Standardization Of Tannery Industry, Implementation Of Small Business Or Merger

< p > June 1st, the tannery enterprises newly built or expanded and the annual processing capacity of finished leather enterprises should not be less than 300 thousand standard.

The existing tannery enterprises should also meet the requirements of industrial policies, and encourage small and medium-sized enterprises that do not meet the requirements to merge and reorganize in accordance with the relevant laws and regulations of the state. After the merger and reorganization, the scale of production should reach this requirement.

This is a requirement put forward by the Ministry of industry and the Ministry of industry on the specification of leather industry in the scale of enterprise production, which was formally implemented in June 1st.

< /p >

< p > "specifications for leather industry". All new construction or renovation and tannery enterprises in China (except Taiwan, Hongkong and Macao) are regulated from 6 aspects of enterprise layout, enterprise scale, technology and equipment, environmental protection, occupational safety and health, supervision and management, but not fur processing enterprises.

< /p >

< p > in the layout of enterprises, leather manufacturing enterprises that require new construction or renovation and expansion must comply with national laws and regulations, industrial policies and industry development plans, comply with the general land use planning, land supply policies and land use standards, and strictly implement the environmental impact assessment system.

Tanning enterprises shall not be established within the environmental sensitive areas such as nature reserves, scenic spots, drinking water source protection areas, cultural protection areas, and the protected areas of cultivated land and basic farmland determined by the general land use plan.

At the same time, tannery enterprises should be encouraged to concentrate production and concentrate on pollution control. In the tannery Park, centralized sewage treatment facilities should be constructed to collect and centrally treat the sewage of enterprises in the park and discharge them steadily.

< /p >

< p > in terms of process technology and equipment, the specification requires enterprises to use solid salt to treat the raw leather. The raw material should be used to shake the salt before rotating the raw material before the water is soaked, and the waste salt can be recycled or separately standardized to reduce the salt entering the < A href= "http:// www.91se91.com/news/index_c.asp" > tannery wastewater < /a >

At the same time, tannery enterprises are required to adopt water soaking technology, such as soaking water as the core, to reduce water consumption and displacement.

< /p >

< p > in the production process, enterprises should also adopt various cleaner production technologies to reduce the production of COD, ammonia nitrogen, volatile organic compounds, chloride and trivalent chromium.

Specification conditions show that enterprises will be encouraged to use automation equipment to upgrade the automation level of leather industry, and encourage the use of chromium rich sludge and chrome containing leather scrap recycling technology.

< /p >

< p > < < a href= > http://www.91se91.com/news/index_c.asp > tannery > < /a > standard conditions. In the aspect of environmental protection, enterprises are required to carry out environmental impact assessment and environmental protection acceptance system of construction projects according to law, and strictly implement pollutant discharge declaration, pollutant discharge payment and discharge permit system.

This specification also stipulates the discharge of major pollutants, and requires total control indicators. It also requires the establishment of emission monitoring files and quality management of self testing.

The specification also requires that the general industrial solid waste and hazardous waste be disposed of safely, and the treatment and disposal methods should be consistent with the requirements of environmental impact assessment and completion acceptance.

< /p >

< p > > a href= "http://www.91se91.com/news/index_c.asp" > environmental protection facilities < /a > complete, pollution control facilities and automatic online monitoring facilities operate normally and effectively, and sound environmental management system and environmental risk plan can be effectively implemented.

In terms of prevention and control of heavy metal chromium pollution, it is required that the treatment process of chromium containing waste water is reasonable and the facilities are complete.

< /p >

< p > in addition, the specification requirements for occupational safety and health require enterprises to comply with the requirements of relevant laws and standards, have corresponding occupational safety and health conditions and fire safety conditions, and establish and improve the management system of safety production, fire safety and occupational disease prevention and control, and implement the responsibility system.

For some designated places, the staff should be required to wear protective respirators and other protective products.

< /p >

< p > in supervision and management, tannery enterprises that require new construction and renovation and expansion conform to the requirements of national laws and regulations, and enterprises should fulfill relevant approval procedures in terms of investment management, land supply, energy conservation assessment and environmental impact assessment.

Construction projects and projects that fail to pass the environmental protection examination and approval without the approval of the environmental impact assessment and the projects that do not have the conditions for safe production will be stopped construction and production.

< /p >