• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Changzhi Tsinghua Factory Helps Tiangong-1

    2011/10/1 15:08:00 39

    Changzhi Tsinghua Tiangong-1


    The launch platform, which carries the Tiangong-1 target aircraft and the long march -2F launch vehicle cluster, is very spectacular.


     
     

     


    In September 29th, China's first target aircraft "

    Tiangong-1

    The launch will be completed and the rendezvous and docking with Shenzhou eight will be completed. This indicates that our manned spaceflight project will reach a new stage.


     


    In this launch, Changzhi Tsinghua Machinery Factory is the only Aerospace Launch support system manufacturer in China. What has been done in the early stage?

    Recently, the newspaper reporter entered

    Tsinghua factory

    To explore the little-known story behind the stage.


     


     

    The last batch of Tsinghua players

    Withdrawal


     


    At 20:16 on September 29th, Tiangong-1 launched into a negative hour.

    With the instruction of the commanding officer, Yang Bo, a member of Changzhi Qinghua machinery factory, took a closer look at whether the 4 wind protection rods fastened on the foot of the long two F rocket were completely opened, and whether the platform cover plates leading to the guide slot under the rocket were all opened. After confirming that there was no mistake, more than 20 comrades from the launch site were evacuated from the safe passage by Yang Bocai.

    Opening the pull rod and opening the cover plate are the last two processes of the whole launching process, and Yang Bo's evacuation is the last batch of team members to launch the scene.


     


    The reporter joined Yang Bo, a 35 year old pilot at the Jiuquan launch center.

    According to his introduction, from July 19th to Jiuquan, he was responsible for overhauling, training, and driving, many times, and a few months.

    In the recent two months, Yang Bo experienced the heat, experienced the wind and sand, and overcome the acclimatization, with the hoisting, the pition, the launch, the next outstanding work.

    {page_break}


     


    Platform for overhaul upgrading


     


    According to the reporters, after the successful launching of "Shen seven" in 2008, according to the requirements of the General Armament Department and the China Aerospace Science and Technology Corporation, Changzhi Tsinghua machinery factory has dispatched many technical backbone such as assembly, hydraulics, electrical appliances and technology to the Jiuquan satellite launch center in 2009. It has carried out overhaul and upgrading of the launch platform that has been used for 12 years to meet the needs of the new launching mission.


     


    The two time, Fan Huimin, who went to the Jiuquan satellite launch center to install the launching platform, was the leader of the assembly of large-scale structural components.

    He told reporters that in more than two months, he led 6 players in accordance with the design requirements, has undertaken several launches of the task of the platform from the mechanical system, hydraulic system, electrical system, pneumatic system and other aspects of technology upgrading.


     


    On the morning of September 28th, Pan Yulin, deputy director of technology and quality of Changzhi Tsinghua machinery factory, told reporters that the updated launch platform has greatly improved the accuracy, adaptability and reliability of the launch platform, so that it can well meet the needs of the new COSCO launch tasks such as Tiangong-1.


     


    The first stage of the rocket pformation platform is outstanding.


     


    At 8 hours in September 20th, the opening of the 350 ton factory building of the vertical assembly test workshop of the Jiuquan Satellite Launch Center opened. The Tiangong-1 target vehicle and the long march -2F launch vehicle assembly slowly moved out of the assembly test plant gate under the load of the launch platform.

    The 70 meter tall combination sits on the deep blue launch platform, appearing in the clear autumn sky.

    Spectacular

    Incomparable.


     


    At 9, 8 jacks on the bottom of the launch platform were gradually retracted, and the walking mechanism composed of 16 wheels began to run smoothly.

    The span of 25 meters and 1500 meters long, carrying the "Tiangong-1" launch platform for 1 hours, 7 minutes.

    Compared with the past, the improved launch platform has nearly 20 minutes' travel time.

    At the moment of accurate entry into the launch site, thousands of staff, reporters and spectators at the scene made deafening cheers.


     


    Yang Bo, who has been following the pformation of rockets, listened carefully to supervise the walking mechanism on the launching platform.

