Elimination Of Backwardness Brings Opportunities For The Development Of Textile Machinery Industry

< p > with the continuous deepening and intensification of national energy conservation and emission reduction work, < a href= "http://www.91se91.com/news/index_c.asp" > printing and dyeing enterprise < /a > put forward higher requirements for textile machinery products.

In August 26th, the website of the Ministry of industry and information released the list of enterprises to eliminate backward production capacity in the industrial sector in 2013 (the second batch), just one month after the last announcement of the list of the first batch of industrial enterprises to eliminate backward production capacity.

According to the news, the list of the last batch, the third batch of enterprises to eliminate backward production capacity, will be announced by the end of September. The scope of elimination is still the same as the first batch of industrial enterprises involving 19 industries.

< /p >

< p > from the current information, two batches of the three batch of backward production capacity list are related to printing and dyeing enterprises this year.

In a sense, printing and dyeing enterprises eliminate backward production capacity, in essence, eliminate backward printing and dyeing equipment.

Many industry insiders say that the elimination of backward production capacity to the printing and dyeing equipment manufacturers will surely bring more benefits than disadvantages.

< /p >

< p > < strong > eliminating backward production capacity of printing and dyeing is not due to overcapacity < /strong > < /p >

< p > < a target= "_blank" href= "http://www.91se91.com/" > textile > /a > there are many branches in the field. However, the list of printing and dyeing enterprises has only appeared on the list of eliminating backward production capacity, which is mainly related to the higher emission of pollutants in the printing and dyeing industry.

It is pointed out that most of the pollution in the textile industry comes from the printing and dyeing industry.

Printing and dyeing not only produce waste water, waste gas, waste energy, but also cause great damage to the environment.

< /p >

< p > at present, China's < a href= "http://www.91se91.com/news/" > printing and dyeing enterprise < /a > mostly distributes in the eastern coastal area with large population density, located near the city or city, and becomes one of the important sources of pollution in the urban environment.

It is for this reason that the printing and dyeing enterprises near the lake have basically ceased production.

For example, the printing and dyeing factories near Wuxi have almost been shut down. The enterprises near the sea have relatively little influence on the residents' lives, so the overall situation is better. For example, the printing and dyeing enterprises in Shishi, Shaoxing, Xiaoshan and other areas are still relatively large in capacity.

< /p >

< p > although there is a relative surplus in the capacity of the industry, the elimination of backward production capacity is not due to the overcapacity of the industry.

Li Yi, director of the standard quality department of the China Textile machinery and equipment industry association, said that the equipment "N" headed by the obsolete catalogue was basically an old type wool dyeing equipment manufactured in the 70s of last century. Some 140 and 160 types of equipment were manufactured over 30 years.

Since the 90s of last century, there has been no production of the 160 type equipment in China, and below LMH-160 are very old equipment.

Most of these equipments are driven by DC motors, which have the disadvantages of long process route, high energy consumption, high water consumption, low efficiency and poor sealing performance.

At the same time, these devices are generally narrow in width and cast iron frame, and their quality stability is poor, and their adaptability is not strong.

Therefore, these devices appear in the elimination of backward production capacity list is also reasonable.

< /p >

< p > < strong > speed up equipment upgrading, < a href= > http://www.91se91.com > spinning machine market < /a > opportunities increase < /strong > /p >

< p > the hammer of printing and dyeing industry to eliminate backward production capacity has been knocked down in the "a href=" http://www.91se91.com "printing and dyeing enterprise < /a >, but the object of the real demolition is still some long time dyeing and printing equipment. Whether the elimination of backward production capacity to the textile machinery industry brings more advantages than disadvantages or disadvantages outweigh the advantages? < /p >

< p > Li Yi believes that eliminating backward production capacity actually accelerates the upgrading of enterprise equipment and makes room for new textile machinery equipment.

The old printing and dyeing equipment not only pollutes the environment seriously, but also wastes energy.

For example, the original water washing device not only has no lid, but also has thin wall and feels hot, and the heat loss is serious. After 15 years, the running, running, dropping and leakage of the equipment are more obvious.

