Today, Large-Scale "Back To Work Tide" Or Will Be Opened! What Should We Pay Attention To After Resuming Labor And Resuming Production?

Since February 10th, domestic provinces and cities are expected to usher in a large-scale return to work, but the new coronavirus pneumonia epidemic is continuing. This year's road to recovery is doomed to be extraordinary.

Affected by the outbreak of the new coronavirus, the start time of the textile and garment industry after the Spring Festival is generally delayed. The major textile cluster markets and textile factories should make policy notice to postpone the resumption of work and start the market.

First, the spinning spinning plant and raw materials market will start operation.

1, cotton yarn factory: large cotton yarn factory is scheduled to start in February 9th (January sixteen), but whether workers can arrive on duty on time is unknown.

2, pure linen (hemp) and hemp blended yarn factory: basically set to start in February 10th (January seventeen).

3, chemical fiber factory: the former large-scale chemical fiber factory did not shut down during the Spring Festival. This year the market is not good. Most factories have stopped some production lines. At present, the earliest factory plans to resume production lines in February 6th (January thirteen). Most of the other factories said they would postpone it.

4. Raw material Market: China's light textile raw material market is located in Qian Qing, Shaoxing. It is the largest distributing center of yarns in China. According to the spirit of the document of the Keqiao district government in February 1st, the opening time of the market in the region should not be earlier than February 17th.

Two, all kinds of fabric weaving factory start up plan

1, chemical fiber gray cloth factory: mainly concentrated in Jiangsu, Wujiang, Shengze and other places, the local government's latest start time requirement is not earlier than February 9th (January sixteen), there is no new news.

2, the conventional cotton fabric factory: mainly concentrated in Shandong, Henan, Hebei and other places, most of the start time requirements are not earlier than February 8th (January fifteen);

3. The weaving base of woven products: it is understood that Shengze is the largest weaving base for weaving products in China. At present, there are about 100 thousand advanced weaving equipment. The General Chamber of Commerce recently issued a proposal to postpone the resumption of work, calling on members of the chamber of Commerce to resume work after February 14th.

4, cotton elastic and cotton polyester interwoven fabric factory: mainly concentrated in Lanxi, Zhejiang, the latest news is that the local government requires enterprises not to start as early as February 10th (January seventeen).

5, pure linen (hemp) and hemp blended weaving and weaving factory: mainly concentrated in Jiangsu, Yixing, Anhui, Tongling and other places (Hubei also has a large number of hemp fabric factories, but the commencement time will be very late). Basically, it is scheduled to start after February 10th (January seventeen).

6, TR casual fabric grey cloth factory: mainly concentrated in Xiaoshao District of Zhejiang, the latest document spirit of the two governments is that the commencement date should not be earlier than February 17th (24 January), depending on the epidemic situation.

7. Knitted fabric factory: Zhejiang Xiaoshao area should be the largest industrial gathering zone of knitted fabric in China. The commencement date should not be earlier than February 17th (24 January), depending on the epidemic situation.

Three, all kinds of dyeing printing plant start up plan

1, Zhejiang, Xiaoshan and Shaoxing gathered most of the dyeing and printing capacity of the country. According to the spirit of the documents of the two governments, the commencement date should not be earlier than February 17th (24 January), depending on the epidemic situation.

2, printing and dyeing enterprises in Jiangsu and other places, the current initial plan is mostly in February 10th (the first month of seventeen).

Four, all kinds of embroidery, coating, composite, water washing, fabric repair and other post processing plant start up plan.

Such factories are also concentrated in the Xiaoshan and Shaoxing areas of Zhejiang. In addition to being restricted by the government regulations, the factories themselves are also small in size and the time for personnel to arrive is late. It is expected that the opening hours will be later than February 17th (24 January).

Five, textile cluster opening plan

1, Keqiao China Light Textile City: the world's largest fabric trade center (including finished fabric market and grey fabric Market) can not start as early as February 17th (24 January), depending on the epidemic situation.

2, China's Eastern Silk Market: it is planned to stop power supply at 3:00 p.m. on February 5th. When the opening time is 24 February 20th, it will be three days ahead of schedule and approved by the municipal management office.

