Problems Needing Attention In Processing Cotton Lint

Cotton lint is a very large fiber resource. It is widely used in national defense, chemical fiber, textile, papermaking, health and other industries. Therefore, the processing of cotton lint is very important. How to improve the level of cotton lint processing? Cotton lint Attention should be paid to the following aspects in processing.

　　 First, enhance ideological understanding and strengthen skills training.

At present, most cotton processing plants have not only the ginning workshop but also the velvet workshop, which fully illustrates the important role of peeling in the processing plant. Because cotton processing is seasonal processing, some operators are temporary workers, sometimes changing frequently, resulting in the overall operator's level of good and bad. Therefore, it is necessary to strengthen the skill training for operators. However, a few operators think that the technology of stripping and blocking trucks is not enough. Actually, this is not the case. The society has division of labor, three hundred and sixty lines, and rows of scholars. As long as we raise awareness and correct attitude, we can learn technology and make good achievements in our work.

　　 Two. Meticulous operation and careful maintenance of equipment

In the process, the operator should achieve:

1. nasal news: a smell of fiber burning; two smell of rubber with friction.

Listen to 2. ears: listen carefully for any abnormal sound in the parts of the equipment during operation.

3. eyes should be observed: observe whether the density of cottonseed rolls in the working box of each peeling machine is moderate, so that seeds can not be overflowed without empty cars. To observe whether the hairs of cotton seeds were discharged by each time peeling machine were consistent. Velvet machine Try to achieve the same degree of sawtooth sharpness, consistency of cottonseed coils and uniform spacing. When it is found that the sharpness of the sawtooth in the same level is not consistent, the density of the cotton seed roll should be reduced and the amount of seed discharge should be increased for the saw sharpening machine. The density of the cottonseed coils should be increased and the seed discharge should be increased. This will enable the two cotton peeling machine to maintain a basic balance after scraping. Avoid the inconsistency of light hairs after the discharge of cottonseed and the inconsistency between the length of the cotton lint and the size of the cotton lint.

4. troubleshooting in time: during the operation of the equipment, the problem can be stopped without any violation of the operating rules, so as to avoid minor failures and cause a major accident.

　　 Three, strengthen the inspection of cotton lint.

According to the current regulations of the state, cotton lint is divided into three categories, and each class is divided into three grades, that is, three grades and nine grades. Because different lengths of short pile have different uses, they must be stripped down, stripped and classified, and packaged. At present, most cottonseeds are also allocated according to the standard in the processing plant, and the production principle of "first road light stripping", "two ways more stripping" and "three ways of striving for stripping" are implemented. However, some cotton processing factories only have sensory and visual inspection on the processed cotton lint, and do not have quantitative detection means, which is not conducive to the development of the industry. Therefore, strengthening the inspection of cotton lint is very necessary.

　　 Four, improve the processing technology of cotton lint.

Due to the particularity of cotton lint fiber, the operating environment of the velvet shop is relatively poor, flying fleece and dust are more, which seriously affects the operator's physical and mental health. Therefore, for the backward processing factories, we should do the following: first, add dust removal devices to the top of the flannel and the seed plate; secondly, the pile up platform does not pile up cotton lint and the down machine. machining The cotton lint down will go directly into the respective pile out boxes or their own storage room, and then be conveyed to the baler by the velvet machine. This will avoid the phenomenon of flying around around the platform. Finally, the dust removal facilities in the production process must be improved so as to improve the operation environment.