    When the assignment was finished beautifully, he could not help running to call the scene photographer to pose for himself before the nameplate with "Changzhi Tsinghua Machinery Factory".


     


    Standby platform first flew "God eight"


     


    In the 90s of last century, Changzhi Tsinghua machinery factory received two launch platforms.

    It was installed in Jiuquan satellite launch center two times in 1997 and 1999.

    The launch platform is equipped with vertical, vertical, vertical and long distance test and launch control. The three vertical and one remote mode is at the international advanced level.

    The first launch platform has completed a number of large-scale flight test missions from "Shen Yi" to "Shen seven", and second launch platforms have been in standby mode.

    The "Tiangong-1" and "Shenzhou eight" to complete the rendezvous and docking, the interval launch time is short, the backup launch platform finally came into operation.


     


    The two rocket appeared at the launch site at the same time. It is the first time in the history of space launch in China.

    The "Long March two F remote eight" launch vehicle for launching Shenzhou eight spacecraft has arrived in Jiuquan to begin assembly on the standby launch platform.

    The second active launch platforms that are overhauled and re upgraded have the same good and superior performance as the former. They can undertake the completion of more difficult flight missions.



     

    • Related reading

    2011 Shanxi Webmaster Webmaster Conference Is Held.

    Local hotspot
    |
    2011/10/1 10:42:00
    45

    Wenzhou's "Runway" Boss Will Return To &Nbsp; The Liabilities Will Exceed 2 Billion When Fleeing.

    Local hotspot
    |
    2011/10/1 10:06:00
    71

    Humen Clothing "Northern Expedition" Victory &Nbsp; Domestic Brand New Brand Has A Bumper Harvest.

    Local hotspot
    |
    2011/9/30 17:15:00
    21

    Eleven Golden Autumn High-End Linen Clothing Entered China's Ordinary People's Homes

    Local hotspot
    |
    2011/9/30 17:07:00
    23

    Lingnan Beijing Opera Shows Hot Debate

    Local hotspot
    |
    2011/9/30 17:03:00
    33
    Read the next article

    男裝服飾品牌卡奴迪路獲“廣東省優秀自主品牌”榮譽

      高級男裝品牌卡奴迪路榮獲“2010年度廣東省優秀自主品牌”榮譽,此為廣東省企業聯合會與企業家協會2011年評出,其參照國際通行做法,以2010年企業營業收入為基本標準,綜合企業的其他條件,經審核委員會審定而評選出來。

    主站蜘蛛池模板: 无码人妻精品一区二区三区蜜桃| 人妖在线精品一区二区三区| 精品一区二区三区在线视频观看| 日本中文字幕乱理伦片| 国产亚洲精品仙踪林在线播放| 国产aa免费视频| 久久久久亚洲AV无码专区首JN | 最近的中文字幕大全免费版| 成人18免费网站在线观看| 国产欧美精品一区二区三区四区 | 亚洲午夜精品一区二区| 真实男女xx00动态图视频| 欧美免赞性视频| 国产欧美另类久久精品蜜芽| 久久青青草原亚洲av无码麻豆 | 精品小视频在线| 婷婷激情五月网| 人人妻人人做人人爽精品| 97精品伊人久久大香线蕉| 美女张开腿让男人桶爽国产| 性xxxfreexxxx性欧美| 免费看特级毛片| 99re这里只有热视频| 欧美日韩国产另类一区二区三区| 国产精品va一区二区三区| 久久综合国产乱子伦精品免费| 视频在线观看一区| 性一交一乱一伦一色一情| 人人玩人人添人人| 无人码一区二区三区视频| 最新国产在线观看| 国产av人人夜夜澡人人爽麻豆| 一级毛片一级毛片一级级毛片| 火影忍者narutofootjob| 国产精品国产精品国产专区不卡| 五月婷婷狠狠干| 老扒的幸福时光| 天堂网www在线观看| 亚洲人成色7777在线观看不卡| 韩国18福利视频免费观看 | 狠狠热免费视频|