3. Guangzhou Zhongda textile market: the fabric professional market which has been leading the trend of the domestic market trend. The opening time has been adjusted from February 2nd to February 10th (January seventeen), and then adjusted to February 20th.

4, Shishi International Textile City: industrial enterprises peak start time: February 10th (January seventeen) start the scope of the Shishi hi tech Industrial Development Zone; February 11th (January eighteen) started the scope of three printing and dyeing centralized control area; February 12th (January nineteen) started the scope of the Bao Ge Science Park, Bao Gai shoe city, Ling Xiu Pioneer Park, textile and garment industry development base; February 13th (January twenty) started outside the park business.

Six, various garment factories start up plan

1, the clothing factories for the domestic clothing market (including offline wholesale and electricity suppliers), which are mainly concentrated in cities such as Hangzhou and Guangzhou, and many villages and towns around Hangzhou have been sealed up. The owners and employees of the garment factories around the Zhongda market in Guangzhou are mostly Hubei (according to the estimate, about 70% of Hubei accounts). The Village rental housing surrounding the central and large commercial circle is in a state of power failure, and the commencement time can not be estimated at present. But a small number of factories are planned to start in February 10th (January seventeen).

2, export clothing factories, such customers are mainly concentrated in Jiangsu, Shandong, Liaoning, Hebei and other provinces, at present, most of these provinces start time in February 10th (after January seventeen).

Seven. The start time of foreign garment buyers and branding offices in China

Most of these institutions are concentrated in Shanghai. According to the requirements of the Shanghai municipal government, the opening hours have been postponed to February 10th (after the first month of seventeen). They worry that all kinds of export-oriented fabrics and garment manufacturers can be quiet for a few days.

In the critical period of prevention and control of the new type of coronavirus infection, the peak node for the start up of enterprises and the return of workers will greatly increase the flow and concentration of workers. In order to effectively prevent cross infection and curb the spread of the epidemic, we should pay attention to the following measures.

Protection of three treasures:

Mask goggles disinfectant

Three elements of epidemic prevention:

Ventilation and hand disinfection

Three level education:

Family epidemic prevention education, community epidemic prevention education unit, epidemic prevention education

Eradicate three violations:

Illegal access to secret places

Illegal entry and exit Key Epidemic Areas

Violation of epidemic prevention requirements in the locality

Four no harm:

No infection, no infection, no infection, no infection.

Four do not let go:

The source of infection is not cleared up.

The public is not free from education.

Epidemic prevention measures have not been adopted.

The responsible personnel are not punished.

Four no two straight:

No party

No strings

No handshake

Not getting together

Direct home segregation

Direct personal protection

Five check:

Check your mind (whether your consciousness is in place).

Check your temperature (if you have symptoms).

Check for protection (wearing masks)

Tracing the whereabouts (whether there is a history of epidemic areas)

Check responsibility (whether epidemic prevention requirements are implemented)

Epidemic prevention 6S Management:

Finishing (Seiri) - sorting emotions, paying attention but not panicky.

Rectification (Seiton) - strengthening control measures

Clean up (Seiso) - maintain environmental hygiene.

Cleaning (Seikeetsu) - pay attention to personal hygiene

Literacy (Shit-suke) - raising public awareness of prevention

Safety (Safety) - safe and healthy through the epidemic situation

8 suggestions before resuming work after the festival

01 suggested that the company should set up an epidemic prevention team.
In view of the epidemic situation, we should set up a company's epidemic prevention team, conduct personnel control and control, disinfect the environment, publicize the epidemic situation, and make preparations for the material, so as to ensure that all the epidemic prevention measures of the company are in place.

02 recommendations for post business resumption
With regard to the arrangements for the resumption of work hours after enterprises, the local epidemic situation should be adjusted to ensure that the epidemic situation is not spread.

03 factory recycling operation inventory
Around the "man machine material ring" and other aspects, inventory production operation, and formulate corresponding coping strategies.

