Design Of Imitation Gallbladder Shoes

Gallbladder shoes and cover shoes are a kind of flower color change, can also be used for the design of women's shallow shoes.

Design of 1. tongue type gall bladder shoes

As shown in figure 3-3-13, the upper is made of shoes and inside and outside.

The width of the gallbladder is controlled at the vertical line passing the J point.

 

First connect the back midline, set the width control of the shoe gallbladder, design the shape of the shoes directly, and make the craft sew at the front end of the half section.

Because the front door of women's shallow shoes is located at the front, it eliminates the trouble of handle and does not need to prepare copy board.

Note: this method is applicable only to women's shallow shoes, but not for full shoes.

2. the design of half gallbladder wrinkle shoes

As shown in Fig. 3-3-14, there are wrinkles on the Wai Wai fence, just like the fake bottom shoe, and pressed on the half girth.

 

After the accident is pressed on the inner half of the bar, it is changed from the hole string to the stubble seam, and the bottom is directly added to the amount of the bandage.

This is different from the profile of the fake bottom shoe.

The basic template is shown in figure 3-3-15.

 

The dotted line in the picture adds a volume to the opening pattern.

Double row holes are arranged on the shoe covers, the spacing between the two rows of holes is 6mm, and the amount of 5mm hem is added on the surround strips, and the stubble rate sewing method is adopted.

The pleat part is trimmed and trimmed, and the front and back edges are folded.

Cross arm parts are also used as shoes for daily use.