Hand Sewing Shoes May Be A Good Choice.

< p > if it is only the way to distinguish "a href=" http://www.91se91.com/news/index_x.asp "> hand sewing shoes > /a", it is the most convenient and advantageous. The hand sewing shoes can be divided into: vertical hand stitching, ordinary hand sewn folding hand sewing (also known as double row hole hand sewing) and so on, and hand sewing shoes have the following advantages: < /p >

"P > environmental protection does not use glue (or very few). This may be the biggest advantage. Now the developed countries in Europe and the United States have strict environmental protection tests on their imports. Their nationals and policies have strong environmental awareness and requirements. Environmental protection is a must for all kinds of products in different industries! < /p >

< p > no use of glue. Of course, there will be no crack in the open end of the big bottom. With hand sewing a href= "http://www.91se91.com/news/index_x.asp" > structure > /a > with the rubber outsole with strong abrasion resistance, it can almost completely avoid gluing. In this way, those who use glue can not compare with glue or water. If the ambient temperature exceeds 55 degrees (the streets are completely exposed to sunlight in summer or some special working conditions), it will be possible to open glue, and wearing hand sewn shoes is no problem.

< /p >

< p > the shoes that use glue will also be afraid of water. If it is Guangdong high temperature and more rain, there will be more problems. The rain will stay in the very tiny glue crack for a long time, which will make the glue area larger and larger.

There is no such problem as hand a href= "http://www.91se91.com/news/index_x.asp" > seam shoes < /a > if some water flows into the shoes through pinholes, it will only dry with slight sunlight and will not affect the wearing and life of shoes.

< /p >

< p > manufacturers do not need to check glue adherence frequently in mass production. If there is a problem with glue, the production line should be suspended and adjusted in time. The QC of customer will monitor the production of the order according to a certain proportion to make the glue stick test for the finished shoes, which will consume a lot of manpower and material resources.

Hand sewing shoes can completely eliminate these undesirable jobs.

< /p >

< p > the practice of sewing shoes on a large scale production process is much simpler than other methods. Only a comparison is made between the semi-finished products and the process of adding sulphur into the bottom. < /p >

< p > use glue shoes: climbing method; brush glue - nail middle bottom - steamed soft upper - pliers and pliers - pull the waist - sweep the back - help the feet to rough - fill the belly - draw the bottom line - rough - press the bottom - Press - add sulfur tank.

There is a need for pliers, roughing machines, rear help machines, shoe steaming machines, etc.

< /p >

< p > hand sewing shoes: lightly brush at the seams of the outsole and upper vamp -- sew the bottom and the upper part of the shoe according to the arrangement of the hand - Kong Fenghe steamed soft upper - finishing - into the sulfur tank.

It only needs the steaming machine to complete the shoe.

< /p >

< p > glue less than a href= "http://www.91se91.com/news/index_x.asp" > shoes < /a > requires assembly line and many machines and equipment to occupy larger venues, while hand sewing shoes require only a needle and thread of wax.

< /p >