04 environmental disinfection in factory area
All parts of the factory must be sterilized and sterilized before resuming factory to ensure the safety of the workers inside the factory.

05 return to work flow control measures
According to the situation of the epidemic area, the management and control plan of returning to work and the flow control measures during the resumption period were worked out.

06 management matters during leave period
Make clear the preparation that the company managers need to complete during the vacation period, and make the responsible person and the completion time.

07 post holiday resumption arrangements
The epidemic prevention team arranged the related work during the resumption period after the holiday, and made clear the responsible person and the completion time.

08 prepares list of protective products for epidemic situation
Prepare protective equipment for epidemic situation before resuming work.

Through the above eight points for reworking time, preparation before resuming work, arrangement of work arrangements before management at all levels, ensure that we can ensure normal return to work on the premise of healthy personnel.

Factory rehabilitation and rebirth pneumonia epidemic prevention plan

I. prepares for epidemic prevention in the early stage of resuming work and resuming production

1. the factory collects information about epidemic prevention knowledge, videos and publicity videos of the official institutions, and publicizes them in billboards, enterprises WeChat, electronic big screen and so on.

2. medical mask, KN90 or KN95 mask, protective clothing (mainly sanitation), protective glasses, 75% alcohol (absorbent cotton) /84 disinfectant, disinfectant hand washing liquid, rubber gloves, soap, thermometer, infrared thermometer, oximeter, sprayer, emergency traffic vehicle, emergency medicine, etc.

3. formulate emergency treatment measures including symptoms such as fever, fatigue, dry cough or dyspnea, isolation measures, and emergency plans for transportation to medical treatment routes and designated hospitals.

Two, work resumption, production and epidemic prevention work arrangements

1. factory departments at all levels to advance statistics of their personnel ready to work and report to the human resources department. Medical staff must be checked out of the factory except for employees who are reworking outside the urban area and the workers in the larger epidemic areas, and the relevant parties (including suppliers, logistics, outsourcing providers and dispatched parties). The first day of resuming work is especially important for all staff health checks.

2. remind employees to do self-protection and disinfection work in epidemic control during and after recovery.

3. all staff members after work found that their bodies were abnormal, such as fever, fatigue, dry cough or dyspnea. They must report to the management immediately and immediately disinfect the site and arrange the staff to go to the hospital in time and notify the company of the result of the diagnosis.

4. all employees, foreign personnel and visitors must enter the factory before receiving the door's infrared measurement of body temperature. The doorkeeper is responsible for recording body temperature, and the temperature is over 37.3 degrees Celsius. Foreign personnel also need to wear masks on their own.

5. do a good job in the registration and confirmation of foreign personnel. All foreign personnel must register at the gate post, name, telephone, and whether they have been to Hubei Province recently. According to the government regulations, enterprises are required to report self isolation. The factory will check the work according to the work attendance, and the local management department will check the situation of the house segregation by WeChat QQ video every day, and no penalty will be imposed.

6. public transport commuters must wear protective masks when they commute. After they get off the train, they should wash their hands in time. After commuter cars are used, they must be immediately sterilized and replaced.

7. before going back to work, the workers in the factories were sterilized once every day for every three days before going to work. Key areas - dressing rooms, offices, domestic waste dumping sites and smoking spots, are arranged to be sterilized once a day in the morning and evening. According to the technical book, the central air conditioning is filtered into the air.

8. confirm the safety and hygiene measures of the centralized canteens in various factories. The canteen forbids the purchase of live poultry and live meat without killing the live poultry, and prohibits the steam sterilization of lettuce and tableware. The processing links are strictly separated from each other.

The restaurant staff must carry out health check before daily, temperature measurement and keep test records. They must wear gloves, protective glasses, medical masks and protective shoes.
Disposable items must be disposed of in a lump sum. Repeated protective products must be sterilized and prohibited from repeated use without disinfection.

Utensils are uniformly distributed by service personnel. They are forbidden to pick up utensils on their own, and do not use their chopsticks and cutlery to pick up dishes from bowls and dishes.
Food sample keeping shall be carried out in accordance with regulations.

