• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Cutting And Placing Code: Correct Value Of Proportional Cutting Formula

    2011/6/15 11:09:00 73

    Proportional Clipping

    Proportion

    Tailoring

    The most important thing is the value of the formula and the rationality of the formula.

    There is no more standard formula to locate, and it is also difficult for industrial board making. In order to grasp the skills of formula application, we should analyze the following aspects:


    Formula, age and body shape analysis


    Under normal body size, they were divided into young, middle-aged and aged groups according to their age.

    Set the formula according to different ages.

    Young people have smaller body size and smaller range of circumference, but because of their differences in height, the added value is slightly larger in terms of formula, such as sleeve cage depth, sleeve opening, shoulder height and crotch.

    The difference of body shape between the middle age group is bigger, the change range of circumference is larger, the increase crotch value should be smaller, and the old people's girth change is bigger, and the body size difference is bigger. The crotch value should be smaller. The increase crotch value is a formula with 2 / 10 circumference, so the depth increases by 0.2cm when the girth increases every LCM. When using 1.5 / 10 circumference to increase LCM, the depth will increase by 0.15cm; the 1 / 10 circumference will increase 0.1cm.

    The middle-aged people changed greatly, using the 1.8 / 10B+ fixed number or 1.5 / lOB circumference + fixed number.

    The degree of circumference of elderly people varies greatly.

    For the chest circumference, the minimum chest circumference is about 95cm, the large is about 120cm or even larger. Such a change range, such as the use of 2 / 10B number, is calculated by increasing the LCM circumference of the cages and increasing the 0.2cm by 0.2cm.

    In this way, the speed of the crotch increase is too fast for the old body. Therefore, the 1.5 / l0B bust + fixed number or the 1 / 10B plus number should be used.

    In general, the smaller the number is, the faster the speed of the crotch is increased, and the more the number is, the more extensive the adaptation will be and the slower the speed of the crotch.


    Formulation analysis


    The current formula is varied. Useful values, useful formulas and useful formulas can also cause some disadvantages to the push plates in the board, because every link in the garment must be deduced in a certain proportion, so that the size of the plate is proportional to the trumpet. In the application and search formula, the size of the smallest size is chosen first, then the size of the largest size is determined, and the difference is released from it.

    For example, the chest size of the small size is 90cm, the bag mouth should be about 13cm, the large chest circumference is 100cm, the bag mouth should be about 14cm, and the formula can be known as 1 / 10B+4cm.

    If the foot of the trousers is in the mouth, if the hips of the trousers are 90cm, the feet will be 18cm, using formula 1 / 10+9=18cm, 1.5 / 10H+4.5=18cm or 2 / 10H=18cm; when the hips are in llOcm, then 1 / 10H+9=11+9=20cm, 1.5 / 10H+4.5=2lcm, 2 / 10H=92cm, from which the size of the crotch value will be chosen.

    Popular

    If the foot is big, you can deduce the formula.


    Matching analysis of formulas


    The formula is related to the final effect of the industrial board and push plate, and can not be matched at will. For example, chest width and shoulder width, sleeve cage depth and sleeve opening, sleeve cage width and sleeve hypertrophy should be closely combined, otherwise, according to a certain proportion formula, the maximum number will be difficult to match.


    L, foot width and shoulder width


    The width of the front chest and shoulder width should be synchronized when the formula is set. The chest width is 1.5 / 10B+3cm, then the chest width increases by 4cm. The total shoulder width is increased by 1.2cm. The width of the chest is increased by 1 / 2, and the 0.6cm is synchronized with the value of the front chest width. The number released will not change. The width of the front chest is calculated by 1.8/10B. Then the chest circumference increases by 4cm, the front chest width increases by 0.72cm, and the shoulder plus 0.72cm is also too large.

    Another 1.5 / 10B calculation is that the front chest circumference and the rear chest circumference are mostly 1 / 4B or 2.5 / 10B, and 9.5 / 10B 1.5 / 10B actual sleeve width is 1/10B, and the value of 2 / 10B is added before and after, then the general sleeve hypertrophy is 2 / 10B number.


    2.

    Scye Depth

    Sleeve opening


    If the actual sleeve is deep, then the 2 / 10B+ fixed number -0.5 / 10B (shoulder diagonal) actual sleeve depth is 1.5 / 10B+, the right sleeve depth is 1.5 / 10B to calculate the best value, so that the value of the crotch is consistent; if the 1.5 / 10B+ number is used to calculate the cage depth, the actual sleeve cage depth is 1.5 / 10B+ number - 0.5 / 10B, the actual sleeve depth is the number of B / calculation, and the sleeve depth must be determined according to the number of fixed / fixed numbers. The depth of the sleeve is usually calculated by 2 / 10B, and it is also calculated by 1.5 / 10B.

    • Related reading

    Cut And Code: Calculation Method Of Jeans Shrinkage Rate

    Learning Area
    |
    2011/6/15 11:05:00
    75

    Cutting And Placing Yards: Rear Warpage And Conversion Of Skirt Trousers

    Learning Area
    |
    2011/6/15 10:46:00
    28

    Cutting And Placing Code: Calculation Of The Size Of Woven Garments

    Learning Area
    |
    2011/6/15 10:36:00
    34

    Cut And Code: Pay Attention To Seven Matters.

    Learning Area
    |
    2011/6/15 10:33:00
    14

    A Pair Of Scissors To Witness The Fashion " Transform "

    Learning Area
    |
    2011/6/15 10:20:00
    15
    Read the next article

    The War Of Grabbing People Continued To Heat Up &Nbsp; "Labor Shortage" Played A Prelude To Industrial Pformation.

    "Zhejiang labor gap 7 million" and "Guangdong gap 1 million", in 2011, the coastal provinces' "labor shortage" was upgraded again.

    主站蜘蛛池模板: 国产高清一级片| 永久黄色免费网站| 无码人妻一区二区三区在线视频 | 美国式禁忌矿桥矿17集| 欧美亚洲日本另类人人澡gogo| 国产综合在线观看| 亚洲日本香蕉视频观看视频| 91午夜精品亚洲一区二区三区| 精品无码中出一区二区| 强行被公侵犯奈奈美| 午夜dj在线观看免费视频| 一本一本久久a久久精品综合麻豆 一本一本久久a久久精品综合麻豆 | 国产一区二区三区在线观看免费| 久久免费福利视频| 色狠狠一区二区三区香蕉蜜桃| 无码一区二区波多野结衣播放搜索| 国产jizzjizz免费看jizz| 中文字幕影片免费在线观看| 精品深夜av无码一区二区老年| 少妇熟女久久综合网色欲| 免费看污视频的网站| 99视频精品全国在线观看| 欧美老人巨大xxxx做受视频 | 狠狠色综合网站久久久久久久高清| 天天操天天干天搞天天射| 亚洲福利一区二区| 浮力影院亚洲国产第一页| 日韩内射美女片在线观看网站| 国产中文字幕电影| 一本色道久久综合一区| 激情综合色五月六月婷婷| 国产综合成人亚洲区| 九九这里只有精品视频| 色欲香天天天综合网站| 好男人官网资源在线观看| 亚洲欧美视频网站| 免费观看激色视频网站bd| 无码人妻丰满熟妇区毛片18| 免费a级毛片在线播放| 51精品国产人成在线观看| 日韩精品一区二区三区国语自制|