Second Half Of The Synthetic Leather Industry To Catch The Market And Catch The Market

From the Hongkong Asia Pacific Leather Exhibition in March to the Guangzhou leather exhibition in May, we can easily find that high gloss glossy leather and brilliant crystal synthetic leather and even PVC's crystal leather occupy the whole leather market. From all the fashion information, we also see that high gloss, bright handbags, clothing and shoes are the trend of the second half of this year or even next year.

Based on the characteristics and application of high gloss high brightness material, this article provides technical support for synthetic leather enterprises, and provides help for developing products without taking detours and keeping up with the trend of fashion.

In fact, the product of bright surface has a long history. The previous mirror leather has always been a hot selling product, especially in the second half of last year, due to the selling of mirror products in the market, the supply of mirror paper is in short supply.

In order to get products that are more bright than mirrors, the surface brightness of synthetic leather is improved by using two mirror technology and mixing bright pearl powder or metallic gold powder and aluminum silver paste in the material.

However, the development and application of materials such as moisture curing and oil skin make it possible to produce brighter and more crystalline leather.

1. Wet steam curing wet cured resin is a moisture curable material that has been produced in the market in the second half of last year, and has been widely applied.

The general application is as follows: 1, process: spraying or roller coating.

Ratio: moisture curing resin 100g butyl ester 50g fast drying agent 0.1-0.5g defoamer 0.2g leveling agent 0.1g dye water 10g operation process: wet semi-finished product veneer or color change - (printing) - embossing - spraying or roller coating (coated 100g/m) - put on the shelf in a dust-free environment, humidity 80%, temperature 20-30 C. Place 6 - 8 hours - winding packaging.

Product characteristics: strong crystal sense, bright and pparent color.

At the beginning of the 2. varieties, the products produced by wet steam curing were confined to PU's luggage leather. However, with the development of new materials, a series of wet cured materials have been applied.

Soft wet curing materials for soft synthetic leather development, low modulus, good adhesion.

It can be applied to elastic luggage leather and bright garment leather.

The cold and moisture resistant curing material is designed for leather synthetic leather, and its folding resistance reaches more than 20000 times at -15.

It can be widely used in the production of shoe leather.

Yellowing resistant wet steam curing material is applied to the yellowing leather for yellowing and so on. The Yellow resistance can reach four grade.

The oil felt wax moisture curing technology can give moisture to various surface tactility, and provide various high gloss and high gloss crystal products for bags, shoes, clothing and decorative leather.

3.PVC wet steam curing because PVC artificial leather is made of PVC resin and DOP plasticizer, so the surface of PVC semi-finished products often has the precipitation of DOP, which brings difficulties to the combination of moisture curing agent and PVC.

A 3% DOP anti leakage agent is developed in a wet steam curing material to effectively prevent the precipitation of DOP and prevent the occurrence of oil spots.

The crystal PVC leather produced is dazzling, creating a new step for upgrading the product level of PVC factory.

The synthetic leather produced by wet steam curing process is completed in a dry process. It requires not only a large dust-free workshop, but also slow production process and high cost.

Because there are no such conditions in some factories, it is difficult to produce this kind of high brightness products. Therefore, the production of moisture proof steam curing materials becomes necessary.

Two. The oil dampproof steam curing material is also known as the oil skin material, which simplifies the drying process of wet steam curing. The material is mixed with butyl ester and dye water, and can be rolled and sprayed and dried directly after drying. The crystal effect is basically close to that of wet steam curing products.

Because the surface is covered with a touch of oil and oil, it is called oil skin.

Because the production of oil skin is convenient and simple, it is widely used at present. It not only occupies a part of the wet steam curing on the luggage leather, but also plays a leading role in shoe leather.

And the trend of development will continue until next year or even further.

There are many kinds of oil skin materials, including the raw materials of nitrocellulose and polyurethane.

Different materials are selected according to different product types and requirements.

The general luggage leather requires brightness and plastic feeling, and the surface has non stick oil feeling. Therefore, most of them choose nitrocellulose material, and the shoe leather requires better physical properties and oil feeling, so generally choose polyurethane oil skin.

There are also two components of the oil material. The two components are mixed and rolled or sprayed by three to one ratio before use. The products are pparent and strong in crystal sense.

The advantages of waterborne polyurethane such as high brightness oil skin and good environmental protection have become a highlight of oil skin.

In the future, oil skin materials are not only widely used in luggage leather and shoe leather, but also widely used in garment leather, furniture leather and decorative leather.

Three, polishing and polishing technology has been widely applied to the production of synthetic leather. The principle is to make the surface of the foggy surface become oily and bright by grinding, adding the sense of level and leather of the pattern.

The general process is: wet semi-finished veneer - embossing - printing and polishing agent - drying and rolling - polishing machine polishing - rubbing - check.

The shoe leather and garment leather produced by the polishing process appear to be of a sense of hierarchy, and after rubbing and finishing, the top of the pattern is rubbed and brighter, showing the natural essence.

Recently, another new material is water rubbing and polishing material, which provides a new direction for garment leather and shoe leather in the second half of the year.

Process: wet semi-finished veneer (or embossing) - printing special treatment agent - drying - water rubbing - rubbing dry - inspection.

Four, the wash water wash garment leather has always been popular, but the washed garment leather surface is foggy, giving people a feeling of old and old.

According to market demand, this year should also conform to all outstanding and bright trends.

The water washing material on the bright side has been affirmed by several large companies.

The basic steps are: bright surface washing materials, waterborne organic brown pulp, deionized water, mixing with 5:1:1, 80 mesh printing, drying (3 minutes, 130 degrees), and then through the shrink machine for pretreatment, drying and rolling. The effect of the product is that the product made from this bright surface water washing material is especially bright and smooth at the top, and there is an excellent sense of hierarchy at the bottom of the pattern, which is full of fashionable and bright style.

Five. The high brightness coating is made of nylon cloth and other garment fabrics, and directly coated with high solid and bright resin on the direct coating machine. The high brightness coating material produced has unexpected effect this year.

Most of the previous coatings were acrylic coatings. Due to environmental protection and other factors, acrylic coatings gradually decreased, while ordinary PU coatings did not meet the requirements of high gloss and high gloss.

The process of highlighting coating agents is the same as that of ordinary PU coatings. The two materials are used together because of the soft touch of the coating and the higher modulus of the coating is to prevent adhesion of the coating, and at the same time to improve the brightness of the coating.

Therefore, according to different requirements, the appropriate ratio is allocated, and the general proportion of the two is the former: the latter =1:2.

In the production process, we should pay attention to adequate drying, and the air volume and temperature of oven can be raised appropriately, otherwise, indentation and wrinkle will easily occur.

At present, the new materials mentioned above are relatively mature and have been applied in synthetic leather enterprises.