Encyclopedic Knowledge Of Mucilage

　　 Mucilage They can be classified into common mucilages and special mucilages. Common mortar is only used for general printing. It does not require special results. It can be divided into transparent paste, white glue, color printing paste and glossy paste.

Transparent paste printed on cloth It can also increase gloss and elasticity, but the covering power is poor. But the white glue paste itself is white, which can be used in white printing. Its hiding power is strong, so the white glue slurry has high content of titanium dioxide and therefore its firmness is poor. Therefore, the combination of the two is that 30% or so white paste and 70% transparent paste can be applied to the color printing of dark cloth, that is, the color printing paste, which can reduce the dosage of color paste, and achieve good color saturation and color covering power. It is transparent and has no hiding power, so it is only suitable for light color cloth printing. Its advantage is that its resin content is high, so its fastness is better than that of white glue. It can not only improve firmly with white glue. (Ying Ji net printing equipment Co., Ltd.)

According to the different fabrics, the mortar is divided into ordinary glue, swimsuit glue, nylon glue, waterproof nylon glue, denim glue and so on.

According to the requirements of environmental protection, they are divided into environmental protection glue and non environmental protection glue.

They are divided into glossy gloss glue, matte glue and so on.

According to the printing effect, it can be divided into: ordinary printing, foaming printing, fluffy printing, flocking printing, bronzing. printing Three dimensional bronzing printing, flash printing, rotten cotton printing, rotten polyester printing, cracking printing, split printing, denim discharge printing, knitted discharge printing, glass bead printing, rubber bead printing, etc.

As a user, you must know how to evaluate whether the glue you use is valuable.

(1) the most important thing is the firmness of the glue.

(2) environmental protection

(3) mortar elasticity;

(4) whether the glue surface will be bonded (i.e., reverse viscosity and plugging);

(5) mortar brightness;

(6) mucilage covering power;

(7) Softness of mortar According to the above seven conditions, the poorer the front condition is, the lower the value of the mortar is. Therefore, we must use the above seven conditions to evaluate the value of the mucilage.