Design Of Whole Tongue Shoe -- Design Features

The tongue type shoe refers to the tongue tongue type shoe with tongue and shoe. Because of the continuous opening of the tongue, the front and back tongue share a back midline. The front pattern of this kind of shoe is a straight line, which is not consistent with the curve of the last surface. Therefore, it is necessary to use a special way of picking up the handle to convert the curved midline into a straight line, that is, the usual method of conversion. Similar to the whole tongue type shoes, full front shoe, full shoe and so on, all need to be converted to take off.

    Design features of tongue shaped shoes
Tongue shaped shoes are also a large product of tongue type shoes. The main points of design are not very different from those of transected tongue shoes, only to design a continuous tongue with the help of a special switch.

1. characteristics of shoe last
The shoe last used for designing tongue type shoes is the same as that of transected tongue shoes, all of which belong to the same lingual footwear. However, we should pay attention to some of the tongue shaped shoes that have been transformed. The two sides of the tongue can not be turned freely by the rubber band. The difference between them is whether the tongue of the tongue shoe can be turned freely.

2. features of upper structure
The tongue of the whole tongue shoe is longer, and the position of the center is slightly lower. Generally take OO '= 30 ~ 35mm.
In order to highlight the integrity of the whole tongue type shoes, the structure of the front press is usually used to show the whole tongue. Decorative changes are mostly concentrated in the front Baotou, tongue, side and other parts, generally will not easily destroy the front pressure after the connection.

Characteristics of 3. components
The characteristics of the whole tongue shoe part are on the front side, and the tongue and the front shoe are connected into a whole. This shape enlarges the area of the front support, showing a boldness, especially a saddle shaped surface forming a complete curved surface, giving people a sense of flatness and comfort. It often meets the situation of the former gang and the latter Gang, which increases the difficulty of the design and, of course, has a higher level of technical treatment. The back of the tongue type shoe is usually decorated without objects such as cross arm, so that customers can directly see the structure of the whole shoe tongue.
Some finished products of tongue shaped shoes do not see any problems in the design room. Saddle shaped surfaces are smooth, but in the store for a period of time, there will be tiny wrinkles on the backs of shoes, as if they were crossed. If such a situation occurs, it also belongs to the failure of design because it is unable to handle the test and can not stand the test of time.
In order to make the front tongue and the front part share a middle line, there are many ways to achieve the help of the front parts, which is achieved by "two times". The rotation method is achieved by rotating the front part or turning the shoe tongue. Years of practice have proved that these methods are feasible, but at the same time there is a common problem, that is, we should constantly try to help and constantly modify. Because in the process of the last one, in the process of rotating the template, in the process of sticking the last paper to cut the mouth, what changes and amount of change have occurred, and no accurate data have been left. Therefore, when the model is restored, it can only be explored, that is, to gain experience in the groping, and add a little or a little correction.
In structural design, there are strict rules and requirements in order to show clearly the changing relationship, location and magnitude of changes. Because the conversion and fetch itself is mandatory, it is contradictory to the natural state of the saddle surface of shoe last. Therefore, it is necessary to adopt the method of artificially increasing the "switch over" to achieve the purpose of reduction.

4. characteristics of inlay connection
The general relationship is that the front Gang is pressed behind, and the design is to help the staff before, and then help or help after loosing the mouth.

5. modeling changes of the whole gang.
Due to the relatively large area, sometimes the need for proper decoration is necessary. See color E series.
The color picture E-l is a regular whole tongue shoe. The tongue and shoe mouth are designed along the mouth. It is noted that its small horse head is a part added later, and there is a protrusive incision in the position of the break, which increases the proportion of the tongue.
The color picture E-2 is a whole tongue shoe with flowers in Baotou. The front and back sides are joined together, with a flower spike on the tongue as decoration.
The color picture E-3 is a modified tongue type shoe. The front and rear sides are joined together, and the decorative strips on the tongue are inserted into the back.
The color picture E-4 is a typical whole tongue shoe. The shoe is simple, only the front and back two main parts. On this basis, changes in the shoe tongue decoration strip, the changes in the front Baotou, the changes in the package after the split, and the changes in the shoe tongue connection are also carried out. The position of the lock line is very important, and the position is too high to fit into the shoes. Low position shoes do not follow the feet, usually on the oQ line.
The color picture E-5 is usually called the ingot shoe, and the shoe bend is similar to the shape of the "treasure". This is a "tongue less" tongue shaped shoe, which means that the tongue is gradually compressed and shortened until it does not change. Because of the use of conversion take off, so as an integral tongue type of shoes alternative products.
Color picture E-6 is a kind of full service slippers. It is a popular footwear in recent years, and it is mostly used for women's shoes. Because there is a back, so it belongs to the full shoe footwear: and because the latter is very short, it can not play the role of holding the feet, it can only wear like slippers, so it is called full slippers. From the structural point of view, after the rise is similar to the Yuanbao shoes, also used to switch to take off, also belongs to the tongue type shoes of the alternative products.