Design Features Of Sandals

The design of the full pair of sandals should be done with a full pair of sandals last, according to the design rule of the full pair of shoes.

The difference between the full shoe last shoe and the full shoe last is mainly on the last arch. The data that can be found at present are men's leather sandals last type size, compared with the same type of male masculine last, only the tarsal circumference is increased by 4mm, and the other sizes are the same.

Male No. 250 vegetarian head last square: 243. 5mm, the same type of Sandal Shoe last 247.5mm, a difference of 4mm.

The increase of the width of the sandals of the sandals is to meet the requirements of the length of the band after the sandals. Therefore, when designing the tongue type sandals or the ear sandals, you can choose the tongue type last or prime last.

The hollowed sandals are a special change of the sandals. The former is Baotou, followed by the main heel, and the middle part is a permeable structure. The front and back sides are usually Ding band, and the back side is connected by the drill belt. Taking into account the requirement of the girth, the full length sandals should be used. If the vegetarian head is used, the height should be increased from 2 to 3mm on the instep.

When designing women's hollow sandals, ladies' full complement sandals should also be used. If the female head is used last, the tarsal circumference is smaller. If the female sandals are used, the head thickness is lower. Although there is no data available for women's full support last year, there is indeed a hollow female sandal last in the production of the enterprise: the long and short weight is similar to that of the female head, the curve of the instep is obviously curved, similar to the real instep, the rear body is more fat, the front part has a vertical shape at the front end of the joint, which has left the position for the design of the front tripping belt, and the front of the front has different head changes, similar to the predecessor of the full shoe last shoe. This type of women's hollow sandals is still larger than the same type of prime shoe last.

There is also a cool boot last for sandals designed for boots. Because it is not very popular in China, there is no relevant technical information to be found. However, from the point of view of use, it is achieved through transformation of high waist last. Modify the allowance to control the length of the last bottom; modify the thickness of the head to suit the production of the front empty boot; the shape of the rear body changes little; it meets the requirements of the boot; the ability to hold feet and legs is adjusted by the opening and closing function of the shoelace.