• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Basic Knowledge And Examples Of Pattern Design For Skirts [Figure]

    2010/12/28 15:02:00 77

    Pattern Design Of Skirt

    The simplest way to design a skirt is to divide the basic form of a two piece half skirt into several parts.

    Cutting piece

    "


    Usually, the skirt prototype is a simple half cut.

    skirt

    But because it is made of paper, it can be folded and used.

    The same pattern can be used for the front and rear centerlines of the four pieces of skirt. The front and back pieces are divided into two parts.

    -


    Or the same basic pattern, 4 pieces will be further folded to get 8 pieces; again the same fold, you can make 8 pieces into 16 pieces.

    The prototype of the skirt can be divided into 6 pieces, which can be further divided into 12 pieces.

    6 piece skirts are usually called "Apron".

    This is a familiar style that can be made from it.

    Design

    A variety of skirts.

    In principle, each basic skirt type (standard skirt, straight skirt or full round skirt) can be divided into any number of cutting pieces, which can be the same or different.

    If we make full use of the "line" or the basic type of change, we can get quite a lot of styles.

    In fact, some shape lines are more suitable for multi chip designs.

    For example, the molding line of full round skirt is warped outside.

    Others are suitable for skirts with less cutting.


    The style of the skirt is varied through slices, and the addition of loose weight between the cutting pieces can further increase the style of the skirt. The way of changing the skirt pattern also includes changing the use of the fabric texture, such as the skirt with a skew or cross direction.

    Add all buttocks to all shapes and sizes of skirts, as well as many other specific cutting methods.


    Example: simple multi piece skirt (see photo)

    Style A 4 skirt, the front middle stitch is replaced by the buttons along the front centerline, so there is a need for a door (at least 3~4cm).

    At the beginning of the picture, place the original position at the edge of the paper 4cm, leaving the width of the door open.

    The welt can be single autocratic or linked to the front piece. The noodles should be at least 4cm more than the width of the door, that is, the buttonhole should be 7~8cm.

    Usually, the welt is only cut on the fabric, like the turning angle, and does not need to be included in the cutting of the pattern.


    Because this is a full round skirt, so it is used for one-piece skirts or "

    Western-style clothes

    The side stitch will have less savings when it comes to skirts.

    In order to make the waist fit, if necessary, add a small province on the back center line. If it is to make a dress skirt, then there can be no provincial road, and all sutures should be straight lines, and the prototype is only suitable for the dress body.


    The direction of the straight yarn is indicated on the pattern (SG).

    Because the front piece has buttonholes, the center line should be straight before, and the rear piece should be straight from the middle axis of each piece, because this will increase the draping feeling of the skirt.

    Generally, the posterior middle suture is almost straight, unless sometimes it is inclined to make the contour line more balanced.

    skirt

    Spread evenly around the body, but not at the center line, but outward at the side seam. This will happen if the centerline is straight.


    The style B 8 piece skirt is made by cutting 4 pieces of skirt into two halves from the middle.

    First, draw the front and back parts of the prototype skirt prototype, then fold each piece as if it were a straight yarn to mark.

    Sometimes a small part can not be fully folded, but it doesn't matter.

    The 1/4 round skirt prototype is also used in this type.

    It uses the advantages of the prototype skirt prototype, that is, having a standard geometric shape, not necessarily a part of the circle.

    The widened bottom pendulum (over the original 160cm) can start from the hip line or the lower point (the dotted line).

    Each skirt is still straight in the middle.


    The pattern C divides each piece of 6 skirts into twelve pieces.

    In fact, only the front and rear sides are used, because the front and back pieces are half sided.

    Since it is a fully round skirt, a small province should be provided for the tight waist of the skirt.

    The center of the skirt is straight yarn.

    This type of skirt has a low swing width of about 2.45m, but

    Apron

    The number of 12 stitches is =24, so the width of each piece is generally small, that is, 3~4cm.

    • Related reading

    T-Shirt Design Course Basic Knowledge Of T-Shirt Design

    Learning Area
    |
    2010/12/27 17:40:00
    24

    服裝設(shè)計的三個前提原則

    Learning Area
    |
    2010/12/27 17:38:00
    39

    Original Power Of Fabric Design

    Learning Area
    |
    2010/12/27 17:33:00
    27

    彝繡之鄉(xiāng)欲做大做強 (圖)

    Learning Area
    |
    2010/12/27 11:25:00
    46

    職場男士服裝搭配知識

    Learning Area
    |
    2010/12/27 9:10:00
    55
    Read the next article

    7 Key Points For Making Money In Clothing Stores

    Some people say that the clothing industry is a low threshold industry, which is very easy to enter. Indeed, entering the garment industry is not an easy task, but not everyone can manage a good clothing store so that it can create abundant profits.

    主站蜘蛛池模板: fuqer2018| 中文字幕一区二区三区免费视频| 老司机深夜影院| 国美女福利视频午夜精品| 久久精品国产久精国产一老狼| 精品香蕉在线观看免费| 国产精品无码免费专区午夜| 久久99精品久久久久子伦| 永久中文字幕免费视频网站| 国产在线精品一区二区不卡麻豆 | 四虎成人精品无码| 91精品导航在线网址免费| 日本三级香港三级人妇m| 亚洲精品免费视频| 色费女人18毛片**在线| 国内精品久久人妻互换| 久久99精品久久久久久清纯| 残虐极限扩宫俱乐部小说| 国产五月天在线| 67194在线看片| 成人性生交大片免费看午夜a| 亚洲国产片在线观看| 精品精品国产高清a毛片| 国产男女猛烈无遮挡免费视频网站| 一级人做人爰a全过程免费视频| 欧美xx性在线| 偷自拍亚洲视频在线观看99| 香蕉97碰碰视频免费| 国产馆精品推荐在线观看| 中文字幕久精品免费视频| 欧美va亚洲va香蕉在线| 免费人成视频在线观看网站| 香蕉视频网页版| 国产精品资源在线| 一级黄色片网站| 草莓视频黄色在线观看| 国产精品网址你懂的| 一二三四视频免费视频| 日韩毛片在线免费观看| 亚洲欧美国产另类视频| 精品人妻少妇一区二区三区|