• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    The Printing And Dyeing Industry Has More Stringent Access Conditions, And The Project Must Pay Attention To Energy Conservation And Environmental Protection.

    2008/3/18 0:00:00 10284

    Environmental Protection

    In order to standardize the development of printing and dyeing industry, prevent low-level repetitive construction, reduce pollution, protect the environment, promote the adjustment of textile structure and achieve coordinated and sustainable development, recently, the NDRC and relevant departments formulated the "printing and dyeing industry access conditions" (hereinafter referred to as "access conditions"), and put forward higher requirements for energy saving and environmental protection in new or reconstruction projects.

    In terms of technology and equipment, the "entry conditions" stipulate that advanced or new technologies should be adopted for new or expanded printing and dyeing projects, and energy saving and environmental protection equipment should be adopted. The main equipment parameters should be on-line inspection and automatic control. It is forbidden to adopt the backward production technology and equipment that are included in the guidance catalogue of the industrial structure adjustment, the restricted category and the elimination class, and the second-hand pre-treatment and dyeing equipment that has been used for more than 5 years shall be restricted.

    The overall level of new or expanded printing and dyeing production lines should be close to or up to the international advanced level. The design and construction of cotton, chemical fiber and blended woven fabrics should be carried out in accordance with the code for design of printing and dyeing factories (GB50426-2007)].

    The continuous washing device requires better sealing performance and equipped with countercurrent, high efficiency rinse and heat recovery device.

    The bath ratio of batch dyeing equipment can meet the technological requirements of below 1: 8 (silk and wool dyeing 1 to 10).

    Stereotype (width drying) equipment should have on-line measurement and control device for main process parameters such as temperature and humidity. It has exhaust gas purification and waste heat recovery device. The outer layer of the box has good insulation performance. New printing and dyeing enterprises should have a certain economic scale. The annual production capacity of cotton, hemp, chemical fiber and silk woven fabrics should be more than 20 million meters / year. The annual production capacity of wool textile printing and dyeing design should be more than 2 million meters / year. The annual production capacity of knitted or yarn dyeing and printing design should be more than 2000 tons / year.

    In terms of environmental protection and comprehensive utilization of resources, the "entry conditions" stipulate that, first of all, environmental protection facilities for new construction or reconstruction and printing and dyeing projects shall be designed and constructed according to the requirements of "environmental protection design standards for textile enterprises" (GB50425-2007), and the "three simultaneous" system for simultaneous design, construction and commissioning of environmental protection facilities and main works shall be carried out.

    Enterprises with centralized sewage treatment facilities or permitted to discharge to urban sewerage systems in the area shall be equipped with suitable treatment facilities or adequate processing sites to be set up, and pollutant discharge targets shall be met by the centralized treatment plants or the requirements for water quality standards for sewage discharged into urban sewers; pollutants directly discharged into the printing and dyeing enterprises of water bodies must be equipped with comprehensive treatment facilities for comprehensive treatment of sewage and solid wastes, and automatic control and on-line monitoring of sewage treatment and operation should be carried out.

    The discharge of pollutants must comply with the total emission control targets of pollutants and meet the emission standards stipulated by the state and local environmental protection departments.

    Secondly, according to the principles of environmentally-friendly and comprehensive utilization of resources, new or expanded printing and dyeing projects should be selected according to the principles of environmental friendliness and comprehensive utilization of resources, which can be biodegradable (or easy to recycle) pulp; use eco environmental protection and high absorption rate dyes and auxiliaries; build cooling water, condensate and waste water recovery devices; and cotton based products with mercerizing technology should be equipped with alkali recovery devices.

    To achieve the goal of wastewater separation and reuse, the wastewater reuse rate should be over 30%.

    Third, printing and dyeing enterprises should vigorously promote cleaner production, encourage enterprises to carry out cleaner production audit assessment and energy audit, improve production technology and equipment, control the amount of pollutants generated from the source of production, and reduce the cost of production and terminal treatment.

    "Access conditions" also put forward requirements in terms of enterprise layout, resource consumption and social responsibility. New or expanded printing and dyeing projects must conform to these entry requirements.

    For printing and dyeing projects that do not meet the requirements for entry, the investment administration departments shall not record the entry conditions. The land administration departments shall not handle the land approval procedures; the environmental protection departments shall not go through the procedures for environmental approvals; the construction departments shall not handle the construction and start-up procedures; the safety supervision department shall not handle safety permits; the financing department shall not provide any form of credit support.

    This condition has been implemented since March 1, 2008.

    • Related reading

    Yantai Wanhua: Capacity Expansion Will Provide A Driving Force For Sustainable Growth.

    Market quotation
    |
    2008/3/18 0:00:00
    10371

    滾滾向前的企業軟實力大潮

    Market quotation
    |
    2008/3/18 0:00:00
    10381

    "Brand" And "Cluster" The Two Magic Weapons Of Jinjiang

    Market quotation
    |
    2008/3/18 0:00:00
    10273

    "Sports City" Brings New Wings For Marketing Of Shoes And Clothing Enterprises In Jinjiang

    Market quotation
    |
    2008/3/18 0:00:00
    10407

    Shoe Industry Is Intensive, And Win In The Channel!

    Market quotation
    |
    2008/3/18 0:00:00
    10310
    Read the next article

    Bishan Will Build National Quality Supervision And Inspection Center For Leather Products

    主站蜘蛛池模板: 国产精品99在线观看| 欧美中文综合在线视频| 精品人妻少妇一区二区三区在线 | 桃花阁成人网在线观看| 色妞色视频一区二区三区四区 | 日本红怡院在线| 国产视频精品免费| 别揉我的胸~啊~嗯~| 亚洲欧美日韩国产| 三上悠亚日韩精品| 野花直播免费观看日本更新最新| 日韩精品久久久肉伦网站| 国产性夜夜春夜夜爽| 亚洲成在人线在线播放无码| 一本色道久久综合网| 青青国产精品视频| 无码av岛国片在线播放| 国产成人综合欧美精品久久| 色综合色综合久久综合频道| 五月天婷五月天综合网站| 男女啪啪激烈高潮喷出GIF免费| 日本人六九视频jⅰzzz| 国产中文字幕电影| 乱码在线中文字幕加勒比| 2021年最热新版天堂资源中文| 精品久久久久中文字幕日本| 无码中文人妻在线一区二区三区 | 亚洲欧美日韩国产综合五月天| 18av黄动漫在线观看| 波多野结衣在线女教师| 国产精品永久久久久久久久久| 亚洲色图欧美在线| 一个色中文字幕| 日韩人妻精品一区二区三区视频| 国产欧美va欧美va香蕉在| 亚洲精品国产电影| 1000部拍拍拍18勿入免费视频软件 | 中文无遮挡h肉视频在线观看| 精品一区二区三区无卡乱码 | 人人添人人澡人人澡人人人人| 久久国产精品电影|