Knowledge Release: Structure Making And Using Method Of Humidifying Heating Furnace For Silkworm Tools

　　 stay Silkworm chamber The use of heating and humidifying silkworms not only meets the requirements of growth and development of silkworms, but also has the following characteristics: Investment The advantages of low performance, good safety, sanitation and fresh air are ideal for warming the silkworm chamber. Appliances 。

Basic structure;

The furnace is a furnace with iron sheet structure, which integrates heating and humidifying. It mainly consists of three parts: furnace body, furnace cover and smoke outlet pipe. (1) furnace body:

The furnace body is a hollow cylinder without a lid. The height is 96 centimeters and the diameter is 60 centimeters.

Furnace door: it is suggested to open a furnace door with a length of 15 centimeters and a height of 8 centimeters to 15 centimeters away from the bottom of the bucket, and make a plug to adjust the size of the furnace door.

Grate: from the top of the furnace door to 15 centimeters, a furnace shed is fitted with iron bars in the barrel.

Smoke outlet: open a circular hole with a diameter of 6 centimeters in the barrel 1~1 and down 10 cm, and connect it with the right angled round elbow.

2. Lid:

Make a furnace lid slightly larger than the outer diameter of the furnace. The cover is 4 centimeters deep and 7 centimeters deep. Next, cover the mouth of the furnace. In addition, the silk net reminds you that you should pay close attention to preventing leakage of smoke.

3. Smoke pipe:

The diameter of the tube is 6 centimeters, and the length depends on the size of the silkworm chamber and silkworm season. If enough temperature is needed in the silkworm chamber, the pipes will stay long indoors and make full use of the heat emitted from the pipes.

Basic application;

1. Fuel preparation:

Choose dried sawdust, broken wood and so on.

Loading:

In the center of the furnace, a bunch of firewood or dried tree sticks with a diameter of about 8 centimeters is placed on the top of the stove.

3. Lighting:

It is suggested that the furnace be ignited from flammable material at the furnace door. After 20 minutes, the furnace lid will be moved to the interior and the smoke pipe will be opened to the outside.

4. Adjust temperature and humidity, temperature:

The temperature can adjust the plug of the furnace door. When the temperature is too high, the doors and windows can be ventilated or moved to the outside to cool down. Humidity: humidity is large. No water or windows can be heated on the lid. Heat and humidity can be changed. Humidity is small, hot water is added to the lid or water is sprays up on the pipe to make it suitable for temperature and humidity.