9. disinfecting hand sanitizers, soap and alcohol cotton balls or disinfectant wipes can be set up in toilets, canteens and other major establishments. Ask employees to wash their hands before and after meals, or wipe them with alcohol cotton balls and rinse with water.

10. doormen, service personnel, cleaning and greening personnel must wear masks and rubber gloves.

11. after resuming work, the factory organization checks the necessary inventory of protective supplies and accounts for the recent usage, purchases in advance and makes reasonable inventory. The material is released on demand as a daily protective material and emergency disposal material. When necessary, special personnel should be assigned to reclaim waste and replace new ones so as to prevent unauthorized disposal of infections.

12., in their respective jobs, non-human contact with the environment, should wear masks; in frequent contact with personnel positions and centralized operations closed positions (control room, etc.) must wear masks and other protective equipment. It is forbidden to spit everywhere, protect the mask waste and the mouth and nose secretions and wrap them in paper towels, and put them into the factory designated special medical waste barrels.

13. factory buildings, conference rooms, offices and other crowded places should be kept ventilated (without central air conditioning), at least two times a day, 30 minutes each afternoon.

14. the factory temporarily cancels or controls the number of participants to participate in collective activities and large meetings before the stop of the epidemic prevention period, so as to minimize or stop public travel and gatherings. If necessary, report to all levels of management and obtain approval.

15. do not believe in rumors, do not spread rumors, and strictly prohibit the use of social media to spread false information to create panic.

16., if we do not act, act slowly or act in disorder, we must promptly catch up with the accountability and accountability of those who engage in formalism and bureaucratism to report concealment and omission of the epidemic situation, and release the strong signal that we must firmly implement and not relax.

Contingency plan for infectious disease outbreaks in Enterprises

Key areas and recommendations for personal protection

First, which areas of office are high-risk areas (wearing masks)
The new coronavirus is mainly transmitted through droplets in the air.
The air is out of circulation.
The density of personnel is large.
People are in frequent places.
They are all high-risk areas.

At risk level:
1. elevator room
2. canteen / Restaurant
3. Office

Most dangerous: elevator room
The elevator room is extremely air tight.
Don't superstition the "disinfect" paper.
Only a certain concentration of alcohol can dissolve the outer membrane of coronavirus.
Alcohol, however, is extremely volatile.
Unless an hour is arranged for a person to disinfect the elevator room with alcohol,
Otherwise, stick a sterilized note to deceive yourself.
And the danger of elevator rooms is invisible.
Someone just left after coughing or sneezing.
You thought you walked into the deserted elevator room.
In fact, it is full of droplets.
Your fingers on the elevator buttons are also covered with droplets.

Recommendation:
1. you must wear a mask when taking the elevator.
2. conditional units must be frequently sterilized between elevators.
Especially the button area.

Secondary high risk: canteen / Restaurant
A crowded area lined up for meals or meals.
It is the area where people have the largest traffic and the highest density.
Joking, do you want to eat with a mask? It's science blind.

Recommendation:
1. take off the mask at the last minute when you sit down.
2. avoid face to face meals and avoid eating.
3. avoid eating together.

High risk three: Office
Where there is a person, there is a risk of infection.

Recommendation:
1. wear masks and maintain moderate distance of conversation.
2. keep good ventilation at all times.
3. necessary alcohol disinfection for doorknobs, keyboard, mouse, stationery and desktop.

Two. Wash hands frequently and wash your hands frequently (important things say three times).
1. to the unit, wash your hands for the first time.
2. wash your hands before eating.
3. to the elevator room, the high risk area of the dining hall, come back and wash your hands.
4. wash your hands immediately after you go out.
5., wash your hands before touching your face, especially your nostrils and eyes.

Three, scientific alcohol disinfection
It doesn't make sense to sprinkle on your body like perfume.
The key is to disinfect the parts and objects that our hands will touch.
For example, mobile phones, door knobs, elevator buttons, mouse and keyboard, bicycle handles, work permits, stationery, chairs, etc., please look at your actual situation and screen and focus on disinfection.
Alcohol should be sprinkled and covered with articles. It can be dried naturally without cleaning.