Ten Requirements For Garment Structure Design Drawing

1, structural parts.

Standards should be accurate, clear, harmonious and unified.

2, the lines in the picture are thick, thin and straight.

The intersection of straight lines must be 90 degrees. The intersection of straight lines should be consistent and smooth, and the intersection of the curves should be round and smooth.

3, all kinds of cartographic data, yes.

The amount of shrinkage, the shrinkage of sewing process, the amount of expansion of the provinces, pleat and pleat should be enough.

4, the direction of the warp, weft, slant, stripe, lattice and light should be clearly marked.

5, the main parts, auxiliary parts and components should be complete and reasonable.

6, the volume of the sample and the welt should be accurate and meet the requirements of the process.

7, drawings and

The ratio of physical sample should be drawn according to the ratio of 1:400, 1:500 and 1:600````````, and the proportion of pattern should be indicated.

8, the whole pattern,

It should be correct, standard, clear, clean and beautiful.

9, the size of the drawing units is determined by the national legal unit of size: CM (centimeter), of course, some factories are also useful in inches.

10,

The terms and symbols should be unified and standard.