Professional Clothing Should Be Used As Fine Needles As Possible When Sewing.

< p > when the direction of sewing is parallel to the meridional direction of these < a href= "http://admin.sjfzxm.com/admin/admin.htm" > professional wear > /a >, the embedded stitches will force the warp to be in place, because the warp is pushed away by every stitch, and the deviation produced by the accumulation of multiple needles will shrink along the seam of the joint so that the seams will wrinkle. When sewing direction is parallel to the weft direction of these professional fabrics, it usually wrinkles less.

According to experience, the diagonal joints in diagonal corners will not wrinkle. Most of the professional fabrics will be enough to avoid wrinkling if the joints are at the angle of 15 degrees in longitude or latitude.

Therefore, the oblique cutting operation can be considered.

If necessary, apply smoothing agent to the fabric of professional wear.

< /p >

< p > in addition, fine needles should be used as far as possible.

< /p >

< p > fine needles can significantly reduce the resistance generated when passing through the fabric of professional wear, so it has the effect of preventing wrinkle and wrinkle. At the same time, we should pay attention to changing new needles frequently.

< /p >

< p > when the synthetic sewing thread is used, the tension of the suture must be carefully determined and the tension should be adjusted to a minimum.

The bottom line tension must be adjusted to: when the end of the seam moves freely, the bottom spindle spindle and the outer sleeve slowly slide down, and the tension between the surface line and the bottom line must be kept consistent, so that they interweave exactly between the two layers of professional clothing.

The sewing thread is sewn into < a href= "http://admin.sjfzxm.com/admin/admin.htm >" /a ". The tension of the fabric will be too large. It will automatically shrink to ease the tension, which will shrink the cloth along the seam and make the joint wrinkle.

< /p >

< p > we should also pay attention to the friction between the upper garment and the presser, which will also force the lower part of the cloth to move faster and cause the seam to crease.

As long as the pressure of the presser foot is lowered as much as possible, and the use of fine teeth to deliver the teeth (conveyor), the speed of sewing machine can be reduced to avoid the wrinkling caused by feeding. The basic way to solve this problem is to use a sewing machine with differential feeding or needle feeding mechanism.

How to reduce wrinkle in sewing seam of fabric.

< /p >

"P >", as an important part of the industry of "a target=" "_blank" "href=" "http://www.91se91.com/" > clothing < /a >, more and more attention has been paid by the society, and its application in the industry is becoming more and more widely. It is a kind of expression of self advocating, representing a silent language.

< /p >

< p > at present, including China, we have developed a relatively complete "a href=" http://www.91se91.com/news/index_f.asp "professional dress < /a > standard system, covering the requirements, size, safety and environmental protection. In the design, we are also developing towards nationalization, timing and individualization, and emphasize the harmony and unity of war.

This also confirms the progress of society and the advancement of science and technology.

< /p >