The Jiangsu Provincial Market Supervision And Administration Bureau Sampled The Casual Wear Rate Of 65.1%.

In January 4th, the official website of Jiangsu provincial market supervision and Administration Bureau released the results of the first phase sampling inspection of textiles and clothing commodities in the field of commodity circulation in the first phase of circulation in 2018.

Among them, from May 2018 to July, the Jiangsu provincial market supervision authority (formerly the provincial commerce and Industry Bureau) carried out quality checks on the casual wear commodities in the circulation sector in some parts of the province.

The scope of work covers Huaian, Lianyungang, Yangzhou, Yancheng City, Shuyang, Taixing, Wuxi, Xuzhou, Taizhou, Zhenjiang, Zhenjiang, city and market.

More than 240 brands including scarecrow, Herman, and colorful deer were selected for 495 batches, and 322 batches were tested. The pass rate was 65.1%.

There were 495 batches of casual clothing samples, of which 173 were not qualified.

The following are analyzed by item:

1. Safety items

(1) decomposable carcinogenic aromatic amine dyes.

According to GB18401-2010 "basic safety technical specification for national textile products", textile products are prohibited from decomposing carcinogenic aromatic amine dyes.

A total of 3 batches failed.

The content of decomposable carcinogenic aromatic amine is an important safety index affecting human health. If clothes containing decomposable carcinogenic aromatic amine dyes are exposed to human body for long time, if the dye is absorbed by the skin, it will spread in the human body, which may lead to lesions and induce cancer.

In addition to hurting human health, a large number of pollutants will be discharged during the production of "banned azo dyes", resulting in serious environmental pollution.

(2) formaldehyde content.

According to the standard requirement, 1 batches failed.

After long time use of formaldehyde, the free formaldehyde can be accumulated slowly after inhaling the human body, causing respiratory diseases.

If the human body is exposed to formaldehyde for a long time, it will cause dermatitis, itching and even ulceration.

2. Fiber content.

The identification of fiber components of clothing should conform to the standard requirements of GB/T29862-2013 "textile fiber content identification". 132 batches of products in this test do not meet the standard requirements.

(1) the measurement of fiber types is inconsistent with the identification.

For example, some samples are identified: Cotton: 100%, the measured result is cotton: 72.8%, nylon: 27.2%;

(2) fiber names are not standardized. For example, some samples are identified as "silver onion", which is not up to the standard.

(3) fiber content tolerance does not meet the standard requirements. For example, some samples are identified as cotton: 72%, nylon 28%: Cotton: 64.7%, nylon: 35.3%;

Inaccurate labeling of fiber content can not correctly indicate the true material quality of the product, it will mislead consumers, and there is suspicion of adulteration and false truth.

3, color fastness.

Clothing color fastness should meet the basic safety technical requirements and corresponding product standard requirements of GB18401-2010 basic safety technical specification for national textiles.

3 batches of dry color fastness, 5 batches of light fastness, 2 batches of color fastness, color fastness, color fastness, color fastness, dry fastness, color fastness, and wet fastness of batches of 6 batches were unqualified, and 14 batches of wet fastness and color fastness were not qualified.

Unqualified color fastness projects will affect the appearance of clothing, while the dye will also be harmful to human safety.

4. Physics project

(1) seam performance (slip).

The seam performance (crack) should meet the requirements of the corresponding product standard. The results of the 13 batches of the products are not up to the standard requirements.

The failure of the project will lead to slippage in the process of garment wearing and affect the use of garments.

(2) pilling and pilling refers to the role of external forces in the use of textile and apparel products, which is rubbing itself or rubbing itself with other objects, resulting in fibers intertwined to form a hair ball.

A total of 6 batches failed.

The failure of the project will affect the appearance and feel of clothing.

(3) peel strength of the adhesive lining.

The peel strength of the adhesive lining should meet the requirements of the express product standard. After examination, 16 batches of products failed.

The adhesion strength of the adhesive lining is low, and the lining cloth is not firmly adhered, which results in uneven clothing and affects the appearance and performance of the garment.

(4) strength of trousers after crotch joints.

The strength of the post crotch joints should meet the requirements of the corresponding product standards. After inspection, 4 batches of products failed.

The failure of the project will cause the crotch cracking and lighting up during the use of the product, which will affect its performance.

At present, China is already a major producer and consumer of clothing. However, compared with the whole international market, the development of China's garment industry is still very immature.

The main reasons for the failure of garments are:

1. the enterprises did not receive information about the country's clothing standards. They did not pay attention to the relevant national garment production standards, or the understanding and importance of standard requirements were not enough, especially small workshops and small factories.

2, the quality consciousness of enterprises is weak, the management of product quality is not in place, the inspection of raw material quality is neglected, the authenticity of fiber composition and content is not checked, or cheap raw materials are purchased for profit.

The results of this sampling show that there are still some problems such as the high percentage of fiber disqualification, color fastness, pilling and joint performance (such as slippage). Therefore, it is necessary to remind consumers to choose carefully when purchasing.

Consumers should pay attention to the following points when choosing clothes.

1. purchase clothing should check labels and see packaging.

The use instruction (identification) of the product is the necessary information for the production of the product, including the specifications, performance and usage of the product, which is given by the distributor, so as to guide consumers to choose and use reasonably.

This is the responsibility of producers and distributors.

Therefore, the use instructions of products are signs of the quality commitment of producers and distributors, reflecting the quality consciousness and management level of enterprises.

Therefore, consumers can directly see the product instructions to judge the quality of products.

The product instructions can be used in the form of tag, label, package instruction, instruction manual and so on, and can be used together at one or more parts. The contents should be marked as: the manufacturer's name and address, product name, specification, type, fiber composition and content, maintenance method, product standard and basic safety category. The contents of different description forms should be consistent, and the specification, type, material and content of raw materials, and maintenance methods must be durable.

Consumers can first identify the products by checking the product labels, and the product labels of the formal enterprises are complete and clear.

If the content of the logo is incomplete, non - standard, inaccurate, and deliberately exaggerated, it is necessary to buy carefully.

Special attention should be paid to products such as products not identified or marked, but not marked with address of manufacturing enterprises or enterprises, no product specification and ingredient content, no implementation standards, no durability labels, tag labels - durability labels - product packaging is inconsistent and product performance is exaggerated, so it is best not to purchase.

In addition, if the product is rough and unclear, it is not suitable for purchase.

2, find famous products, see manufacturers.

Over the years, the results of spot checks showed that the qualified rate of products, certified products and famous brands of state-owned enterprises, large enterprises and foreign-funded enterprises was relatively high.

This also prompts consumers to try to buy quality guaranteed clothing products, while buying some small brand products needs to be cautious.

3, smell odour, pick flowers and colors.

In textile dyeing and finishing, a variety of finishing agents and auxiliaries are used, such as improper processing and residual chemical composition, which can cause harm to the human body.

In addition to paying attention to the above purchasing skills, consumers can also smell "taste". If the product gives off the smell of stimulation, it is possible to have formaldehyde residue, so it is best not to buy it.

When choosing color, the risk of light fastness exceeding standard is lighter.

4, we must strengthen our awareness of self-protection and rights protection.

Consumer shopping can not be credulous advertising, for goods that do not understand, do not rush to buy.

Shopping must obtain shopping invoices. In case of disputes, they should promptly complain to the consumers' Association, protect their rights and interests by legal means, and jointly supervise and regulate the market.