If there is no state policy to eliminate backward production capacity, because the equipment can still be used, some enterprises with low quality requirements will not take the initiative to rebuild the equipment or be willing to replace the new equipment.

< /p >

< p > through the practice of eliminating backward production capacity in the past two years, we can see that the new type of domestic energy saving and environmental protection printing and dyeing equipment has been widely applied.

Many textile machinery enterprises also reflect that the current energy-saving and emission reduction equipment sales are good.

This also proves that eliminating backward production capacity is crucial to upgrading the industry.

Li Yi talked about their recent visits to Shishi and other regions, and found that the printing and dyeing equipment of these enterprises had already installed flue gas treatment and waste heat recovery devices, and the printing and dyeing washing machines had basically achieved thermal insulation.

< /p >

< p > elimination of backward production capacity not only made room for domestic high-end printing and dyeing equipment, but also pointed out the direction for the future development of the industry.

Li Yi pointed out that the future development trend and general guiding ideology of textile machinery industry is to meet the requirements of energy saving and emission reduction and conform to the general trend of automation development.

< < a href= "http://www.91se91.com > > < < /a > >" 12th Five-Year "development guiding opinions", it is pointed out that during 12th Five-Year, we will increase the research and development process of printing and dyeing equipment processing parameters on-line detection system, knitted fabric continuous rinse and wash equipment, new wool fabric dyeing and finishing, chemical concentration on-line detection and distribution system, heat energy real-time monitoring system of shaping machine, printing and dyeing on-line wastewater filtration and purification and reuse system and other new equipment.

< /p >

< p > < strong > elimination period is reasonable and equipment is difficult to fundamentally control pollution < /strong > < /p >

< p > on the list of the first batch of enterprises to eliminate backward production capacity, we can see that most of the eliminated equipment has been fixed for more than 15 years.

In explaining this time limit, Li Yi regularly stated that the continuous use of less than 15 years' a href= "http://www.91se91.com" > printing and dyeing equipment < /a > basically reached the stage of elimination.

Although this country has eliminated backward production capacity, it is possible to cut out a number of equipment which is earlier but with shorter service life. But this is not the mainstream.

From the general trend, the elimination of backward production capacity is right.

Because there is no government intervention in management, pollution problem is basically no enterprise will care, solve the problem is even more impossible.

< /p >

< p > Li Yi introduced that most of the equipment that needed to be eliminated on the list of the first batch of backward production capacity has been shut down, but it can not be said that all the equipment eliminated from the market disappeared in the market.

In the future, due to the existence of various market demands, various types of equipment will still exist for a period of time.

For example, some of the wool dyed equipment with the word "N" may still be produced by manufacturers.

These old equipment is mainly used for the production of low-grade products, because the production of these products can not be profitable with imported equipment from Italy, and there is still market demand for this old type of equipment.

< /p >

< p > it should be said that at present, eliminating backward production capacity has achieved certain results.

But Li Yi also pointed out that the printing and dyeing industry eliminated backward production capacity. At present, the problem of hardware is symbolically solved from the equipment level, but the concept of large textile and large printing and dyeing must be realized in order to achieve energy-saving and emission reduction in the industry.

For example, if the bath dyeing equipment is less than 1: 10 (that is to say, 1 kilograms of fabric should use 10 kilograms of water), during the use process, because of many uncertainties, the dyeing process does not necessarily follow the ratio of 1 to 10. If the ratio of 1 to 10 is not good, then the re dyeing will be 1 to 20 bath ratio.

In this sense, if the bath ratio of 1 to 15 is used, the dyeing will be successful once, and the bath ratio can also be saved.

Therefore, the equipment can only solve a part of energy saving and emission reduction tasks. In order to achieve the purpose of energy saving, emission reduction and pollution control, combined with factors such as fiber, dyestuff, auxiliaries, artificial operation and so on, it is necessary to use large textile concept to solve problems from raw cotton blending, fabric sizing, < a href= "http:// www.91se91.com" > printing and dyeing process < /a > and so on.

< /p >