation part, and design and make the board.

When the difference between hip circumference and waist circumference is too large or less than 20cm-27cm, it gives the planner and pusher the difficulty of making boards and pushing boards. Too big or too small hip waist difference, on the basis of the prototype pants type how to deal with the provincial road, sleepy potential, rear crotch slope is the key to solve these difficulties. It is not possible to apply prototyping to all kinds of trousers. The criterion of board planner should be due to human and type. The industry knows that the key to trousers is to solve the difference between the hip and waistline. Dart is the best bridge to solve this difference. Stereoscopic boards and plane boards are inseparable from provincial roads. Correctly using dart and dealing with the relationship between buttocks and waistlines is the key to clothing design and board making. The role of the special pants type dart is particularly important. There are great differences in the shape of provinces, the length of provincial roads and the number of provincial roads.

The curve camber in the process of trousers making is suitable for the requirement of human body curve. And the difficulty is the important step to embody this factor. The change of difficulty is the change of clothing modeling. The change of all trousers is also a change of sleepy potential. The key to solve the relationship between hip girth and waist circumference is to grasp the size of the difficulty correctly. If the waist is too large and the side seam is trapped, the film must be enlarged. If the waist is too small, the slit will remain trapped. The planner must correctly grasp the potential curve of the prototype because the prototype is the foundation. The shape of the special body is shaped by the prototype. Good sleepy rule can be used to solve the buttocks and waist relationship, and the plate type (trousers type) can be fitted and comfortable.

Every garment planner and pusher must know the crotch angle of the rear crotch. Trousers Design The importance of making board. The same type of plate and finished product size why some trousers are squatting down. Even sitting on a chair is uncomfortable. The rear hips feel tight and can't be active. The direct reason for this result is that the crotch slope is not enough, and there is no pulling force of skew yarn. The rear crotch slope of all trousers is the same (big crotch, the angle between the Longmen width and the crotch diagonal line must be between 98-100 degrees). Only in this way can we ensure the sitting posture of the human body and the activity of squat posture. The importance of the rear crotch slope can not be ignored.

The front abdomen (large and small) and the rear buttock (large and small) are the characteristics of men's trousers and trousers (type V). The characteristics of women's trousers and trousers (type A) are large hip girth and small waist. It is a good planner to use these correctly in the design of trousers type boards and solve the easily occurring defects. The number of front abdominal circumference is less, and the number of rear hip circumference is increased. It is necessary to be good at observing the characteristics of the front and rear buttocks. The former plus and the latter must be arranged reasonably.

The determination of the height of the crotch is not stereotyped. The method of calculating the crotch height of the prototype trousers should not be applied to all kinds of trousers. The front crotch should be reduced, and the rear pieces should be warped. The addition of the subtraction to the 2.5cm prototype should be on the warp. This is the law of the change of the trouser type crotch. It can not reduce the number of the front pieces, and the 2.5cm will not be increased after the last piece. Otherwise, this type of plate will be contrary to the laws of human activities.

Archetype: any one Hipline The difference between the number of waistlines corresponding to the number of hips and the number of waistlines at 20cm-27cm is the basic pants type (prototype) of the hips. All kinds of trousers are changed from the prototype pants type, the loose parts are added and placed; the size of the sleepy potential; the angle of the rear crotch slope; the addition of the front and rear buttocks; the determination of the height of the crotch; the determination of the spanlation of the knee line and the determination of the size of the parts are inseparable from the foundation of the prototype trousers, which is the change of all kinds of trousers, including special trousers.