Home >

Attention Should Be Paid To The Excessive Ph Value Of Textile And Clothing Products.

2011/1/25 11:26:00 59

Textile and apparel products exported by a certain inspection and Quarantine Bureau recently

PH value

A total of 58 batches of surface accessories and garment samples were selected from the spot checks, and the unqualified rate was 28.2%.

From the test results, the unqualified samples showed a high pH value as a whole.

There are mainly several reasons for the failure of pH value: the first part is

enterprise

In order to reduce the cost, purchase unqualified surface accessories products for production; two, some enterprises lack effective management in the face accessories suppliers, and the quality of the accessories is not effectively verified; three, some enterprises use more chemical substances in the stage of clothing production after finishing, such as imitation, grinding and so on, resulting in the appearance of qualified pH and the unqualified garments. Four, some enterprises are not strong enough to be released.

clothing

The national standard of pH value is not taken seriously.

In view of these problems, the inspection and quarantine department reminds the relevant enterprises, first, raising the risk awareness of products, lowering standards and reducing quality will eventually lead to the survival crisis of enterprises.

Two, we should grasp the technical regulations at home and abroad and improve the initiative of implementing mandatory standards.

Three is to strengthen the purchase and management of raw and auxiliary materials, and strengthen the production quality inspection of raw and auxiliary materials suppliers.

Four is to strengthen the management of production links.

Eliminate the two pollution in the production process.

In particular, it is necessary to choose a standardized factory with good quality and good reputation, and make sure that the pH value of textile and clothing meets the relevant standard requirements by using technical methods and management measures.

Five, we should improve the level of internal testing, strengthen laboratory construction, strengthen learning and communication with authoritative inspection organizations, and enhance the ability of self-examination and self-control.